SIST EN 10088-3:2015
(Main)Stainless steels - Part 3: Technical delivery conditions for semi-finished products, bars, rods, wire, sections and bright products of corrosion resisting steels for general purposes
Stainless steels - Part 3: Technical delivery conditions for semi-finished products, bars, rods, wire, sections and bright products of corrosion resisting steels for general purposes
This European Standard specifies the technical delivery conditions for semi-finished products, hot or cold formed bars, rods, wire, sections and bright products of standard grades and special grades of corrosion resisting stainless steels for general purposes.
NOTE General purposes include the use of stainless steels in contact with foodstuffs.
The general technical delivery conditions specified in EN 10021 apply in addition to the specifications of this European Standard, unless otherwise specified in this European Standard.
This European Standard does not apply to components manufactured by further processing of the product forms listed above with quality characteristics altered as a result of such further processing.
Nichtrostende Stähle - Teil 3: Technische Lieferbedingungen für Halbzeug, Stäbe, Walzdraht, gezogenen Draht, Profile und Blankstahlerzeugnisse aus korrosionsbeständigen Stählen für allgemeine Verwendung
Diese Europäische Norm enthält die technischen Lieferbedingungen für Halbzeug, warm oder kalt
umgeformte Stäbe, Walzdraht, gezogenen Draht, Profile und Blankstahlerzeugnisse aus Standardgüten und
Sondergüten korrosionsbeständiger nichtrostender Stähle für allgemeine Verwendung.
ANMERKUNG Allgemeine Verwendung schließt die Verwendung von nichtrostenden Stählen in Berührung mit
Lebensmitteln ein.
Zusätzlich zu den Angaben dieser Europäischen Norm gelten, sofern in dieser Europäischen Norm nichts
anderes festgelegt ist, die in EN 10021 festgelegten allgemeinen technischen Lieferbedingungen.
Diese Europäische Norm gilt nicht für die durch Weiterverarbeitung der oben genannten Erzeugnisformen
hergestellten Teile mit fertigungsbedingt abweichenden Gütemerkmalen.
Aciers inoxydables - Partie 3: Conditions techniques de livraison pour les demi-produits, barres, fils tréfilés, profils et produits transformés à froid en acier résistant à la corrosion pour usage général
La présente norme européenne spécifie les conditions techniques de livraison des demi-produits, des barres laminées à chaud ou transformées à froid, du fil machine et des profils en nuances standardisées et en nuances spéciales d'aciers inoxydables résistant à la corrosion pour usage général.
NOTE L’usage général inclut l’utilisation des aciers inoxydables pour le contact alimentaire.
Les conditions générales techniques de livraison spécifiées dans l'EN 10021, s'appliquent en plus des spécifications de la présente Norme européenne, sauf en cas d’indication contraire dans la présente Norme européenne.
La présente Norme européenne ne s'applique pas aux composants fabriqués par transformation ultérieure des produits énumérés en 1.1, avec les modifications des caractéristiques de qualité qui en résultent.
Nerjavna jekla - 3. del: Tehnični dobavni pogoji za polizdelke, drogove, palice, žico, profile in svetle izdelke iz korozijsko odpornih jekel za splošno uporabo
Ta evropski standard določa tehnične dobavne pogoje za polizdelke, vroče ali hladno oblikovane drogove, palice, žice, profile in svetle izdelke iz korozijsko odpornih nerjavnih jekel standardnih in posebnih razredov za splošno uporabo.
OPOMBA: Splošna uporaba vključuje uporabo nerjavnih jekel v stiku z živili.
Skupaj s specifikacijami tega evropskega standarda se uporabljajo tudi splošni tehnični dobavni pogoji, ki so navedeni v standardu EN 10021, če ni drugače navedeno v tem evropskem standardu.
Ta evropski standard se ne uporablja za sestavne dele, ki so izdelani z dodatno predelavo oblik izdelkov, ki so navedeni zgoraj, pri čemer se kakovostne značilnosti posledično spremenijo zaradi dodatne predelave.
