SIST EN ISO 19116:2020/A1:2021
(Amendment)Geographic information - Positioning services - Amendment 1 (ISO 19116:2019/Amd 1:2021)
Geographic information - Positioning services - Amendment 1 (ISO 19116:2019/Amd 1:2021)
Geoinformation - Positionierung - Änderung 1 (ISO 19116:2019/Amd 1:2021)
Information géographique - Services de positionnement - Amendement 1 (ISO 19116:2019/Amd 1:2021)
Geografske informacije - Lokacijske storitve - Dopolnilo 1 (ISO 19116:2019/Amd 1:2021)
General Information
Relations
Standards Content (Sample)
SLOVENSKI STANDARD
SIST EN ISO 19116:2020/A1:2021
01-oktober-2021
Geografske informacije - Lokacijske storitve - Dopolnilo 1 (ISO 19116:2019/Amd
1:2021)
Geographic information - Positioning services - Amendment 1 (ISO 19116:2019/Amd
1:2021)
Geoinformation - Positionierung - Änderung 1 (ISO 19116:2019/Amd 1:2021)
Information géographique - Services de positionnement - Amendement 1 (ISO
19116:2019/Amd 1:2021)
Ta slovenski standard je istoveten z: EN ISO 19116:2019/A1:2021
ICS:
07.040 Astronomija. Geodezija. Astronomy. Geodesy.
Geografija Geography
35.240.70 Uporabniške rešitve IT v IT applications in science
znanosti
SIST EN ISO 19116:2020/A1:2021 en,fr,de
2003-01.Slovenski inštitut za standardizacijo. Razmnoževanje celote ali delov tega standarda ni dovoljeno.
---------------------- Page: 1 ----------------------
SIST EN ISO 19116:2020/A1:2021
---------------------- Page: 2 ----------------------
SIST EN ISO 19116:2020/A1:2021
EN ISO 19116:2019/A1
EUROPEAN STANDARD
NORME EUROPÉENNE
June 2021
EUROPÄISCHE NORM
ICS 35.240.70
English Version
Geographic information - Positioning services -
Amendment 1 (ISO 19116:2019/Amd 1:2021)
Information géographique - Services de Geoinformation - Positionierung - Änderung 1 (ISO
positionnement - Amendement 1 (ISO 19116:2019/Amd 1:2021)
19116:2019/Amd 1:2021)
This amendment A1 modifies the European Standard EN ISO 19116:2019; it was approved by CEN on 13 April 2021.
CEN members are bound to comply with the CEN/CENELEC Internal Regulations which stipulate the conditions for inclusion of
this amendment into the relevant national standard without any alteration. Up-to-date lists and bibliographical references
concerning such national standards may be obtained on application to the CEN-CENELEC Management Centre or to any CEN
member.
This amendment exists in three official versions (English, French, German). A version in any other language made by translation
under the responsibility of a CEN member into its own language and notified to the CEN-CENELEC Management Centre has the
same status as the official versions.
CEN members are the national standards bodies of Austria, Belgium, Bulgaria, Croatia, Cyprus, Czech Republic, Denmark, Estonia,
Finland, France, Germany, Greece, Hungary, Iceland, Ireland, Italy, Latvia, Lithuania, Luxembourg, Malta, Netherlands, Norway,
Poland, Portugal, Republic of North Macedonia, Romania, Serbia, Slovakia, Slovenia, Spain, Sweden, Switzerland, Turkey and
United Kingdom.
EUROPEAN COMMITTEE FOR STANDARDIZATION
COMITÉ EUROPÉEN DE NORMALISATION
EUROPÄISCHES KOMITEE FÜR NORMUNG
CEN-CENELEC Management Centre: Rue de la Science 23, B-1040 Brussels
© 2021 CEN All rights of exploitation in any form and by any means reserved Ref. No. EN ISO 19116:2019/A1:2021 E
worldwide for CEN national Members.
---------------------- Page: 3 ----------------------
SIST EN ISO 19116:2020/A1:2021
EN ISO 19116:2019/A1:2021 (E)
Contents Page
European foreword . 3
2
---------------------- Page: 4 ----------------------
SIST EN ISO 19116:2020/A1:2021
EN ISO 19116:2019/A1:2021 (E)
European foreword
This document (EN ISO 19116:2019/A1:2021) has been prepared by Technical Committee ISO/TC 211
"Geographic information/Geomatics" in collaboration with Technical Committee CEN/TC 287
“Geographic Information” the secretariat of which is held by BSI.
This European Standard shall be given the status of a national standard, either by publication of an
identical text or by endorsement, at the latest by December 2021, and conflicting national standards
shall be withdrawn at the latest by December 2021.
Attention is drawn to the possibility that some of the elements of this document may be the subject of
patent rights. CEN shall not be held responsible for identifying any or all such patent rights.
