SIST ISO 1718:1997
(Main)Rock drilling equipment -- Drill rods with tapered connection for percussive drilling
Rock drilling equipment -- Drill rods with tapered connection for percussive drilling
Lays down the basic dimensions of drill rods and the necessary dimensions of the tapered connections. These dimensions shall comply with those given in figure 1 and table 1 and in figure 2 and table 2, respectively.
Matériel de forage des roches -- Fleurets à raccord conique pour forage percutant
Oprema za vrtanje kamnin - Vrtalno drogovje s stožčastim priključkom za udarno vrtanje
General Information
- Status
- Published
- Publication Date
- 31-Jul-1997
- Technical Committee
- IRUD - Mining
- Current Stage
- 6060 - National Implementation/Publication (Adopted Project)
- Start Date
- 01-Aug-1997
- Due Date
- 01-Aug-1997
- Completion Date
- 01-Aug-1997
Relations
- Effective Date
- 12-May-2008
Overview
SIST ISO 1718:1997 is an international standard developed by the International Organization for Standardization (ISO) that defines the basic dimensions for rock drilling equipment, specifically focusing on drill rods with tapered connections used in percussive drilling. This standard establishes the necessary dimensions for both drill rods and their tapered connections to ensure compatibility, safety, and interoperability across different manufacturers and mining operations.
The document applies to drill rods intended for use in mining and geological applications where percussive drilling methods are employed. It aims to standardize dimensions and tolerances to streamline equipment manufacturing and improve efficiency in the field.
Key Topics
Tapered Drill Rods Dimensions
SIST ISO 1718:1997 provides precise measurements for the length and cross-section of drill rods with tapered ends. These include nominal sizes standardized to optimize compatibility with related drilling tools.Tapered Connections
The standard defines both internal and external tapered connections for drill rods, specifying taper angles, diameters, and allowable tolerances. Figures and tables within the standard detail size specifications for each drill rod type.Material Compatibility
Drill rods covered by this standard are designed for use with forged collar shanks and hexagonal drill steels, conforming with ISO 723 and ISO 722 standards, respectively.Conformance and Safety
By laying down common dimensions, SIST ISO 1718:1997 supports safe and reliable interchange of components in percussive rock drilling, reducing downtime and enhancing operational safety.
Applications
Mining Industry
Widely used in mineral exploration and extraction, this standard enables mining operations to select drill rods and accessories that fit precisely with their existing drilling rigs and bits, facilitating efficient percussion drilling.Geotechnical Engineering
In soil and rock sampling, the specified drill rods with tapered connections ensure equipment consistency and durability during borehole drilling.Construction and Infrastructure
Used in rock drilling for foundational piling and tunneling, adherence to this ISO standard helps ensure high-quality drilling performance and maintenance ease.Manufacturing of Drilling Equipment
Manufacturers rely on SIST ISO 1718:1997 dimensional data when producing drill rods, ensuring global interoperability and compliance with international quality standards.
Related Standards
ISO 722:1990 – Rock drilling equipment – Hollow drill steels in bar form, hexagonal and round
Defines the specifications for the drill steels compatible with the rod dimensions specified in ISO 1718.ISO 723:1990 – Rock drilling equipment – Forged collared shanks and corresponding chuck bushings for hollow hexagonal drill steels
Covers related components that interface with drill rods as per ISO 1718 tapered connection specifications.
Keywords: ISO 1718 1991, rock drilling equipment, drill rods, tapered connection, percussive drilling, mining equipment standards, drill rod dimensions, tapered drill rods, drilling rod standard, rock drilling standards, percussion drilling rods, drill rod compatibility, mining drill rods, mining standards, ISO rock drilling standards.
ISO 1718:1991 - Rock drilling equipment -- Drill rods with tapered connection for percussive drilling
ISO 1718:1991 - Matériel de forage des roches -- Fleurets a raccord conique pour forage percutant
ISO 1718:1991 - Matériel de forage des roches -- Fleurets a raccord conique pour forage percutant
Frequently Asked Questions
SIST ISO 1718:1997 is a standard published by the Slovenian Institute for Standardization (SIST). Its full title is "Rock drilling equipment -- Drill rods with tapered connection for percussive drilling". This standard covers: Lays down the basic dimensions of drill rods and the necessary dimensions of the tapered connections. These dimensions shall comply with those given in figure 1 and table 1 and in figure 2 and table 2, respectively.
Lays down the basic dimensions of drill rods and the necessary dimensions of the tapered connections. These dimensions shall comply with those given in figure 1 and table 1 and in figure 2 and table 2, respectively.
SIST ISO 1718:1997 is classified under the following ICS (International Classification for Standards) categories: 73.100.30 - Equipment for drilling and mine excavation. The ICS classification helps identify the subject area and facilitates finding related standards.
