iTeh StandardsiTeh Standards
EURUSD
Your shopping cart is empty.
SIST

SIST EN ISO 25110:2018

(Main)

Electronic fee collection - Interface definition for on-board account using integrated circuit card (ICC) (ISO 25110:2017)

Electronic fee collection - Interface definition for on-board account using integrated circuit card (ICC) (ISO 25110:2017)

This document defines the data transfer models between roadside equipment (RSE) and integrated
circuit card (ICC) and the interface descriptions between the RSE and on-board equipment (OBE) for
on-board accounts using the ICC. It also provides examples of interface definitions and transactions
deployed in several countries.
This document covers:
— data transfer models between the RSE and ICC which correspond to the categorized operational
requirements and the data transfer mechanism for each model;
— interface definition between the RSE and OBE based on each data transfer model;
— interface definition for each model;
— functional configuration;
— RSE command definitions for ICC access;
— data format and data element definitions of RSE commands;
— a transaction example for each model in Annex B.

Elektronische Gebührenerhebung - Schnittstellendefinition für die fahrzeugseitige bordeigene Datenverwaltung mit Chipkarte (ICC) (ISO 25110:2017)

Perception du télépéage - Définition d'interface pour compte de bord utilisant une carte à circuit intégré (ICC) (ISO 25110:2017)

ISO 25110:2017 définit les modèles de transfert de données entre les équipements routiers (RSE) et les cartes à circuit intégré (ICC), et décrit les interfaces entre les RSE et l'équipement embarqué (OBE) pour le compte de bord s'appuyant sur l'ICC. Il fournit également des exemples de définitions d'interfaces et de transactions déployées dans plusieurs pays.
ISO 25110:2017 couvre les aspects suivants:
-      modèles de transfert de données entre les RSE et les ICC correspondant aux exigences opérationnelles catégorisées, et le mécanisme de transfert des données pour chaque modèle,
-      définition d'interface entre RSE et OBE en fonction de chaque modèle de transfert de données,
-      définition d'interface pour chaque modèle,
-      configuration fonctionnelle,
-      définition des commandes RSE pour l'accès à l'ICC,
-      format des données et définition des éléments de données pour les commandes RSE, et
-      un exemple de transaction pour chaque modèle en Annexe B.

Elektronsko pobiranje pristojbin - Definicija vmesnika za obračun pristojbin, ki uporablja kartico z integriranim vezjem (ICC) (ISO 25110:2017)

Ta dokument določa načine prenosa podatkov med obcestno opremo (RSE) in kartico z integriranim vezjem (ICC) ter opise vmesnikov med obcestno opremo in opremo v vozilu za obračun pristojbin (OBE), ki uporablja kartico z integriranim vezjem. Podaja tudi primere definicij vmesnika in transakcije, ki se uporabljajo v več državah.
Ta dokument obravnava:
– načine prenosa podatkov med obcestno opremo in kartico z integriranim vezjem, ki ustreza kategoriziranim zahtevam delovanja, ter način prenosa podatkov za vsak model;
– definicijo vmesnika med obcestno opremo in kartico z integriranim vezjem, ki temelji na posameznem modelu prenosa podatkov;
– definicijo vmesnika za vsak model;
– funkcionalno konfiguracijo;
– definicijo upravljanja obcestne opreme za dostop s kartico z integriranim vezjem;
– obliko podatkov in definicije elementov podatkov ukazov za obcestno opremo;
– primer prenosa za vsak model v dodatku B.

General Information

Status
Withdrawn
Publication Date
06-Mar-2018
Withdrawal Date
19-Dec-2023
ICS
03.220.01 - Transport in general
35.240.60 - IT applications in transport
Technical Committee
ITC - Information technology
Current Stage
9900 - Withdrawal (Adopted Project)
Start Date
19-Dec-2023
Due Date
11-Jan-2024
Completion Date
20-Dec-2023
Directive
2004/52/EC - Interoperability of electronic road toll systems in the Community
Mandate
M/338 - Standardisation mandate to CEN, CENELEC and ETSI in support of interoperabilty of electonic road toll systems in the community
Ref Project
EN ISO 25110:2017 - Electronic fee collection - Interface definition for on-board account using integrated circuit card (ICC) (ISO 25110:2017)