General Information
Relations
Standards Content (Sample)
2003-01.Slovenski inštitut za standardizacijo. Razmnoževanje celote ali delov tega standarda ni dovoljeno.Nichtrostende Stähle - Teil 3: Technische Lieferbedingungen für Halbzeug, Stäbe, Walzdraht, gezogenen Draht, Profile und Blankstahlerzeugnisse aus korrosionsbeständigen Stählen für allgemeine VerwendungAciers inoxydables - Partie 3: Conditions techniques de livraison pour les demi-produits, barres, fils tréfilés, profils et produits transformés à froid en acier résistant à la corrosion pour usage généralStainless steels - Part 3: Technical delivery conditions for semi-finished products, bars, rods, wire, sections and bright products of corrosion resisting steels for general purposes77.140.65Jeklene žice, jeklene vrvi in verigeSteel wire, wire ropes and link chains77.140.50SROL]GHONLFlat steel products and semi-products77.140.20Visokokakovostna jeklaStainless steelsICS:Ta slovenski standard je istoveten z:EN 10088-3:2014SIST EN 10088-3:2015en,fr,de01-januar-2015SIST EN 10088-3:2015SLOVENSKI
STANDARDSIST EN 10088-3:20051DGRPHãþD
SIST EN 10088-3:2015
EUROPEAN STANDARD NORME EUROPÉENNE EUROPÄISCHE NORM
EN 10088-3
October 2014 ICS 77.140.20; 77.140.50; 77.140.65 Supersedes EN 10088-3:2005English Version
Stainless steels - Part 3: Technical delivery conditions for semi-finished products, bars, rods, wire, sections and bright products of corrosion resisting steels for general purposes
Aciers inoxydables - Partie 3: Conditions techniques de livraison pour les demi-produits, barres, fils tréfilés, profils etproduits transformés à froid en acier résistant à la corrosion pour usage général
Nichtrostende Stähle - Teil 3: Technische Lieferbedingungen für Halbzeug, Stäbe, Walzdraht, gezogenen Draht, Profile und Blankstahlerzeugnisse aus korrosionsbeständigen Stählen für allgemeine VerwendungThis European Standard was approved by CEN on 9 August 2014.
CEN members are bound to comply with the CEN/CENELEC Internal Regulations which stipulate the conditions for giving this European Standard the status of a national standard without any alteration. Up-to-date lists and bibliographical references concerning such national standards may be obtained on application to the CEN-CENELEC Management Centre or to any CEN member.
This European Standard exists in three official versions (English, French, German). A version in any other language made by translation under the responsibility of a CEN member into its own language and notified to the CEN-CENELEC Management Centre has the same status as the official versions.
CEN members are the national standards bodies of Austria, Belgium, Bulgaria, Croatia, Cyprus, Czech Republic, Denmark, Estonia, Finland, Former Yugoslav Republic of Macedonia, France, Germany, Greece, Hungary, Iceland, Ireland, Italy, Latvia, Lithuania, Luxembourg, Malta, Netherlands, Norway, Poland, Portugal, Romania, Slovakia, Slovenia, Spain, Sweden, Switzerland, Turkey and United Kingdom.
EUROPEAN COMMITTEE FOR STANDARDIZATION
COMITÉ EUROPÉEN DE NORMALISATION EUROPÄISCHES KOMITEE FÜR NORMUNG
CEN-CENELEC Management Centre:
Avenue Marnix 17,
B-1000 Brussels © 2014 CEN All rights of exploitation in any form and by any means reserved worldwide for CEN national Members. Ref. No. EN 10088-3:2014 ESIST EN 10088-3:2015
EN 10088-3:2014 (E) 2 Contents Page Foreword .3 Introduction .4 1 Scope .5 2 Normative references .5 3 Terms and definitions .6 4 Designation and ordering .6 4.1 Designation of steel grades .6 4.2 Designation to be used on ordering .6 5 Classification of grades .7 6 Requirements .8 6.1 Steelmaking process .8 6.2 Del
...
