iTeh StandardsiTeh Standards
EURUSD
Your shopping cart is empty.
CEN

EN 1038:1995

(Main)

Identification card systems - Telecommunication applications - Integrated circuit(s) card payphone

Identification card systems - Telecommunication applications - Integrated circuit(s) card payphone

This European Standard specifies the application dependent, IC card characteristics for a payphone application. This European Standard does not define the application independent characteristics. They are defined and described in EN 726-3 and EN 726-4. This European Standard defines the operating procedures and the minimal cardphone requirements for the card related part of the payphone application.

Identifikationskartensysteme - Telekommunikationsanwendungen - Telefone mit Bezahlfunktion mittels Chipkarten

Systèmes de cartes d'identification - Applications pour les télécommunications - Publiphone à carte à circuit intégré

La présente norme européenne définit les caractéristiques propres à une application publiphone dans une carte à circuit intégré. Elle ne décrit pas les caractéristiques indépendantes des applications. Celles-ci sont définies et décrites dans l'EN 726-3 et l'EN 726-4.  La présente norme européenne définit les procédures opératoires et les exigences minimales des publiphones à cartes pour ce qui est de la partie carte de l'application publiphone.

Identification card systems - Telecommunication applications - Integrated circuit(s) card payphone

General Information

Status
Withdrawn
Publication Date
21-Nov-1995
Withdrawal Date
19-Nov-2024
ICS
35.240.15 - Identification cards. Chip cards. Biometrics
Technical Committee
CEN/TC 224 - Machine-readable cards, related device interfaces and operations
Drafting Committee
CEN/TC 224/WG 9 - Telecommunication applications
Current Stage
9060 - Closure of 2 Year Review Enquiry - Review Enquiry
Start Date
02-Dec-2023
Completion Date
02-Dec-2023
Ref Project
SIST EN 1038:1998 - Identification card systems - Telecommunication applications - Integrated circuit(s) card payphone

Buy Standard

EN 1038:1998EN 1038:1998
PreviousNext
Standard
EN 1038:1998
English language
17 pages
sale 10% off
Preview
sale 10% off
Preview
e-Library read for
1 day

Standards Content (Sample)


2003-01.Slovenski inštitut za standardizacijo. Razmnoževanje celote ali delov tega standarda ni dovoljeno.Identification card systems - Telecommunication applications - Integrated circuit(s) card payphoneIdentifikationskartensysteme - Telekommunikationsanwendungen - Telefone mit Bezahlfunktion mittels ChipkartenSystemes de cartes d'identification - Applications pour les télécommunications - Publiphone a carte a circuit intégréIdentification card systems - Telecommunication applications - Integrated circuit(s) card payphone35.240.15Identifikacijske kart
...

Questions, Comments and Discussion

Ask us and Technical Secretary will try to provide an answer. You can facilitate discussion about the standard in here.

This May Also Interest You

CEN
CEN/TS 18099:2024(Main)
Biometric data injection attack detection
kSIST-TS FprCEN/TS 18099:2024

This document provides an overview on:
-   Definitions on Biometric Data Injection Attack,
-   Biometric Data Injection Attack use case on main biometric system hardware for enrolment and verification,
-   Injection Attack Instruments on systems using one or several biometric modalities.
This document provides guidance on:
-   System for the detection of Injection Attack Instruments (defined in 3.12),
-   Appropriate mitigation risk of Injection Attack Instruments,
-   Creation of test plan for the evaluation of Injection Attack Detection system (defined in 3.9).
If presentation attacks testing is out of scope of this document, note that these two characteristics are in the scope of this document:
-   Presentation Attack Detection systems which can be used as injection attack instrument defence mechanism and/or injection attack method defence mechanism. Yet, no presentation attack testing will be performed by the laboratory to be compliant with this document (out of scope).
-   Bona Fide Presentation testing in order to test the ability of the Target Of Evaluation to correctly classify legitimate users.
The following aspects are out of scope:
-   Presentation Attack testing (as they are covered in ISO/IEC 30107 standards),
-   Biometric attacks which are not classified as Type 2 attacks (see Figure 1),
-   Evaluation of implementation of cryptographic mechanisms like secure elements,
-   Injection Attack Instruments rejected due to quality issues.

