SIST EN 45510-5-2:2000
(Main)Guides for procurement of power station equipment -- Part 5-2: Gas turbines
Guides for procurement of power station equipment -- Part 5-2: Gas turbines
This standard gives guidance on writing the technical specification for the procurement of gas turbines, including gas turbines for combined-cycle systems, and their auxiliairies for use in electricity generating stations (power stations). This Guide for procurement is not applicable to equipment for use in the nuclear reactor plant area of nuclear pouwer stations. Other possible applications of such equipment have not been considered in the preparation of this guide.
Leitfaden für die Beschaffung von Ausrüstungen für Kraftwerke -- Teil 5-2: Gasturbinen
Die vorliegende Norm ist eine Anleitung zur Erstellung der technischen Spezifikation für die Beschaffung von Gasturbinen, einschließlich Gasturbinen für Systeme mit kombiniertem Prozeß und ihrer Hilfseinrichtungen für den Einsatz in Anlagen zur Erzeugung von elektrischer Energie (Kraftwerke). Dieser Leitfaden ist nicht anwendbar auf Ausrüstung zur Verwendung im Nuklearbereich von Kernkraftwerken. Bei der Erstellung des Leitfadens wurden keine weiteren Möglichkeiten zur Anwendung der beschriebenen Ausrüstung in Betracht gezogen.
Guides pour l'acquisition d'équipements destinés aux centrales de production d'électricité -- Partie 5-2: Turbines à combustion
La présente norme donne des recommandations pour la rédaction de spécification technique nécessaire à l'acquisition de turbines à combustion et de leurs auxiliaires, y compris les turbines à combustion équipant les installations à cycle combiné, pour les centrales de production d'électricité. Ce guide d'achat n'est pas applicable à ce type d'équipement lorsque celui-ci est destiné à l'îlot nucléaire des centrales nucléaires. D'autres applications possibles de ce type d'équipement n'ont pas été prises en considération dans la préparation de ce guide.
Guide for procurement of power station equipment - Part 5-2: Gas turbines
General Information
- Status
- Published
- Publication Date
- 31-May-2000
- Technical Committee
- EPT - Steam turbines
- Current Stage
- 6060 - National Implementation/Publication (Adopted Project)
- Start Date
- 01-Jun-2000
- Due Date
- 01-Jun-2000
- Completion Date
- 01-Jun-2000
Overview
EN 45510-5-2:1998 (CLC) is a European guide for the procurement of power station equipment, specifically focused on gas turbines. The standard gives guidance on how to write the technical specification for procuring gas turbines - including units for combined‑cycle systems - and their auxiliaries for use in electricity generating stations. It is intended for conventional power station applications and is explicitly not applicable to equipment for the nuclear reactor plant area of nuclear power stations.
Key topics
The guide concentrates on structuring and documenting procurement requirements for gas turbine packages. Key technical topics and requirements typically addressed in a procurement guide of this type include:
- Scope and performance requirements: defining duty points, load profiles and expected efficiency for single-shaft and combined‑cycle installations
- Auxiliary systems and interfaces: electrical, lube-oil, fuel supply, air intake, exhaust and control-system interfaces
- Technical specification content: mandatory vs. optional clauses, vendor data, drawings and design limits
- Quality, testing and inspection: factory tests, site tests, witness testing and acceptance criteria
- Documentation and warranties: required delivery documentation, spare parts lists, maintenance manuals and guarantee periods
- Delivery, installation and commissioning: transport, site acceptance tests and handover requirements
- Health, safety and environmental considerations: emissions, noise and safety interfaces
(These topic headings reflect the typical content of a procurement guide and align with the standard’s objective to assist spec writers in preparing comprehensive technical specifications.)
Applications
Who uses EN 45510-5-2:1998:
- Procurement engineers and spec writers at utilities and independent power producers preparing tender documents for gas turbine packages
- EPC contractors and project managers defining contractual technical requirements for combined‑cycle plants
- OEMs and suppliers responding to tenders who need to align proposals with buyer expectations
- Consultants and plant operators developing performance guarantees, acceptance tests and O&M planning
Practical uses:
- Creating clear, unambiguous technical specifications to reduce bid variability
- Ensuring compatibility of turbine packages and auxiliaries with plant systems
- Streamlining acceptance testing and commissioning procedures
Related standards
- EN 45510 series (other parts covering procurement of power station equipment)
- National adoptions (e.g., SIST EN 45510-5-2:2000)
- ICS class references: 27.100 (Power stations in general) and 27.040 (Gas and steam turbines)
Keywords: EN 45510-5-2:1998, gas turbines, procurement, power station equipment, combined-cycle, technical specification, auxiliaries, electricity generating stations.
Frequently Asked Questions
SIST EN 45510-5-2:2000 is a standard published by the Slovenian Institute for Standardization (SIST). Its full title is "Guides for procurement of power station equipment -- Part 5-2: Gas turbines". This standard covers: This standard gives guidance on writing the technical specification for the procurement of gas turbines, including gas turbines for combined-cycle systems, and their auxiliairies for use in electricity generating stations (power stations). This Guide for procurement is not applicable to equipment for use in the nuclear reactor plant area of nuclear pouwer stations. Other possible applications of such equipment have not been considered in the preparation of this guide.
This standard gives guidance on writing the technical specification for the procurement of gas turbines, including gas turbines for combined-cycle systems, and their auxiliairies for use in electricity generating stations (power stations). This Guide for procurement is not applicable to equipment for use in the nuclear reactor plant area of nuclear pouwer stations. Other possible applications of such equipment have not been considered in the preparation of this guide.
SIST EN 45510-5-2:2000 is classified under the following ICS (International Classification for Standards) categories: 27.040 - Gas and steam turbines. Steam engines; 27.100 - Power stations in general. The ICS classification helps identify the subject area and facilitates finding related standards.
SIST EN 45510-5-2:2000 is associated with the following European legislation: EU Directives/Regulations: 93/38/EEC; Standardization Mandates: M/BC/CEN/92/10. When a standard is cited in the Official Journal of the European Union, products manufactured in conformity with it benefit from a presumption of conformity with the essential requirements of the corresponding EU directive or regulation.
SIST EN 45510-5-2:2000 is available in PDF format for immediate download after purchase. The document can be added to your cart and obtained through the secure checkout process. Digital delivery ensures instant access to the complete standard document.
Standards Content (Sample)
2003-01.Slovenski inštitut za standardizacijo. Razmnoževanje celote ali delov tega standarda ni dovoljeno.Guide for procurement of power station equipment - Part 5-2: Gas turbinesLeitfaden für die Beschaffung von Ausrüstungen für Kraftwerke -- Teil 5-2: GasturbinenGuides pour l'acquisition d'équipements destinés aux centrales de production d'électricité -- Partie 5-2: Turbines à combustionGuides for procurement of power station equipment -- Part 5-2: Gas turbines27.100Elektrarne na splošnoPower stations in general27.040Plinske in parne turbine. Parni strojiGas and steam turbines. Steam enginesICS:Ta slovenski standard je istoveten z:EN 45510-5-2:1998SIST EN 45510-5-2:2000en01-junij-2000SIST EN 45510-5-2:2000SLOVENSKI
STANDARD
SIST
...
Questions, Comments and Discussion
Ask us and Technical Secretary will try to provide an answer. You can facilitate discussion about the standard in here.
Loading comments...