SIST EN 50065-2-1:2004/A1:2006

SLOVENSKI SIST EN 50065-2-
1:2004/A1:2006

STANDARD
januar 2006
6LJQDOL]DFLMDSRQL]NRQDSHWRVWQLKHOHNWULþQLKQDSHOMDYDKYIUHNYHQþQHP
REPRþMXRGN+]GRN+]±GHO=DKWHYH]DRGSRUQRVWRPUHåQH
NRPXQLNDFLMVNHRSUHPHLQVLVWHPRYNLREUDWXMHMRYIUHNYHQþQHPREPRþMXRG
95 kHz do 148,5 kHz in so namenjeni za uporabo v stanovanjih, poslovnih
prostorih in lahkoindustrijskih okoljih
(istoveten EN 50065-2-1:2003/A1:2005)
Signalling on low-voltage electrical installations in the frequency range 3 kHz to
148,5 kHz – Part 2-1: Immunity requirements for mains communications equipment
and systems operating in the range of frequencies 95 kHz to 148,5 kHz and
intended for use in residential, commercial and light industrial environments
ICS 5HIHUHQþQDãWHYLOND
33.040.30; 33.100.20
SIST EN 50065-2-1:2004/A1:2006(en)
! "#$%!&!%’()*#+’

---------------------- Page: 1 ----------------------

EUROPEAN STANDARD EN 50065-2-1/A1
NORME EUROPÉENNE
EUROPÄISCHE NORM September 2005

ICS 33.040.30

English version

Signalling on low-voltage electrical installations
in the frequency range 3 kHz to 148,5 kHz
Part 2-1: Immunity requirements for mains communications equipment
and systems operating in the range of frequencies 95 kHz to 148,5 kHz
and intended for use in residential,
commercial and light industrial environments

Transmission de signaux sur les réseaux Signalübertragung auf elektrischen
électriques basse tension dans la bande Niederspannungsnetzen im
de fréquences de 3 kHz à 148,5 kHz Frequenzbereich 3 kHz bis 148,5 kHz
Partie 2-1: Exigences d'immunité pour les Teil 2-1: Störfestigkeitsanforderungen an
appareils et les systèmes de Netz-Datenübertragungsgeräte und -
communication sur le réseau électrique systeme, die im Frequenzbereich 95 kHz
dans la bande de fréquences de 95 kHz bis 148,5 kHz betrieben werden und für
à 148,5 kHz et destinés à être utilisés den Gebrauch in Wohnbereichen,
dans les environnements résidentiel, Geschäfts- und Gewerbebereichen sowie
commercial et de l'industrie légère in Kleinbetrieben bestimmt sind


This amendment A1 modifies the European Standard EN 50065-2-1:2003; it was approved by CENELEC
on 2005-07-01. CENELEC members are bound to comply with the CEN/CENELEC Internal Regulations
which stipulate the conditions for giving this amendment the status of a national standard without any
alteration.

Up-to-date lists and bibliographical references concerning such national standards may be obtained on
application to the Central Secretariat or to any CENELEC member.

This amendment exists in three official versions (English, French, German). A version in any other language
made by translation under the responsibility of a CENELEC member into its own language and notified to the
Central Secretariat has the same status as the official versions.

CENELEC members are the national electrotechnical committees of Austria, Belgium, Cyprus, Czech
Republic, Denmark, Estonia, Finland, France, Germany, Greece, Hungary, Iceland, Ireland, Italy, Latvia,
Lithuania, Luxembourg, Malta, Netherlands, Norway, Poland, Portugal, Slovakia, Slovenia, Spain, Sweden,
Switzerland and United Kingdom.

CENELEC
European Committee for Electrotechnical Standardization
Comité Européen de Normalisation Electrotechnique
Europäisches Komitee für Elektrotechnische Normung

Central Secretariat: rue de Stassart 35, B - 1050 Brussels


© 2005 CENELEC - All rights of exploitation in any form and by any means reserved worldwide for CENELEC members.

Ref. No. EN 50065-2-1:2003/A1:2005 E

---------------------- Page: 2 ----------------------

EN 50065-2-1:2003/A1:2005 - 2 -

Foreword
This amendment to the European Standard EN 50065-2-1:2003 was prepared by SC 205A, Mains
communicating systems, of Technical Committee CENELEC TC 205, Home and Building Electronic
Systems (HBES).
The text of the draft was submitted to the Unique Acceptance Procedure and was approved by
CENELEC as amendment A1 to EN 50065-2-1:2003 on 2005-07-01.
The following dates were fixed:
– latest date by which the amendment has to be implemented
at national level by publication of an identical
national standard or by endorsement (dop) 2006-07-01
– latest date by which the national standards conflicting
with the amendment have to be withdrawn (dow) 2008-07-01
__________

---------------------- Page: 3 ----------------------

- 3 - EN 50065-2-1:2003/A1:2005

1 Scope
This standard applies to electrical equipment using signals in the frequency range 95 kHz to
148,5 kHz to transmit or receive information on low voltage electrical systems, residential, commercial
and light industrial environments. In the case of equipment which includes functions other than the
tra
...