Relations

Replaces
SIST-TS CEN ISO/TS 25110:2013 - Electronic fee collection - Interface definition for on-board account using integrated circuit card (ICC) (ISO/TS 25110:2013)
Effective Date
01-Apr-2018

Buy Standard

EN ISO 25110:2018 - BARVEEN ISO 25110:2018 - BARVE
PreviousNext
Standard
EN ISO 25110:2018 - BARVE
English language
43 pages
sale 10% off
Preview
sale 10% off
Preview
e-Library read for
1 day

Standards Content (Sample)

SLOVENSKI STANDARD
SIST EN ISO 25110:2018
01-april-2018
1DGRPHãþD
SIST-TS CEN ISO/TS 25110:2013
(OHNWURQVNRSRELUDQMHSULVWRMELQ'HILQLFLMDYPHVQLND]DREUDþXQSULVWRMELQNL
XSRUDEOMDNDUWLFR]LQWHJULUDQLPYH]MHP ,&&  ,62
Electronic fee collection - Interface definition for on-board account using integrated circuit
card (ICC) (ISO 25110:2017)
Perception du télépéage - Définition d'interface pour compte de bord utilisant une carte à
circuit intégré (ICC) (ISO 25110:2017)
Ta slovenski standard je istoveten z: EN ISO 25110:2017
ICS:
03.220.01 Transport na splošno Transport in general
35.240.60 Uporabniške rešitve IT v IT applications in transport
prometu
SIST EN ISO 25110:2018 en,fr,de
2003-01.Slovenski inštitut za standardizacijo. Razmnoževanje celote ali delov tega standarda ni dovoljeno.

---------------------- Page: 1 ----------------------

SIST EN ISO 25110:2018

---------------------- Page: 2 ----------------------

SIST EN ISO 25110:2018


EN ISO 25110
EUROPEAN STANDARD

NORME EUROPÉENNE

December 2017
EUROPÄISCHE NORM
ICS 03.220.01; 35.240.60 Supersedes CEN ISO/TS 25110:2013
English Version

Electronic fee collection - Interface definition for on-board
account using integrated circuit card (ICC) (ISO
25110:2017)
Perception du télépéage - Définition d'interface pour Elektronische Gebührenerhebung -
compte de bord utilisant une carte à circuit intégré Schnittstellendefinition für die fahrzeugseitige
(ICC) (ISO 25110:2017) bordeigene Datenverwaltung mit Chipkarte (ICC) (ISO
25110:2017)
This European Standard was approved by CEN on 22 November 2017.

CEN members are bound to comply with the CEN/CENELEC Internal Regulations which stipulate the conditions for giving this
European Standard the status of a national standard without any alteration. Up-to-date lists and bibliographical references
concerning such national standards may be obtained on application to the CEN-CENELEC Management Centre or to any CEN
member.

This European Standard exists in three official versions (English, French, German). A version in any other language made by
translation under the responsibility of a CEN member into its own language and notified to the CEN-CENELEC Management
Centre has the same status as the official versions.

CEN members are the national standards bodies of Austria, Belgium, Bulgaria, Croatia, Cyprus, Czech Republic, Denmark, Estonia,
Finland, Former Yugoslav Republic of Macedonia, France, Germany, Greece, Hungary, Iceland, Ireland, Italy, Latvia, Lithuania,
Luxembourg, Malta, Netherlands, Norway, Poland, Portugal, Romania, Serbia, Slovakia, Slovenia, Spain, Sweden, Switzerland,
Turkey and United Kingdom.





EUROPEAN COMMITTEE FOR STANDARDIZATION
COMITÉ EUROPÉEN DE NORMALISATION

EUROPÄISCHES KOMITEE FÜR NORMUNG

CEN-CENELEC Management Centre: Rue de la Science 23, B-1040 Brussels
© 2017 CEN All rights of exploitation in any form and by any means reserved Ref. No. EN ISO 25110:2017 E
worldwide for CEN national Members.