According to the CEN-CENELEC Internal Regulations, the national standards organizations of the
following countries are bound to implement this European Standard: Austria, Belgium, Bulgaria,
Croatia, Cyprus, Czech Republic, Denmark, Estonia, Finland, France, Germany, Greece, Hungary, Iceland,
Ireland, Italy, Latvia, Lithuania, Luxembourg, Malta, Netherlands, Norway, Poland, Portugal, Republic of
North Macedonia, Romania, Serbia, Slovakia, Slovenia, Spain, Sweden, Switzerland, Turkey and the
United Kingdom.
Endorsement notice
The text of ISO 19116:2019/Amd 1:2021 has been app
...
SLOVENSKI STANDARD
SIST EN ISO 19116:2020/oprA1:2021
01-januar-2021
Geografske informacije - Lokacijske storitve - Dopolnilo 1 (ISO/DAM 19116:2020)
Geographic information - Positioning services - Amendment 1 (ISO/DAM 19116:2020)
Geoinformation - Positionierung - Änderung 1 (ISO/DAM 19116:2020)
Information géographique - Services de positionnement - Amendement 1 (ISO/DAM
19116:2020)
Ta slovenski standard je istoveten z: EN ISO 19116:2019/prA1
ICS:
07.040 Astronomija. Geodezija. Astronomy. Geodesy.
Geografija Geography
35.240.70 Uporabniške rešitve IT v IT applications in science
znanosti
SIST EN ISO 19116:2020/oprA1:2021 en,fr,de
2003-01.Slovenski inštitut za standardizacijo. Razmnoževanje celote ali delov tega standarda ni dovoljeno.
---------------------- Page: 1 ----------------------
SIST EN ISO 19116:2020/oprA1:2021
---------------------- Page: 2 ----------------------
SIST EN ISO 19116:2020/oprA1:2021
DRAFT AMENDMENT
ISO 19116:2019/DAM 1
ISO/TC 211 Secretariat: SIS
Voting begins on: Voting terminates on:
2020-11-13 2021-02-05
Geographic information — Positioning services
AMENDMENT 1
Information géographique — Services de positionnement
AMENDEMENT 1
ICS: 35.240.70
THIS DOCUMENT IS A DRAFT CIRCULATED
This document is circulated as received from the committee secretariat.
FOR COMMENT AND APPROVAL. IT IS
THEREFORE SUBJECT TO CHANGE AND MAY
NOT BE REFERRED TO AS AN INTERNATIONAL
STANDARD UNTIL PUBLISHED AS SUCH.
IN ADDITION TO THEIR EVALUATION AS
ISO/CEN PARALLEL PROCESSING
BEING ACCEPTABLE FOR INDUSTRIAL,
TECHNOLOGICAL, COMMERCIAL AND
USER PURPOSES, DRAFT INTERNATIONAL
STANDARDS MAY ON OCCASION HAVE TO
BE CONSIDERED IN THE LIGHT OF THEIR
POTENTIAL TO BECOME STANDARDS TO
WHICH REFERENCE MAY BE MADE IN
Reference number
NATIONAL REGULATIONS.
ISO 19116:2019/DAM 1:2020(E)
RECIPIENTS OF THIS DRAFT ARE INVITED
TO SUBMIT, WITH THEIR COMMENTS,
NOTIFICATION OF ANY RELEVANT PATENT
RIGHTS OF WHICH THEY ARE AWARE AND TO
©
PROVIDE SUPPORTING DOCUMENTATION. ISO 2020
---------------------- Page: 3 ----------------------
SIST EN ISO 19116:2020/oprA1:2021
ISO 19116:2019/DAM 1:2020(E)
COPYRIGHT PROTECTED DOCUMENT
© ISO 2020
All rights reserved. Unless otherwise specified, or required in the context of its implementation, no part of this publication may
be reproduced or utilized otherwise in any form or by any means, electronic or mechanical, including photocopying, or posting
on the internet or an intranet, without prior written permission. Permission can be requested from either ISO at the address
below or ISO’s member body in the country of the requester.
ISO copyright office
CP 401 • Ch. de Blandonnet 8
CH-1214 Vernier, Geneva
Phone: +41 22 749 01 11
Email: copyright@iso.org
Website: www.iso.org
Published in Switzerland
ii © ISO 2020 – All rights reserved
---------------------- Page: 4 ----------------------
SIST EN ISO 19116:2020/oprA1:2021
ISO 19116:2019/DAM 1:2020(E)
Foreword
ISO (the International Organization for Standardization) is a worldwide federation of national standards
bodies (ISO member bodies). The work of preparing International Standards is normally carried out
through ISO technical committees. Each member body interested in a subject for which a technical
committee has been established has the right to be represented on that committe
...
Questions, Comments and Discussion
Ask us and Technical Secretary will try to provide an answer. You can facilitate discussion about the standard in here.