SIST EN 6035:2016

SLOVENSKI STANDARD
SIST EN 6035:2016
01-februar-2016
$HURQDYWLND=YODNQLRMDþHQLSROLPHUQLPDWHULDOL3UHVNXVQDPHWRGD
8JRWDYOMDQMHQDWH]QHWUGQRVWLUH]DQLKLQQHUH]DQLKY]RUFHY
Aerospace series - Fibre reinforced plastics - Test method - Determination of notched
and unnotched tensile strength
Luft- und Raumfahrt - Faserverstärkte Kunststoffe - Prüfverfahren - Bestimmung der
Kerbzugfestigkeit an gekerbten und ungekerbten Probekörpern
Série aérospatiale - Matières plastiques renforcées de fibres - Méthode d'essai -
Détermination de la résistance en traction lisse et en traction trouée
Ta slovenski standard je istoveten z: EN 6035:2015
ICS:
49.025.40 Guma in polimerni materiali Rubber and plastics
83.120 2MDþDQLSROLPHUL Reinforced plastics
SIST EN 6035:2016 en,fr,de
2003-01.Slovenski inštitut za standardizacijo. Razmnoževanje celote ali delov tega standarda ni dovoljeno.

---------------------- Page: 1 ----------------------

SIST EN 6035:2016

---------------------- Page: 2 ----------------------

SIST EN 6035:2016


EN 6035
EUROPEAN STANDARD

NORME EUROPÉENNE

November 2015
EUROPÄISCHE NORM
ICS 49.025.40
English Version

Aerospace series - Fibre reinforced plastics - Test method -
Determination of notched and unnotched tensile strength
Série aérospatiale - Matières plastiques renforcées de Luft- und Raumfahrt - Faserverstärkte Kunststoffe -
fibres - Méthode d'essai - Détermination de la Prüfverfahren - Bestimmung der Kerbzugfestigkeit an
résistance en traction lisse et en traction trouée gekerbten und ungekerbten Probekörpern
This European Standard was approved by CEN on 10 August 2013.

CEN members are bound to comply with the CEN/CENELEC Internal Regulations which stipulate the conditions for giving this
European Standard the status of a national standard without any alteration. Up-to-date lists and bibliographical references
concerning such national standards may be obtained on application to the CEN-CENELEC Management Centre or to any CEN
member.

This European Standard exists in three official versions (English, French, German). A version in any other language made by
translation under the responsibility of a CEN member into its own language and notified to the CEN-CENELEC Management
Centre has the same status as the official versions.

CEN members are the national standards bodies of Austria, Belgium, Bulgaria, Croatia, Cyprus, Czech Republic, Denmark, Estonia,
Finland, Former Yugoslav Republic of Macedonia, France, Germany, Greece, Hungary, Iceland, Ireland, Italy, Latvia, Lithuania,
Luxembourg, Malta, Netherlands, Norway, Poland, Portugal, Romania, Slovakia, Slovenia, Spain, Sweden, Switzerland, Turkey and
United Kingdom.





EUROPEAN COMMITTEE FOR STANDARDIZATION
COMITÉ EUROPÉEN DE NORMALISATION

EUROPÄISCHES KOMITEE FÜR NORMUNG

CEN-CENELEC Management Centre: Avenue Marnix 17, B-1000 Brussels
© 2015 CEN All rights of exploitation in any form and by any means reserved Ref. No. EN 6035:2015 E
worldwide for CEN national Members.

---------------------- Page: 3 ----------------------

SIST EN 6035:2016
EN 6035:2015 (E)
Contents Page
European foreword . 3
1 Scope . 4
2 Normative references . 4
3 Terms and definitions . 4
4 Principle of the method . 5
5 Designation of the method . 5
6 Apparatus . 5
7 Test specimen . 5
8 Procedure. 6
9 Presentation of the results . 7
10 Test report . 8
2

---------------------- Page: 4 ----------------------

SIST EN 6035:2016
EN 6035:2015 (E)
European foreword
This document (EN 6035:2015) has been prepared by the Aerospace and Defence Industries
Association of Europe - Standardization (ASD-STAN).
After enquiries and votes carried out in accordance with the rules of this Association, this Standard has
received the approval of the National Associations and the Official Services of the member countries of
ASD, prior to its presentation to CEN.
This European Standard shall be given the status of a national standard, either by publication of an
identical text or by endorsement, at the latest by May 2016, and conflicting national standards shall be
withdrawn at the latest by May 2016.
Attention is drawn to the possibility that some of the elements of this document may be the subject of
patent rights. CEN [and/or CENELEC] shall not be held responsible for identifying any or all such patent
rights.
According to the CEN-CENELEC Internal Regulations, the national standards organizations of the
following countries are bound to implement this European Standard: Austria, Belgium, Bulgaria,
Croatia, Cyprus, Czech Republic, Denmark, Estonia, Finland, Former Yugoslav Republic of Macedonia,
France, Germany, Greece, Hungary, Iceland, Ireland, Italy, Latvia, Lithuania, Luxembourg, Malta,
Netherlands, Norway, Poland, Portugal, Romania, Slovakia, Slovenia, Spain, Sweden, Switzerland,
Turkey and the United Kingdom.
3

---------------------- Page: 5 ----------------------

SIST EN 6035:2016
EN 6035:2015 (E)
1 Scope
This standard defines a method to be used to determine the tensile strength of notched and unnotched
fibre reinforced plastics.
It is applicable to composite laminates with unidirectional plies or woven fabrics reinforcement.
This standard does not give any direction necessary to meet health and safety requirements. It is the
responsibility of the user of this standard to consult and establish appropriate health and safety
precautions.
2 Normative references
The following documents, in whole or in part, are normatively referenced in this document and are
indispensable for its application. For dated references, only the edition cited applies. For undated
references, the latest edition of the referenced document (including any amendments) applies.
EN 2374, Aerospace series — Glass fibre reinforced mouldings and sandwich composites — Production of
test panels
EN 2489, Aerospace series — Fibre reinforced plastics — Determination of the action of test fluids
1)
EN 2565, Aerospace series — Preparation of carbon fibre reinforced resin panels for test purposes
EN 2743, Aerospace series — Fibre reinforced plastics — Standard procedures for conditioning prior to
testing unaged materials
EN 2823, Aerospace series — Fibre reinforced plastics — Determination of the effect of exposure to humid
1)
atmosphere on physical and mechanical characteristics
3 Terms and definitions
For the purposes of this document, the following terms and definitions apply.
3.1
unnotched tensile strength
maximum tensile load experienced by the unnotched test specimen divided by the initial cross sectional
area within the gauge length
3.2
notched tensile strength
maximum tensile load experienced by the notched test specimen divided by the initial gross cross
sectional area within the gauge length
3.3
K
T
unnotched tensile strength divided by the notched tensile strength

1) Published as ASD-STAN Prestandard at the date of publicatio
...