SIST EN 3660-064:2016

2003-01.Slovenski inštitut za standardizacijo. Razmnoževanje celote ali delov tega standarda ni dovoljeno.Luft- und Raumfahrt - Endgehäuse für elektrische und optische Rund- und Rechtecksteckverbinder - Teil 064: Endgehäuse, Bauform K, gerade, für wärmeschrumpfende Bauteile, Schirmanschluß, abgedichtet, selbstsichernd für EN 2997 - ProduktnormSérie aérospatiale - Accessoires arrière pour connecteurs circulaires et rectangulaires électriques et optiques - Partie 064 : Raccord, type K, droit, blindé, étanche, pour manchon thermorétractable, auto-freiné pour EN 2997 - Norme de produitAerospace series - Cable outlet accessories for circular and rectangular electrical and optical connectors - Part 064: Cable outlet, style K, straight, for heat shrinkable boot, shielded, sealed, self-locking for EN 2997 - Product standard49.060Aerospace electric equipment and systems31.220.99Druge elektromehanske komponenteOther electromechanical componentsICS:Ta slovenski standard je istoveten z:EN 3660-064:2016SIST EN 3660-064:2016en,fr,de01-marec-2016SIST EN 3660-064:2016SLOVENSKI
STANDARDSIST EN 3660-064:20101DGRPHãþD



SIST EN 3660-064:2016



EUROPEAN STANDARD NORME EUROPÉENNE EUROPÄISCHE NORM
EN 3660-064
January
t r s x ICS
v {ä r x r Supersedes EN
u x x ræ r x vã t r r {English Version
Aerospace series æ Cable outlet accessories for circular and rectangular electrical and optical connectors æ Part
r x vã Cable outletá style Ká straightá for heat shrinkable bootá shieldedá sealedá selfælocking for EN
t { { y æ Product standard Série aérospatiale æ Accessoires arrière pour connecteurs circulaires et rectangulaires électriques et optiques æ Partie
r x v ã Raccordá type Ká droitá blindéá étancheá pour manchon thermorétractableá autoæfreiné pour EN
t { { y æ Norme de produit
Luftæ und Raumfahrt æ Endgehäuse für elektrische und optische Rundæ und Rechtecksteckverbinder æ Teil
r x vã Endgehäuseá Bauform Ká geradeá für wärmeschrumpfende Bauteileá Schirmanschlußá abgedichtetá selbstsichernd für EN
t { { y æ Produktnorm This European Standard was approved by CEN on
z June
t r s wä
egulations which stipulate the conditions for giving this European Standard the status of a national standard without any alterationä Upætoædate lists and bibliographical references concerning such national standards may be obtained on application to the CENæCENELEC Management Centre or to any CEN memberä
translation under the responsibility of a CEN member into its own language and notified to the CENæCENELEC Management Centre has the same status as the official versionsä
CEN members are the national standards bodies of Austriaá Belgiumá Bulgariaá Croatiaá Cyprusá Czech Republicá Denmarká Estoniaá Finlandá Former Yugoslav Republic of Macedoniaá Franceá Germanyá Greeceá Hungaryá Icelandá Irelandá Italyá Latviaá Lithuaniaá Luxembourgá Maltaá Netherlandsá Norwayá Polandá Portugalá Romaniaá Slovakiaá Sloveniaá Spainá Swedená Switzerlandá Turkey andUnited Kingdomä
EUROPEAN COMMITTEE FOR STANDARDIZATION COMITÉ EUROPÉEN DE NORMALISATION EUROPÄISCHES KOMITEE FÜR NORMUNG
CEN-CENELEC Management Centre:
Avenue Marnix 17,
B-1000 Brussels
9
t r s x CEN All rights of exploitation in any form and by any means reserved worldwide for CEN national Membersä Refä Noä EN
u x x ræ r x vã t r s x ESIST EN 3660-064:2016



EN 3660-064:2016 (E) 2 Contents Page European foreword . 3 1 Scope . 4 2 Normative references . 4 3 Terms and definitions . 5 4 Characteristics . 5 5 Tests . 13 6 Designation . 20 7 Marking . 20 8 Technical specification . 20
SIST EN 3660-064:2016