SIST ISO 1718:1997 has the following relationships with other standards: It is inter standard links to ISO 1718:1974. Understanding these relationships helps ensure you are using the most current and applicable version of the standard.
You can purchase SIST ISO 1718:1997 directly from iTeh Standards. The document is available in PDF format and is delivered instantly after payment. Add the standard to your cart and complete the secure checkout process. iTeh Standards is an authorized distributor of SIST standards.
Standards Content (Sample)
SLOVENSKI STANDARD
01-avgust-1997
2SUHPD]DYUWDQMHNDPQLQ9UWDOQRGURJRYMHVVWRåþDVWLPSULNOMXþNRP]DXGDUQR
YUWDQMH
Rock drilling equipment -- Drill rods with tapered connection for percussive drilling
Matériel de forage des roches -- Fleurets à raccord conique pour forage percutant
Ta slovenski standard je istoveten z: ISO 1718:1991
ICS:
73.100.30 Oprema za vrtanje in Equipment for drilling and
izkopavanje mine excavation
2003-01.Slovenski inštitut za standardizacijo. Razmnoževanje celote ali delov tega standarda ni dovoljeno.
INTERNATIONAL
STANDARD
Second edition
1991-01-15
Rock drilling equipment - Drill rods with
tapered connection for percussive drilling
- Fleurets 3 raccord conique pour forage
Maf&iel de forage des roches
percufant
Reference number
ISO l718:199l(E)
1SQ (the International Organkation for Standardkation) Os a worldwide
federation sf national standards bsdies (ISO member bodiesj. The wsrk
of preparing International Standards is norn7aIly carried out through KXI
technicak csmrnittees. Esch member body interested in a subject for
which a technical conmittee has been estabtished has the right to be
represented on that com-nittee. International organiaations, govern-
mental and non-governmental, in liaison with Kl, also take pati’in the
vvork. ISO collaborates closely with the International Electrotechnical
Comrnission (EC) on all matters of ekctrstechnic~l star-odardization.
Draft International Standards adspted by the technical co~~iflees are
circuiated to the rnernber bodies for voting. PubOication as an Inter-
national Standard requires approval by at least 75 o/o sf the nrernber
bodies casting a vote.
international Standard ISO 4718 was prepared by Technical Committee
ISQ/TC 82, Mining.
Chis secsnd edition cancels and repiaces the first edition (EO %718:
2974), which has been technically revised (addition of sizes 7” x 25 and
12” x 25, amendments of lengths and deletion of tapered bits and
thimbles).
0 ISO 1991
All rights reserved. No part of this publication may be reproduced or utilized in any form
or by any means, electronie or mechanical, including photocopying and microfilm, without
Permission in writing from the publisher.
International Organization for Standardization
Case Postate 56 l CH-1211 Geneve 20 l Switzerland
Printe
...
INTERNATIONAL
STANDARD
Second edition
1991-01-15
Rock drilling equipment - Drill rods with
tapered connection for percussive drilling
- Fleurets 3 raccord conique pour forage
Maf&iel de forage des roches
percufant
Reference number
ISO l718:199l(E)
1SQ (the International Organkation for Standardkation) Os a worldwide
federation sf national standards bsdies (ISO member bodiesj. The wsrk
of preparing International Standards is norn7aIly carried out through KXI
technicak csmrnittees. Esch member body interested in a subject for
which a technical conmittee has been estabtished has the right to be
represented on that com-nittee. International organiaations, govern-
mental and non-governmental, in liaison with Kl, also take pati’in the
vvork. ISO collaborates closely with the International Electrotechnical
Comrnission (EC) on all matters of ekctrstechnic~l star-odardization.
Draft International Standards adspted by the technical co~~iflees are
circuiated to the rnernber bodies for voting. PubOication as an Inter-
national Standard requires approval by at least 75 o/o sf the nrernber
bodies casting a vote.
international Standard ISO 4718 was prepared by Technical Committee
ISQ/TC 82, Mining.
Chis secsnd edition cancels and repiaces the first edition (EO %718:
2974), which has been technically revised (addition of sizes 7” x 25 and
12” x 25, amendments of lengths and deletion of tapered bits and
thimbles).
0 ISO 1991
All rights reserved. No part of this publication may be reproduced or utilized in any form
or by any means, electronie or mechanical, including photocopying and microfilm, without
Permission in writing from the publisher.
International Organization for Standardization
Case Postate 56 l CH-1211 Geneve 20 l Switzerland
Printed in Switzerland
ii
INTERNATIONAL STANDARD ISO 1718:1991 (E)
Rock drilling equipment - Drill rods with tapered connection
for percussive drilling
plying the most recent editions of the Standards in-
1 Scope
dicated below. Members of IEC and ISO maintain
registers of currently valid International Standards.
This International Standard specifies the basic di-
mensions of drill rods with tapered connection for
ISO 7223990, Rock drilling equipment - Hollow drill
percussive drilling and
...