---------------------- Page: 3 ----------------------

SIST EN ISO 25110:2018
EN ISO 25110:2017 (E)
Contents Page
European foreword . 3

2

---------------------- Page: 4 ----------------------

SIST EN ISO 25110:2018
EN ISO 25110:2017 (E)
European foreword
This document (EN ISO 25110:2017) has been prepared by Technical Committee ISO/TC 204
"Intelligent transport systems" in collaboration with Technical Committee CEN/TC 278 “Intelligent
transport systems” the secretariat of which is held by NEN.
This European Standard shall be given the status of a national standard, either by publication of an
identical text or by endorsement, at the latest by June 2018, and conflicting national standards shall be
withdrawn at the latest by June 2018.
Attention is drawn to the possibility that some of the elements of this document may be the subject of
patent rights. CEN shall not be held responsible for identifying any or all such patent rights.
This document supersedes CEN ISO/TS 25110:2013.
This document has been prepared under a mandate given to CEN by the European Commission and the
European Free Trade Association.
According to the CEN-CENELEC Internal Regulations, the national standards organizations of the
following countries are bound to implement this European Standard: Austria, Belgium, Bulgaria,
Croatia, Cyprus, Czech Republic, Denmark, Estonia, Finland, Former Yugoslav Republic of Macedonia,
France, Germany, Greece, Hungary, Iceland, Ireland, Italy, Latvia, Lithuania, Luxembourg, Malta,
Netherlands, Norway, Poland, Portugal, Romania, Serbia, Slovakia, Slovenia, Spain, Sweden, Switzerland,
Turkey and the United Kingdom.
Endorsement notice
The text of ISO 25110:2017 has been approved by CEN as EN ISO 25110:2017 without any modification.
...

Questions, Comments and Discussion

Ask us and Technical Secretary will try to provide an answer. You can facilitate discussion about the standard in here.

This May Also Interest You

SIST
SIST EN ISO 21177:2023(Main)
Intelligent transport systems - ITS station security services for secure session establishment and authentication between trusted devices (ISO 21177:2023)
EN ISO 21177:2023

This document contains specifications for a set of ITS station security services required to ensure the authenticity of the source and integrity of information exchanged between trusted entities, i.e.:
—    between devices operated as bounded secured managed entities, i.e. "ITS Station Communication Units" (ITS-SCU) and "ITS station units" (ITS-SU) as specified in ISO 21217; and
—    between ITS-SUs (composed of one or several ITS-SCUs) and external trusted entities such as sensor and control networks.
These services include the authentication and secure session establishment which are required to exchange information in a trusted and secure manner.
These services are essential for many intelligent transport system (ITS) applications and services including time-critical safety applications, automated driving, remote management of ITS stations (ISO 24102-2), and roadside/infrastructure-related services.

  • Standard
    114 pages
    English language
    sale 10% off
    e-Library read for
    1 day
  • Draft
    110 pages
    English language
    sale 10% off
    e-Library read for
    1 day
SIST
SIST-TS CEN/TS 17184:2023(Main)
Intelligent transport systems - eSafety - eCall High level application protocols (HLAP) using IP Multimedia Subsystem (IMS) over packet switched networks
CEN/TS 17184:2022

In respect of pan European eCall (operating requirements defined in EN 16072), this document defines the high level application protocols, procedures and processes required to provide the eCall service via a packet switched wireless communications network using IMS (IP Multimedia Subsystem) and wireless access (such as LTE, NR and their successors).
This document assumes support of eCall using IMS over packet switched networks by an IVS and a PSAP and further assumes that all PLMNs available to an IVS at the time an eCall or test eCall is initiated are packet switched networks. Support of eCall where eCall using IMS over packet switched networks is not supported by an IVS or PSAP is out of the scope of this document.
At some moment in time packet switched networks will be the only Public Land Mobile Networks (PLMN) available. However as long as GSM/UMTS PLMNs are available (Teleservice 12/TS12) ETSI TS 122 003 will remain operational. Both the use of such PLMNs and the logic behind choosing the appropriate network in a hybrid situation (where both packet-switched and circuit-switched networks are available) are out of scope of this document.
NOTE 1   The objective of implementing the pan-European in-vehicle emergency call system (eCall) is to automate the notification of a traffic accident, wherever in Europe, with the same technical standards and the same quality of services objectives by using a PLMN (such as ETSI prime medium) which supports the European harmonized 112/E112 emergency number (TS12 ETSI TS 122 003 or IMS packet switched network) and to provide a means of manually triggering the notification of an emergency incident.
NOTE 2   HLAP requirements for third party services supporting eCall can be found in EN 16102,. This document makes reference to those provisions but does not duplicate them.

