SIST EN 2833-005:2014

2003-01.Slovenski inštitut za standardizacijo. Razmnoževanje celote ali delov tega standarda ni dovoljeno.VPROHLuft- und Raumfahrt - Warmhärtbare Glasfaser - Prepregs - Technische Lieferbedingungen - Teil 005: Gewebe - Prepregs aus Glasfaser und PhenolharzSérie aérospatiale - Préimprégnés de verre textile/résine thermodurcissable
- Spécification technique - Partie 005 : Verre textile/résine phénolique préimprégnésAerospace series - Glass fibre thermosetting preimpregnates - Technical specification - Part 005: Glass fabric/phenolic resin preimpregnate49.025.99Drugi materialiOther materialsICS:Ta slovenski standard je istoveten z:EN 2833-005:2013SIST EN 2833-005:2014en01-marec-2014SIST EN 2833-005:2014SLOVENSKI
STANDARD



SIST EN 2833-005:2014



EUROPEAN STANDARD NORME EUROPÉENNE EUROPÄISCHE NORM
EN 2833-005
August 2013 ICS 49.025.40 English Version
Aerospace series - Glass fibre thermosetting preimpregnates - Technical specification - Part 005: Glass fabric/phenolic resin preimpregnate
Série aérospatiale - Préimprégnés de verre textile/résine thermodurcissable
- Spécification technique - Partie 005 : Verre textile/résine phénolique préimprégnés
Luft- und Raumfahrt - Warmhärtbare Glasfaser - Prepregs -Technische Lieferbedingungen - Teil 005: Gewebe - Prepregs aus Glasfaser und Phenolharz This European Standard was approved by CEN on 8 May 2013.
CEN members are bound to comply with the CEN/CENELEC Internal Regulations which stipulate the conditions for giving this European Standard the status of a national standard without any alteration. Up-to-date lists and bibliographical references concerning such national standards may be obtained on application to the CEN-CENELEC Management Centre or to any CEN member.
This European Standard exists in three official versions (English, French, German). A version in any other language made by translation under the responsibility of a CEN member into its own language and notified to the CEN-CENELEC Management Centre has the same status as the official versions.
CEN members are the national standards bodies of Austria, Belgium, Bulgaria, Croatia, Cyprus, Czech Republic, Denmark, Estonia, Finland, Former Yugoslav Republic of Macedonia, France, Germany, Greece, Hungary, Iceland, Ireland, Italy, Latvia, Lithuania, Luxembourg, Malta, Netherlands, Norway, Poland, Portugal, Romania, Slovakia, Slovenia, Spain, Sweden, Switzerland, Turkey and United Kingdom.
EUROPEAN COMMITTEE FOR STANDARDIZATION
COMITÉ EUROPÉEN DE NORMALISATION EUROPÄISCHES KOMITEE FÜR NORMUNG
Management Centre:
Avenue Marnix 17,
B-1000 Brussels © 2013 CEN All rights of exploitation in any form and by any means reserved worldwide for CEN national Members. Ref. No. EN 2833-005:2013: ESIST EN 2833-005:2014



EN 2833-005:2013 (E) 2 Contents Page Foreword . 3 1 Scope . 4 2 Normative references . 4 3 Definitions, abbreviations . 5 4 Material description . 5 5 Testing . 6 5.1 Screening. 6 5.2 Qualification . 6 5.3 Batch release . 6
SIST EN 2833-005:2014



EN 2833-005:2013 (E) 3 Foreword This document (EN 2833-005:2013) has been prepared by the Aerospace and Defence Industries Association of Europe - Standardization (ASD-STAN). After enquiries and votes carried out in accordance with the rules of this Association, this Standard has received the approval of the National Associations and the Official Services of the member countries of ASD, prior to its presentation to CEN. This European Standard shall be given the status of a national standard, either by publication of an identical text or by endorsement, at the latest by February 2014, and conflicting national standards shall be withdrawn at the latest by February 2014. Attention is drawn to the possibility that some of the elements of this document may be the subject of patent rights. CEN [and/or CENELEC] shall not be held responsible for identifying any or all such patent rights. According to the CEN-CENELEC Internal Regulations, the national standards organizations of the following countries are bound to implement this European Standard: Austria, Belgium, Bulgaria, Croatia, Cyprus, Czech Republic, Denmark, Estonia, Finland, Former Yugoslav Republic of Macedonia, France, Germany, Greece, Hungary, Iceland, Ireland, Italy, Latvia, Lithuania, Luxembourg, Malta, Netherlands, Norway, Poland, Portugal, Romania, Slovakia, Slovenia, Spain, Sweden, Switzerland, Turkey and the United Kingdom. SIST EN 2833-005:2014



EN 2833-005:2013 (E) 4 1 Scope This standard specifies the requirements for glass fabric/phenolic resin preimpregnates. It shall be used together with EN 2833-1. 2 Normative references The following documents, in whole or in part, are normatively referenced in this document and are indispensable for its application. For dated references, only the edition cited applies. For undated references, the latest edition of the referenced document (including any amendments) applies. EN 2155-12 Aerospace series — Test methods for transparent materials for aircraft glazing — Part 12: Determination of linear thermal expansion EN 2377
Aerospace series — Glass fibre reinforced plastics — Test method — Determination of apparent interlaminar shear strength EN 2379
Aerospace series — Fluids for assessment of non-metallic materials
EN 2489
Aerospace series — Fibre reinforced plastics — Determination of the action of test fluids
EN 2743
Aerospace series — Fibre reinforced plastics — Standard procedures for conditioning prior to testing unaged materials EN 2824
Aerospace series — Burning behaviour of non-metallic materials under the influence of radiating heat and flames — Determination of smoke density and gas components in the smoke of materials — Test equipment, apparatus and media
EN 2825
Aerospace series — Burning behaviour of non-metallic materials under the influence of radiating heat and flames — Determination of smoke density
EN 2826
Aerospace series — Burning behaviour of non-metallic materials under the influence of radiating heat and flames — Determination of gas components in the smoke EN 3783
Aerospace series — Fibre composite materials — Normalization of fibre dominated mechanical properties
EN 3844-1 Aerospace series —
...