EN 3660-064:2016 (E) 3 European foreword This document (EN 3660-064:2016) has been prepared by the Aerospace and Defence Industries Association of Europe - Standardization (ASD-STAN). After enquiries and votes carried out in accordance with the rules of this Association, this European Standard has received the approval of the National Associations and the Official Services of the member countries of ASD, prior to its presentation to CEN. This European Standard shall be given the status of a national standard, either by publication of an identical text or by endorsement, at the latest by July 2016, and conflicting national standards shall be withdrawn at the latest by July 2016. Attention is drawn to the possibility that some of the elements of this document may be the subject of patent rights. CEN [and/or CENELEC] shall not be held responsible for identifying any or all such patent rights. This document supersedes EN 3660-064:2009. According to the CEN-CENELEC Internal Regulations, the national standards organizations of the following countries are bound to implement this European Standard: Austria, Belgium, Bulgaria, Croatia, Cyprus, Czech Republic, Denmark, Estonia, Finland, Former Yugoslav Republic of Macedonia, France, Germany, Greece, Hungary, Iceland, Ireland, Italy, Latvia, Lithuania, Luxembourg, Malta, Netherlands, Norway, Poland, Portugal, Romania, Slovakia, Slovenia, Spain, Sweden, Switzerland, Turkey and the United Kingdom. SIST EN 3660-064:2016



EN 3660-064:2016 (E) 4 1 Scope This European Standard defines a range of cable outlets, style K, straight, shielded, sealed, self-locking (anti-rotational) for heat shrinkable boot, and / or metallic band under the following conditions: The mating connectors are listed in EN 3660-002. NOTE Class N in EN 3660-001 cross refers to class F in EN 3660-064. Temperature range, Class F (N) : − 65 °C to 200 °C (See note above); Class K : − 65 °C to 200 °C; Class KE : − 65 °C to 260 °C; Class W : − 65 °C to 175 °C; Class T : − 65 °C to 175 °C (Nickel PTFE plating); Class Z : − 65 °C to 175 °C (Zinc Nickel plating). Associated electrical accessories : EN 3660-033 Metallic band (for shield termination). These cable outlets are designed for termination of overall shielding braid and / or individual cable shields. They accommodate/permit the termination of heat shrinkable boots. 2 Normative references The following documents, in whole or in part, are normatively referenced in this document and are indispensable for its application. For dated references, only the edition cited applies. For undated references, the latest edition of the referenced document (including any amendments) applies.
EN 2591- 1), Aerospace series — Elements of electrical and optical connection — Test methods EN 2997 (series), Aerospace series — Connectors, electrical, circular, coupled by threaded ring, fire-resistant or non fire-resistant, operating temperatures − 65 °C to 175 °C continuous, 200 °C continuous, 260 °C peak
EN 3660-001, Aerospace series — Cable outlet accessories for circular and rectangular electrical and optical connectors — Part 001: Technical specification
EN 3660-002, Aerospace series — Cable outlet accessories for circular and rectangular electrical and optical connectors — Part 002: Index of product standards
EN 3660-033, Aerospace series — Cable outlet accessories for circular and rectangular electrical and optical connectors — Part 033: Stainless steel banding band, style Z, for attachment of individual and/or overall screens to cable outlets — Product standard 2) AS85049A, Connector accessories, electrical general specification for- 3) IEC 60529, Degrees of protection provided by enclosures (IP Code)
DIN 82, Knurling
1) All its parts quoted in this European Standard. 2) In preparation at the date of publication of this European Standard. 3) Published by: SAE National (US) Society of Automotive Engineers http://www.sae.org/ SIST EN 3660-064:2016