  • Technical specification
    52 pages
    English language
    sale 10% off
    e-Library read for
    1 day
SIST
SIST-TS CEN ISO/TS 21184:2021(Main)
Cooperative intelligent transport systems (C-ITS) - Global transport data management (GTDM) framework (ISO/TS 21184:2021)
CEN ISO/TS 21184:2021

This document specifies a global transport data management (GTDM) framework composed of
— global transport basic data model,
— global transport access control data model,
— global transport function monitor data model, and
— sensor and control network data model
to support data exchange between applications.
This document defines standardized data classes in a Global Transport Data Format (GTDF), and the
means to manage them.
Application and role-based access control to resources in GTDF are specified in accordance with
IEEE 1609.2 certificates.
This document specifies GTDM as an ITS-S capability which is an optional feature (ITS-capabilities are
specified in ISO 24102-6).
The GT access control (GTAC) data model specifies access permissions to data and function control by
defining role-based mechanisms.
The GT function monitor (GTFM) data model specifies a configuration method to generate a flow logic
for monitoring purposes, e.g. observing data parameters with respect of a defined limit.

  • Technical specification
    124 pages
    English language
    sale 10% off
    e-Library read for
    1 day
SIST
SIST-TP CEN ISO/TR 21186-2:2021(Main)
Cooperative intelligent transport systems (C-ITS) - Guidelines on the usage of standards - Part 2: Hybrid communications
CEN ISO/TR 21186-2:2021

This document serves as a guideline explaining the concept of hybrid communications and support
functionalities for Cooperative ITS services deployed in conformance with the ITS station architecture
and related Cooperative ITS standards.

  • Technical report
    39 pages
    English language
    sale 10% off
    e-Library read for
    1 day
SIST
SIST-TP CEN ISO/TR 21186-3:2021(Main)
Cooperative intelligent transport systems (C-ITS) - Guidelines on the usage of standards - Part 3: Security (ISO/TR 21186-3:2021)
CEN ISO/TR 21186-3:2021

This document provides guidelines on security applicable in Intelligent Transport Systems (ITS) related
to communications and data access.
In particular, this document provides analyses and best practice content for secure ITS connectivity
using ISO/TS 21177.
This document analyses and identifies issues related to application security, access control, device
security and PKI for a secure ITS ecosystem.

  • Technical report
    135 pages
    English language
    sale 10% off
    e-Library read for
    1 day
SIST
SIST EN ISO 24014-1:2021(Main)
Public transport - Interoperable fare management system - Part 1: Architecture (ISO 24014-1:2021)
EN ISO 24014-1:2021

This document gives guidelines for the development of multi-operator/multi-service interoperable
public surface (including subways) transport fare management systems (IFMSs) on a national and
international level.
This document is applicable to bodies in public transport and related services which agree that their
systems need to interoperate.
This document defines a conceptual framework which is independent of organizational and physical
implementation. Any reference within this document to organizational or physical implementation is
purely informative.
This document defines a reference functional architecture for IFMSs and establishes the requirements
that are relevant for ensuring interoperability between several actors in the context of the use of
electronic tickets.
The IFMS includes all the functions involved in the fare management process, such as:
— management of media,
— management of applications,
— management of products,
— security management, and
— certification, registration, and identification.
This document defines the following main elements:
— identification of the different sets of functions in relation to the overall IFMS and services and media
from non-transport systems which interact with fare management systems;
— a generic model of an IFMS describing the logical and functional architecture and the interfaces
within the system, with other IFMSs and with services and media from non-transport systems;
— use cases describing the interactions and data flows between the different sets of functions;
— security requirements.
In its annexes, this document provides a framework for mobility platforms that integrate fare
management and travel information for inter- and multimodal travel (see Annex A). It also elaborates
on specific subjects covered in document and offers some national examples with regard to IFMS
implementations (see Annex B, Annex C, Annex D and Annex E).
This document does not define:
— the technical aspects of the interface between the medium and the medium access device;
— the data exchanges between the medium and the medium access device;
NOTE The data exchanges between the medium and the medium access device are proposed by other
standardization committees.
— the financial aspects of fare management systems (e.g. customer payments, method of payment,
settlement, apportionment, reconciliation).