SLOVENSKI STANDARD
oSIST prEN 10088-3:2012
25-april-2012
1HUMDYQDMHNODGHO 7HKQLþQLGREDYQLSRJRML]DSROL]GHONHGURJRYHSDOLFHåLFR
SURILOHLQVYHWOHL]GHONHL]NRUR]LMVNRRGSRUQLKMHNHO]DVSORãQRXSRUDER
Stainless steels - Part 3: Technical delivery conditions for semi-finished products, bars,
rods, wire, sections and bright products of corrosion resisting steels for general purposes
Nichtrostende Stähle - Teil 3: Technische Lieferbedingungen für Halbzeug, Stäbe,
Walzdraht, gezogenen Draht, Profile und Blankstahlerzeugnisse aus
korrosionsbeständigen Stählen für allgemeine Verwendung
Aciers inoxydables - Partie 3: Conditions techniques de livraison pour les demi-produits,
barres, fils tréfilés, profils et produits transformés à froid en acier résistant à la corrosion
pour usage général
Ta slovenski standard je istoveten z: prEN 10088-3
ICS:
77.140.20 Visokokakovostna jekla Stainless steels
77.140.50 3ORãþDWLMHNOHQLL]GHONLLQ Flat steel products and semi-
SROL]GHONL products
77.140.65 Jeklene žice, jeklene vrvi in Steel wire, wire ropes and
verige link chains
oSIST prEN 10088-3:2012 en,fr,de
2003-01.Slovenski inštitut za standardizacijo. Razmnoževanje celote ali delov tega standarda ni dovoljeno.
---------------------- Page: 1 ----------------------
oSIST prEN 10088-3:2012
---------------------- Page: 2 ----------------------
oSIST prEN 10088-3:2012
EUROPEAN STANDARD
DRAFT
prEN 10088-3
NORME EUROPÉENNE
EUROPÄISCHE NORM
December 2011
ICS 77.140.20; 77.140.50; 77.140.65 Will supersede EN 10088-3:2005
English Version
Stainless steels - Part 3: Technical delivery conditions for semi-
finished products, bars, rods, wire, sections and bright products
of corrosion resisting steels for general purposes
Aciers inoxydables - Partie 3: Conditions techniques de Nichtrostende Stähle - Teil 3: Technische
livraison pour les demi-produits, barres, fils tréfilés, profils Lieferbedingungen für Halbzeug, Stäbe, Walzdraht,
et produits transformés à froid en acier résistant à la gezogenen Draht, Profile und Blankstahlerzeugnisse aus
corrosion pour usage général korrosionsbeständigen Stählen für allgemeine Verwendung
This draft European Standard is submitted to CEN members for enquiry. It has been drawn up by the Technical Committee ECISS/TC 105.
If this draft becomes a European Standard, CEN members are bound to comply with the CEN/CENELEC Internal Regulations which
stipulate the conditions for giving this European Standard the status of a national standard without any alteration.
This draft European Standard was established by CEN in three official versions (English, French, German). A version in any other language
made by translation under the responsibility of a CEN member into its own language and notified to the CEN-CENELEC Management
Centre has the same status as the official versions.
CEN members are the national standards bodies of Austria, Belgium, Bulgaria, Croatia, Cyprus, Czech Republic, Denmark, Estonia,
Finland, France, Germany, Greece, Hungary, Iceland, Ireland, Italy, Latvia, Lithuania, Luxembourg, Malta, Netherlands, Norway, Poland,
Portugal, Romania, Slovakia, Slovenia, Spain, Sweden, Switzerland and United Kingdom.
Recipients of this draft are invited to submit, with their comments, notification of any relevant patent rights of which they are aware and to
provide supporting documentation.
Warning : This document is not a European Standard. It is distributed for review and comments. It is subject to change without notice and
shall not be referred to as a European Standard.
EUROPEAN COMMITTEE FOR STANDARDIZATION
COMITÉ EUROPÉEN DE NORMALISATION
EUROPÄISCHES KOMITEE FÜR NORMUNG
Management Centre: Avenue Marnix 17, B-1000 Brussels
© 2011 CEN All rights of exploitation in any form and by any means reserved Ref. No. prEN 10088-3:2011: E
worldwide for CEN national Members.
---------------------- Page: 3 ----------------------
oSIST prEN 10088-3:2012
prEN 10088-3:2011 (E)
Contents Page
Foreword .3
1 Scope .5
2 Normative references .5
3 Terms and definitions .6
4 Designation and ordering .6
4.1 Designation of steel grades .6
4.2 Designation to
...
Questions, Comments and Discussion
Ask us and Technical Secretary will try to provide an answer. You can facilitate discussion about the standard in here.