  • Draft
    38 pages
    English language
    sale 10% off
    e-Library read for
    1 day
CEN
CEN/TR 18108:2024(Main)
Personal identification - Usage of biometrics in breeder documents
kSIST-TP FprCEN/TR 18108:2024

This document provides guidance on usage of biometrics in breeder documents, in particular regarding
-   encoding of biometric reference data;
-   data quality maintenance for biometric reference data;
-   data authenticity maintenance for biometric reference data; and
-   privacy preservation of biometric reference data.
This document addresses advantages and disadvantages of biometric modes, in particular regarding
-   verification performance;
-   privacy impact;
-   feasibility of biometric acquisition considering the age of the capture subjects;
-   limits of validity and need for updating biometric reference data.
The following aspects are out of scope:
-   format and structure of breeder documents;
-   general security aspects, which are covered in CEN/TS 17489-1 [1].

  • Draft
    18 pages
    English language
    sale 10% off
    e-Library read for
    1 day
CEN
CEN/TR 18030:2023(Main)
Personal identification - Biometrics - Overview of biometric verification systems implemented across Europe
SIST-TP CEN/TR 18030:2024

This Technical Report provides an overview of the current deployment of biometric systems within Europe. It addresses the challenges that are being faced, in order to detect the current needs for improving the specifications for the implementation and deployment of biometric systems. This Technical Report considers all kind of deployments, from border control to ad-hoc services. As most of the deployed systems are based on the use of fingerprints or face recognition, this Technical Report will focus on these two biometric modalities, from the system integrator and interoperability points of view.
Identity documents, in terms of production, structure, interoperability, etc., are out of the scope of this TR. The TR is focused on the performance at system level.
The current European legislative initiatives around this topic (e.g., Entry/Exit System, framework for interoperability between EU information systems, etc.) need a robust framework study about the availability of standard technologies to improve interoperability in biometric products around the European Union.
By showing these needs, a set of recommendations for future standardization works is provided.
From a methodological perspective, the report gathers information of different entities with this classification:
- Capture/enrolment of biometrics including the quality assurance and the generation of feature or biometric models from the images.
- Best practices and guidelines to use biometrics in Europe.
- Data Quality environment using biometrics in European networks.

  • Technical report
    33 pages
    English language
    sale 10% off
    e-Library read for
    1 day
CEN
CEN/TR 17982:2023(Main)
European Digital Identity Wallets standards Gap Analysis
SIST-TP CEN/TR 17982:2024

This document identifies relevant existing standards and standards work in progress around European Digital Identity Wallets. It also identifies missing work items and overlaps in standards and is supposed to work as a roadmap for future standardization projects in the area.

  • Technical report
    39 pages
    English language
    sale 10% off
    e-Library read for
    1 day
CEN
EN ISO/IEC 2382-37:2023(Main)
Information technology - Vocabulary - Part 37: Biometrics (ISO/IEC 2382-37:2022)
SIST EN ISO/IEC 2382-37:2024

This document establishes a systematic description of the concepts in the field of biometrics pertaining to recognition of human beings. This document also reconciles variant terms in use in pre-existing International Standards on biometrics against the preferred terms, thereby clarifying the use of terms in this field.
This document does not cover concepts (represented by terms) from information technology, pattern recognition, biology, mathematics, etc. Biometrics uses such fields of knowledge as a basis.
In principle, mode-specific terms are outside of scope of this document.

  • Standard
    42 pages
    English language
    sale 10% off
    e-Library read for
    1 day
CEN
CEN/TS 17661:2021(Main)
Personal identification – European enrolment guide for biometric ID documents (EEG)
SIST-TS CEN/TS 17661:2022

This document consolidates information relating to successful and high quality biometric enrolment processes of facial and fingerprint systems, while indicating risk factors and providing appropriate mitigations. This information supports decisions regarding procurement, design, deployment and operation of these biometric systems.
This document provides guidance on:
—   capturing of facial images to be used as reference images in identity and secure documents;
—   capturing of fingerprint images to be used as reference images in identity and secure documents;
—   data quality maintenance for biometric reference data;
—   data authenticity maintenance for biometric reference data.
The document addresses the following aspects which are specific for biometric reference data capturing:
—   biometric data quality and interoperability ensurance;
—   data authenticity ensurance;
—   morphing and other presentation attack detection as well as other unauthorized changes;
—   accessibility and usability;
—   privacy and data protection;
—   optimal enrolment design.
The following aspects are out of scope:
—   IT security;
—   data capturing for verification purposes, e.g. in ABC gates;
—   capturing biometric data for enrolment in other systems different from data enrolment for integration in secure MRTD, like entry/exit systems.
This document consolidates the role of the enrolment process in a biometric system and differentiates the enrolment from the authentication, while mentioning key factors of the enrolment process that are feature independent.
Interests of the existing stakeholders are broken down and provide an insight on different views of the enrolment. In addition, organisational enrolment approaches are covered.
This document is not concerned with IT requirements or the capturing of biometric data for inspection, identification or verification purposes without the required step of creating an identity document using the captured data.

