SIST EN 4165-011:2008
(Main)Aerospace series - Connectors, electrical, rectangular, modular - Operating temperature 175 °C continuous - Part 011: Flange mounting receptacle 2 and 4 modules, series 2 - Product standard
Aerospace series - Connectors, electrical, rectangular, modular - Operating temperature 175 °C continuous - Part 011: Flange mounting receptacle 2 and 4 modules, series 2 - Product standard
This standard defines the flange mounting receptacle 2 and 4 modules, series 2 used in the family of rectangular electrical connectors. The plugs corresponding to those receptacles are defined in EN 4165-002.
The protective covers corresponding to those receptacles are defined in EN 4165-018.
Luft- und Raumfahrt - Elektrischer Rechtecksteckverbinder in modularer Bauweise - Betriebstemperatur 175 °C konstant - Teil 011: Feste Steckverbinder mit Montageflansch mit 2 und 4 Modulen, Serie 2 - Produktnorm
Diese Norm legt feste Steckverbinder mit Montageflansch mit 2 und 4 Modulen, Serie 2, fest, die in der Familie der elektrischen Rechtecksteckverbinder verwendet werden. Die diesen festen Steckverbindern ent¬sprechenden freien Steckverbinder sind in EN 4165 002 festgelegt.
Die zu diesen festen Steckverbindern passenden Schutzkappen sind in EN 4165 18 festgelegt.
Série aérospatiale - Connecteurs électriques modulaires - Températures d'utilisation 175°C continu - Partie 011: Embase à collerette 2 et 4 modules, série 2 - Norme de produit
Aeronavtika - Konektorji, električni, pravokotni, modularni - Stalna delovna temperatura 175 °C - 011. del: Podlaga s prirobnico z 2 ali 4 moduli, serija 2 - Standard za proizvod
General Information
Relations
Standards Content (Sample)
2003-01.Slovenski inštitut za standardizacijo. Razmnoževanje celote ali delov tega standarda ni dovoljeno.Aerospace series - Connectors, electrical, rectangular, modular - Operating temperature 175 °C continuous - Part 011: Flange mounting receptacle 2 and 4 modules, series 2 - Product standardSérie aérospatiale - Connecteurs électriques modulaires - Températures d'utilisation 175°C continu - Partie 011: Embase à collerette 2 et 4 modules, série 2 -
Norme de produitLuft- und Raumfahrt - Elektrischer Rechtecksteckverbinder in modularer Bauweise - Betriebstemperatur 175 °C konstant - Teil 011: Feste Steckverbinder mit Montageflansch mit 2 und 4 Modulen, Serie 2 - Produktnorm49.060Aerospace electric equipment and systemsICS:SIST EN 4165-011:2008enTa slovenski standard je istoveten z:EN 4165-011:200701-junij-2008SIST EN 4165-011:2008SLOVENSKI
STANDARD
EUROPEAN STANDARD NORME EUROPÉENNE EUROPÄISCHE NORM
EN 4165-011
April 2007 ICS 49.060 English Version
Aerospace series - Connectors, electrical, rectangular, modular -Operating temperature 175 °C continuous - Part 011: Flange mounting receptacle 2 and 4 modules, series 2 - Product standard
Série aérospatiale - Connecteurs électriques modulaires - Températures d'utilisation 175 °C continu - Partie 011 : Embase à collerette 2 et 4 modules, série 2 -
Norme de produit
Luft- und Raumfahrt - Elektrischer Rechtecksteckverbinder in modularer Bauweise - Betriebstemperatur 175 °C konstant - Teil 011: Feste Steckverbinder mit Montageflansch mit 2 und 4 Modulen, Serie 2 - Produktnorm This European Standard was approved by CEN on 30 September 2005.
CEN members are bound to comply with the CEN/CENELEC Internal Regulations which stipulate the conditions for giving this European Standard the status of a national standard without any alteration. Up-to-date lists and bibliographical references concerning such national standards may be obtained on application to the CEN Management Centre or to any CEN member.
This European Standard exists in three official versions (English, French, German). A version in any other language made by translation under the responsibility of a CEN member into its own language and notified to the CEN Management Centre has the same status as the official versions.
CEN members are the national standards bodies of Austria, Belgium, Bulgaria, Cyprus, Czech Republic, Denmark, Estonia, Finland, France, Germany, Greece, Hungary, Iceland, Ireland, Italy, Latvia, Lithuania, Luxembourg, Malta, Netherlands, Norway, Poland, Portugal, Romania, Slovakia, Slovenia, Spain, Sweden, Switzerland and United Kingdom.
EUROPEAN COMMITTEE FOR STANDARDIZATION
COMITÉ EUROPÉEN DE NORMALISATION EUROPÄISCHES KOMITEE FÜR NORMUNG
Management Centre: rue de Stassart, 36
B-1050 Brussels © 2007 CEN All rights of exploitation in any form and by any means reserved worldwide for CEN national Members. Ref. No. EN 4165-011:2007: E
...
Questions, Comments and Discussion
Ask us and Technical Secretary will try to provide an answer. You can facilitate discussion about the standard in here.