SIST EN 61784-5-19:2014
(Main)Industrial communication networks - Profiles -- Part 5-19: Installation of fieldbuses - Installation profiles for CPF 19
Industrial communication networks - Profiles -- Part 5-19: Installation of fieldbuses - Installation profiles for CPF 19
This part of IEC 61784 specifies the installation profiles for CPF 19 (MECHATROLINK™1). The installation profiles are specified in the annexes. These annexes are read in conjunction with IEC 61918:2013.
Industrielle Kommunikationsnetze - Profile -- Teil 5-19: Feldbusinstallation - Installationsprofile für die Kommunikationsprofilfamilie 19
Réseaux de communication industriels - Profils -- Partie 5-19: Installation des bus de terrain - Profils d'installation pour CPF 19
La CEI 61784-5-19:2013 définit les profils d'installation pour la CPF 19 (MECHATROLINK). Chaque profil d'installation de CP est spécifié dans une partie séparée de la présente série de normes. Cette norme fait partie d'une série élaborée pour faciliter l'utilisation des réseaux de communication dans des systèmes de contrôle-commande industriels. La présente norme doit être utilisée conjointement à la CEI 61918:2013.
Industrijska komunikacijska omrežja - Profili - 5-19. del: Inštalacija procesnih vodil - Inštalacijski profili za CPF 19 (IEC 61784-5-19:2013)
General Information
Relations
Standards Content (Sample)
SLOVENSKI STANDARD
SIST EN 61784-5-19:2014
01-april-2014
Industrijska komunikacijska omrežja - Profili - 5-19. del: Inštalacija procesnih vodil
- Inštalacijski profili za CPF 19 (IEC 61784-5-19:2013)
Industrial communication networks - Profiles -- Part 5-19: Installation of fieldbuses -
Installation profiles for CPF 19
Industrielle Kommunikationsnetze - Profile -- Teil 5-19: Feldbusinstallation -
Installationsprofile für die Kommunikationsprofilfamilie 19
Réseaux de communication industriels - Profils -- Partie 5-19: Installation des bus de
terrain - Profils d'installation pour CPF 19
Ta slovenski standard je istoveten z: EN 61784-5-19:2013
ICS:
25.040.40 Merjenje in krmiljenje Industrial process
industrijskih postopkov measurement and control
35.100.40 Transportni sloj Transport layer
SIST EN 61784-5-19:2014 en,fr,de
2003-01.Slovenski inštitut za standardizacijo. Razmnoževanje celote ali delov tega standarda ni dovoljeno.
---------------------- Page: 1 ----------------------
SIST EN 61784-5-19:2014
---------------------- Page: 2 ----------------------
SIST EN 61784-5-19:2014
EUROPEAN STANDARD
EN 61784-5-19
NORME EUROPÉENNE
December 2013
EUROPÄISCHE NORM
ICS 25.040.40; 35.100.40
English version
Industrial communication networks -
Profiles -
Part 5-19: Installation of fieldbuses -
Installation profiles for CPF 19
(IEC 61784-5-19:2013)
Réseaux de communication industriels - Industrielle Kommunikationsnetze -
Profils - Profile -
Partie 5-19: Installation des bus de terrain Teil 5-19: Feldbusinstallation -
- Profils d'installation pour CPF 19 Installationsprofile für die
(CEI 61784-5-19:2013) Kommunikationsprofilfamilie 19
(IEC 61784-5-19:2013)
This European Standard was approved by CENELEC on 2013-10-14. CENELEC members are bound to comply
with the CEN/CENELEC Internal Regulations which stipulate the conditions for giving this European Standard
the status of a national standard without any alteration.
Up-to-date lists and bibliographical references concerning such national standards may be obtained on
application to the CEN-CENELEC Management Centre or to any CENELEC member.
This European Standard exists in three official versions (English, French, German). A version in any other
language made by translation under the responsibility of a CENELEC member into its own language and notified
to the CEN-CENELEC Management Centre has the same status as the official versions.
CENELEC members are the national electrotechnical committees of Austria, Belgium, Bulgaria, Croatia, Cyprus,
the Czech Republic, Denmark, Estonia, Finland, Former Yugoslav Republic of Macedonia, France, Germany,
Greece, Hungary, Iceland, Ireland, Italy, Latvia, Lithuania, Luxembourg, Malta, the Netherlands, Norway, Poland,
Portugal, Romania, Slovakia, Slovenia, Spain, Sweden, Switzerland, Turkey and the United Kingdom.
CENELEC
European Committee for Electrotechnical Standardization
Comité Européen de Normalisation Electrotechnique
Europäisches Komitee für Elektrotechnische Normung
CEN-CENELEC Management Centre: Avenue Marnix 17, B - 1000 Brussels
© 2013 CENELEC - All rights of exploitation in any form and by any means reserved worldwide for CENELEC members.
Ref. No. EN 61784-5-19:2013 E
---------------------- Page: 3 ----------------------
SIST EN 61784-5-19:2014
EN 61784-5-19:2013 - 2 -
Foreword
The text of document 65C/738/FDIS, future edition 1 of IEC 61784-5-19, prepared by
SC 65C "Industrial networks" of IEC/TC 65 "Industrial-process measurement, control and automation"
was submitted to the IEC-CENELEC parallel vote and approved by CENELEC as
EN 61784-5-19:2013.
The following dates are fixed:
• latest date by which the document has to be (dop) 2014-07-14
implemented at national level by
publication of an identical national
standard or by endorsement
(dow) 2016-10-14
• latest date by which the national
standards conflicting with the
document have to be withdrawn
This standard is to be used in conjunction with EN 61918:2013.
Attention is drawn to the possibility that some of the elements of this document may be the subject of
patent rights. CENELEC [and/or CEN] shall not be held responsible for identifying any or all such
patent rights.
Endorsement notice
The text of the International Standard IEC 61784-5-19:2013 was approved by CENELEC as a
European Standard without any modification.
---------------------- Page: 4 ----------------------
SIST EN 61784-5-19:2014
- 3 - EN 61784-5-19:2013
Annex ZA
(normative)
Normative references to international publications
with their corresponding European publications
The following documents, in whole or in part, are normatively referenced in this document and are
indispensable for its application. For dated references, only the edition cited applies. For undated
references, the latest edition of the referenced document (including any amendments)
...
Questions, Comments and Discussion
Ask us and Technical Secretary will try to provide an answer. You can facilitate discussion about the standard in here.