EN 3660-064:2016 (E) 5 3 Terms and definitions For the purposes of this document, the terms and definitions given in EN 3660-001 apply. (Self-locking / anti rotational definition) A self-locking or anti rotational mechanism provides a nut rotation with moderate torque in the mated direction and provides a greater torque in the unmated direction. 4 Characteristics 4.1 Dimensions and mass For dimensions and mass, see Figure 1 and Table 1 to Table 4. For cable entry dimensions, see 4.2. All dimensions are in millimetres.
Key 1 Thread C 2 Marking 3 Number of teeth N 4 Four tooling holes spaced 90° apart. Ø 2,60, depth, 1,27 5 Straight knurl. Pitch manufacturer’s option. 6 RKV 08 DIN 82. Figure 2. (Please note there may be crossover dependent on diameter and pitch) 7 Clearance on thread C 8 Break edge NOTE 1 Cable outlets may be manufactured as cast, fabricated or machined (manufactures option) NOTE 2 No sharp edges / burrs permissible on internal or external surfaces / joints. Surface finish of
on all internal surfaces Figure 1 1,6 µm max. SIST EN 3660-064:2016



EN 3660-064:2016 (E) 6 Table 1 — Fixed dimensions of shell Dimensions in millimetres Shell size Ø A Ø B C E max. max. Thread max. 08 22,48 15,67 0,500-20UNF 15,3 10 25,65 18,64 0,625-24UNEF 15,3 12 28,83 21,79 0,750-20UNEF 15,3 14 32,00 24,99 0,875-20UNEF 15,3 16 35,18 28,24 1,000-20UNEF 15,3 18 38,55 30,94 1,0625-18UNEF 15,3 20 41,53 34,16 1,1875-18UNEF 15,3 22 44,70 37,29 1,3125-18UNEF 15,3 24 47,89 40,46 1,4375-18UNEF 15,3 28 54,23 49,45 1,750-18UNS 15,3
Table 2 — Variable dimensions of wiring chamber Dimensions in millimetres Length code wiring chamber H J max. max. A 27,5 8,57 B 35,5 16,57 C 40,5 21,60 D 50,5 31,60 The code and dimensions of the wiring chamber shall be valid for all sizes of cable outlet.
Table 3 — Mass for classes F (N), T, W and Z
Nominal mass in grams Shell size code Cable entry – size code Length code wiring chamber A B C D E F G H J K L M 08 10,7 11,3 — — — — — — — — — — A 11,4 12,0 — — — — — — — — — — B 11,9 12,5 — — — — — — — — — — C 12,7 13,3 — — — — — — — — — — D 10 12,4 13,1 13,7 14,3 — — — — — — — — A 13,4 14,1 14,7 15,3 — — — — — — — — B 14,0 14,7 15,3 15,9 — — — — — — — — C SIST EN 3660-064:2016



EN 3660-064:2016 (E) 7 Shell size code Cable entry – size code Length code wiring chamber A B C D E F G H J K L M 15,2 15,9 16,6 17,1 — — — — — — — — D 12 14,5 14,9 15,3 16,1 16,6 17,2 — — — — — — A 15,7 16,2 16,6 17,3 17,9 18,4 — — — — — — B 16,5 16,9 17,4 18,1 18,7 19,2 — — — — — — C 18,1 18,5 18,9 19,6 20,2 20,7 — — — — — — D 14 17,8 18,2 18,6 19,0 19,2 20,0 21,2 — — — — — A 19,3 19,7 20,1 20,5 20,8 21,6 22,7 — — — — — B 20,3 20,7 21,1 21,4 21,7 22,5 23,7 — — — — — C 22,2 22,6 23,0 23,3 23,6 24,4 25,6 — — — — — D 16 20,0 20,5 20,9 21,2 21,5 21,8 23,0 24,0 — — — — A 21,8 22,3 22,7 23,0 23,3 23,6 24,8 25,8 — — — — B 23,0 23,4 23,8 24,1 24,4 24,7 25,9 27,0 — — — — C 25,2 25,6 26,0 26,4 26,7 27,0 28,1 29,2 — — — — D 18 21,2 21,6 22,0 22,4 22,6 22,9 23,5 24,9 — x — — A 23,2 23,6 24,0 24,4 24,6 24,9 25,5 26,9 — — — — B 24,4 24,8 25,2 25,6 25,9 26,2 26,7 28,2 — — — — C 26,9 27,3 27,7 28,1 28,4 28,7 29,2 30,6 — — — — D 20 25,7 26,1 26,5 26,9 27,2 27,5 28,0 28,4 29,6
...