  • Technical specification
    73 pages
    English language
    sale 10% off
    e-Library read for
    1 day
CEN
CEN/TS 17631:2021(Main)
Personal identification - Biometric group access control
SIST-TS CEN/TS 17631:2021

This document provides guidance on providing access:
— to areas with physical access control, e.g. entertainment facilities, train stations, shops, libraries, banks, or border control,
— for small groups of persons, e.g. families with small children or seniors, or other accompanied persons in need of support,
— by means of biometric authentication technologies, e.g. facial, fingerprint, or vein recognition,
— in the European regulatory context.
The document addresses the following aspects, which are specific for biometric and group access:
— accessibility and usability,
— user guidance including group guidance and interaction control,
— privacy including data set content,
— presentation attack detection,
— applicable biometric technologies,
— storage of reference data,
— biometric process integration,
— specific needs considering biometrics for groups,
— biometric performance and error rates, and
— group internal linkage.
The following aspects which reflect on generic access control issues are out of scope:
— IT security,
— application specific physical security,
— policy definition,
— processes not related to biometric authentication, and
— specific performance requirements of identification (1:N) and verification (1:1) applications.

  • Technical specification
    18 pages
    English language
    sale 10% off
    e-Library read for
    1 day
CEN
CEN/TS 17489-1:2020(Main)
Personal identification - Secure and interoperable European Breeder Documents - Part 1: Framework overview
SIST-TS CEN/TS 17489-1:2020

This document provides an overview of a framework on breeder documents. It introduces the document structure of CEN/TS 17489 (all parts) that specifies how citizens retain the control of breeder document data and how they can use them to support identity proofing and verification. Moreover, the framework provides methodologies to assess and increase the level of trust in breeder documents.
This framework specifies methods for:
-   defining physical and logical/digital representations of a secure breeder document (hardware based, paper-based, server-based),
-   securing breeder document processes,
-   linking the document to its legitimate holder.
The following types of breeder documents are in the scope of the framework:
-   birth certificates,
-   marriage and partnership certificates,
-   death certificates.
The following breeder documents management processes including first-time application, later-in-life registration of an identity, and content update (e.g. name-changing) are in the scope of this framework:
-   registration,
-   issuance,
-   renewal,
-   inspection/verification,
-   revocation.
The specification of policies is out of scope.

  • Technical specification
    14 pages
    English language
    sale 10% off
    e-Library read for
    1 day
CEN
EN 1332-3:2020(Main)
Identification card systems - User Interface - Part 3: Key pads
SIST EN 1332-3:2020

This document covers the ergonomic layout and usability of keypads. The keypad consists of numeric, command and function keys and alphanumeric characters. On the basis that keypad layout impacts performance (keying speed, and errors), this document aims to:
-   enhance usability,
-   ensure ease of use through consistency,
-   increase customer confidence,
-   reduce customer error,
-   improve operating time,
-   ensure ergonomic data entry.
This document specifies the arrangement, the number and location of numeric, function and command keys, including placement of alphabetic characters on numeric keys. Design requirements and recommendations are also provided.
This document applies to all identification card systems with a numeric keypad for use by the public for stationary or non-stationary devices. This document also covers keypads on touch sensitive devices.

  • Standard
    20 pages
    English language
    sale 10% off
    e-Library read for
    1 day
CEN
CEN/TS 17261:2018(Main)
Biometric authentication for critical infrastructure access control - Requirements and Evaluation
SIST-TS CEN/TS 17261:2019

This document addresses biometric recognition systems that are used as part of an automated access control system to provide a second and independent authentication factor of the individual using the AACS to access secured areas of critical infrastructure.
This document:
-   specifies requirements for biometric recognition systems to be used as part of an AACS for critical infrastructure,
-   describes a methodology for the evaluation of biometric authentication for AACSs against the specified requirements.
The requirements and test methods address biometric authentication for AACS that: (i) operate in an internal environment constituting part of a larger site, access to which is restricted and controlled by a separate access control system; and (ii) use biometrics as a second authentication factor to a token or proximity card.
This document does not consider access by the general public, e.g. passengers in an airport, or visitors to a hospital.
Products that meet the requirements of this document will comprise (i) a biometric sensor(s) external to the secured area, which reads the biometric characteristics of the user at the point of access; and (ii) a biometric server system performing biometric enrolment, signal processing, storage of biometric references and biometric comparison within a secured area.
This document does not address AACS or AACS portals (turnstiles) but is only concerned with the biometric components which integrate with the AACS. Other standards address requirements and testing of the non-biometric parts of the AACS.

  • Technical specification
    18 pages
    English language
    sale 10% off
    e-Library read for
    1 day