SIST EN 60061-3:2000/A29:2004
(Amendment)Lamp caps and holders together with gauges for the control of interchangeability and safety -- Part 3: Gauges
Lamp caps and holders together with gauges for the control of interchangeability and safety -- Part 3: Gauges
Subscribe to IEC 60061 Database to access the full and updated content of the series.
Lampensockel und -fassungen sowie Lehren zur Kontrolle der Austauschbarkeit und Sicherheit -- Teil 3: Lehren
Culots de lampes et douilles ainsi que calibres pour le contrôle de l'interchangeabilité et de la sécurité -- Partie 3: Calibres
Subscribe to IEC 60061 Database to access the full and updated content of the series.
Vznožki in okovi žarnic in sijalk skupaj s kalibri za kontrolo medsebojne zamenljivosti in varnosti – 3. del: Kalibri (IEC 60061-3:1969/A29:2002)
General Information
Relations
Standards Content (Sample)
SLOVENSKI SIST EN 60061-
3:2000/A29:2004
STANDARD
januar 2004
(istoveten EN 60061-3:1993/A29:2002)
Lamp caps and holders together with gauges for the control of interchangeability
and safety - Part 3: Gauges - Amendment A29 (IEC 60061-3:1969/A29:2002)
ICS 29.140.10 Referenčna številka
SIST EN 60061-3:2000/A29:2004(en,fr)
© Standard je založil in izdal Slovenski inštitut za standardizacijo. Razmnoževanje ali kopiranje celote ali delov tega dokumenta ni dovoljeno
---------------------- Page: 1 ----------------------
EUROPEAN STANDARD EN 60061-3/A29
NORME EUROPÉENNE
EUROPÄISCHE NORM November 2002
ICS 29.140.10
English version
Lamp caps and holders together with gauges for the control
of interchangeability and safety
Part 3: Gauges
(IEC 60061-3:1969/A29:2002)
Culots de lampes et douilles Lampensockel und -fassungen
ainsi que calibres pour le contrôle sowie Lehren zur Kontrolle
de l'interchangeabilité et de la sécurité der Austauschbarkeit und Sicherheit
Partie 3: Calibres Teil 3: Lehren
(CEI 60061-3:1969/A29:2002) (IEC 60061-3:1969/A29:2002)
This amendment A29 modifies the European Standard EN 60061-3:1993; it was approved by CENELEC
on 2002-11-01. CENELEC members are bound to comply with the CEN/CENELEC Internal Regulations
which stipulate the conditions for giving this amendment the status of a national standard without any
alteration.
Up-to-date lists and bibliographical references concerning such national standards may be obtained on
application to the Central Secretariat or to any CENELEC member.
This amendment exists in three official versions (English, French, German). A version in any other language
made by translation under the responsibility of a CENELEC member into it
...
Questions, Comments and Discussion
Ask us and Technical Secretary will try to provide an answer. You can facilitate discussion about the standard in here.