NORME
INTERNATIONALE
Deuxième édition
1991-01-15
Matériel de forage des roches - Fleurets à
raccord conique pour forage percutant
Rock drilling equipment - Urill rods with tapered connection for
percussive drilling
Numéro de référence
Avant-propos
L’ISQ (Organisation internationale de normalisation) est une fédération
mondiale d’organismes nationaux de normalisation (comités membres
de I’ISO). L’élaboration des Normes internationales est en général
confiée aux comités techniques de I’ISO. Chaque comité membre inté-
ressé par une étude a le droit de faire partie du comité technique créé
à cet effet. Les organisations internationales, gouvernementales et non
gouvernementales, en liaison avec 1’150 participent également aUx tra-
vaux. L’ISO collabore étroitement avec la Commission électrotechnique
internationale (CEI) en ce qui concerne la normalisation électrotech-
nique.
Les projets de Normes internationales adoptés par les comités techni-
ques sont soumis aux comités membres pour vote. Leur publication
comme Normes internationales requiert l’approbation de 75 % au moins
des comités membres votants.
La Norme internationale ISO 1718 a été élaborée par le comité techni-
que ISO/TC 82, Exploitation minière.
Cette deuxième édition annule et remplace la première édition
(ISO 1718: 1974), qui a fait l’objet d’une révision technique: les dimen-
sions 7” x 25 et 12" x 25 ont été ajoutées et les articles 5 et 6, relatifs
aux taillants coniques et aux jupes intercalaires, ont été supprimés.
0 ISO 1991
Droits de reproduction réservés. Aucune partie de cette publication ne peut être repro-
duite ni utilisée sous quelque forme que ce soit et par aucun procédé, électronique ou
mécanique, y compris la photocopie et les microfilms, sans l’accord écrit de l’éditeur.
Organisation internationale de normalisation
Case Postale 56 l CH-1211 Genève 20 l Suisse
Imprimé en Suisse
ii
NORME INTERNATIONALE
Matériel de forage des roches - Fleurets à raccord conique
pour forage percutant
possibilité d’appliquer les éditions les plus récentes
1 Domaine d’application
des normes indiquées ci-après. Les membres de la
CEI et de I’ISO possèdent le registre des Normes
La présente Norme internationale prescrit les di-
internationales en vigueur à un moment donné.
mensions de base de
...
NORME
INTERNATIONALE
Deuxième édition
1991-01-15
Matériel de forage des roches - Fleurets à
raccord conique pour forage percutant
Rock drilling equipment - Urill rods with tapered connection for
percussive drilling
Numéro de référence
Avant-propos
L’ISQ (Organisation internationale de normalisation) est une fédération
mondiale d’organismes nationaux de normalisation (comités membres
de I’ISO). L’élaboration des Normes internationales est en général
confiée aux comités techniques de I’ISO. Chaque comité membre inté-
ressé par une étude a le droit de faire partie du comité technique créé
à cet effet. Les organisations internationales, gouvernementales et non
gouvernementales, en liaison avec 1’150 participent également aUx tra-
vaux. L’ISO collabore étroitement avec la Commission électrotechnique
internationale (CEI) en ce qui concerne la normalisation électrotech-
nique.
Les projets de Normes internationales adoptés par les comités techni-
ques sont soumis aux comités membres pour vote. Leur publication
comme Normes internationales requiert l’approbation de 75 % au moins
des comités membres votants.
La Norme internationale ISO 1718 a été élaborée par le comité techni-
que ISO/TC 82, Exploitation minière.
Cette deuxième édition annule et remplace la première édition
(ISO 1718: 1974), qui a fait l’objet d’une révision technique: les dimen-
sions 7” x 25 et 12" x 25 ont été ajoutées et les articles 5 et 6, relatifs
aux taillants coniques et aux jupes intercalaires, ont été supprimés.
0 ISO 1991
Droits de reproduction réservés. Aucune partie de cette publication ne peut être repro-
duite ni utilisée sous quelque forme que ce soit et par aucun procédé, électronique ou
mécanique, y compris la photocopie et les microfilms, sans l’accord écrit de l’éditeur.
Organisation internationale de normalisation
Case Postale 56 l CH-1211 Genève 20 l Suisse
Imprimé en Suisse
ii
NORME INTERNATIONALE
Matériel de forage des roches - Fleurets à raccord conique
pour forage percutant
possibilité d’appliquer les éditions les plus récentes
1 Domaine d’application
des normes indiquées ci-après. Les membres de la
CEI et de I’ISO possèdent le registre des Normes
La présente Norme internationale prescrit les di-
internationales en vigueur à un moment donné.
mensions de base de
...
Questions, Comments and Discussion
Ask us and Technical Secretary will try to provide an answer. You can facilitate discussion about the standard in here.
Loading comments...