  • Standard
    92 pages
    English language
    sale 10% off
    e-Library read for
    1 day
  • Draft
    85 pages
    English language
    sale 10% off
    e-Library read for
    1 day
SIST
SIST-TP CEN ISO/TR 21186-1:2021(Main)
Cooperative intelligent transport systems (C-ITS) - Guidelines on the usage of standards - Part 1: Standardization landscape and releases (ISO/TR 21186-1:2021)
CEN ISO/TR 21186-1:2021

This document
— describes standardization activities related to C-ITS on a global level by major standard development
organizations (SDOs);
— explains the various purposes of deliverables from SDOs and introduces a classification scheme of
such documents;
— describes methods on how C-ITS services are presented and performed;
— identifies an approach for C-ITS releases and exemplifies this approach;
— presents a list of standards (Bibliography) with special relevance for C-ITS.

  • Technical report
    33 pages
    English language
    sale 10% off
    e-Library read for
    1 day
SIST
SIST-TS CEN ISO/TS 21176:2020(Main)
Cooperative intelligent transport systems (C-ITS) - Position, velocity and time functionality in the ITS station (ISO/TS 21176:2020)
CEN ISO/TS 21176:2020

This document specifies a generic position, velocity and time (PVT) service. It further specifies
the PVT service within the ITS station (ITS-S) facilities layer (ISO 21217) and its interface to other
functionalities in an ITS-S such as:
— ITS-S application processes (ITS-S-APs), defined in ISO 21217;
— the generic facilities service handler (FSH) functionality of the ITS station facilities layer, defined in
ISO/TS 17429.
This document specifies:
— a PVT service which, dependent on a specific implementation, uses a variety of positioning-related
sources such as global navigation satellite systems (GNSSs, e.g. GALILEO, GLONASS and GPS),
roadside infrastructure, cellular infrastructure, kinematic state sensors, vision sensors;
— a PVT service which merges data from the above-mentioned positioning-related sources and
provides the PVT output parameters (carrying the PVT information) including the associated
quality (e.g. accuracy);
— how the PVT service is integrated as an ITS-S capability of the ITS station facilities layer;
— the interface function calls and responses (Service Access Point – service primitives) between the
PVT ITS-S capability and other functionalities of the ITS station architecture;
— optionally, the PVT service as a capability of the ITS-S facilities layer; see ISO 24102-6;
— an ASN.1 module C-itsPvt, providing ASN.1 type and value definitions (in Annex A);
— an implementation conformance statement proforma (in Annex B), as a basis for assessment of
conformity to this document.
NOTE It is outside the scope of this document to define the associated conformance evaluation test
procedures.

  • Technical specification
    37 pages
    English language
    sale 10% off
    e-Library read for
    1 day
SIST
SIST EN ISO 22418:2020(Main)
Intelligent transport systems - Fast service announcement protocol (FSAP) for general purposes in ITS (ISO 22418:2020)
EN ISO 22418:2020

This document specifies the fast service announcement protocol (FSAP) for general purposes in ITS.
It references and supports all features of ISO/TS 16460, especially supporting the service response
message (SRM) and related features in addition to the service announcement message (SAM), which
enables only very basic features.
FSAP supports locally advertised ITS services uniquely identified by an ITS application identifier
(ITS-AID).
This document specifies message formats and related basic protocol procedures by reference to
ISO/TS 16460, and further related protocol requirements for operation of FSAP in the context of an ITS
station specified in ISO 21217.
This document illustrates its relations to service announcement protocols specified by ETSI TC ITS
and IEEE.

  • Standard
    64 pages
    English language
    sale 10% off
    e-Library read for
    1 day
  • Draft
    65 pages
    English language
    sale 10% off
    e-Library read for
    1 day
SIST
SIST-TS CEN/TS 16614-1:2020(Main)
Public transport - Network and Timetable Exchange (NeTEx) - Part 1: Public transport network topology exchange format
CEN/TS 16614-1:2020

1.1   General
NeTEx is dedicated to the exchange of scheduled data (network, timetable and fare information). It is based on Transmodel V6 (EN 12896 series) and SIRI (CEN/TS 15531-4/-5 and EN 15531-1/-2/-3) and supports the exchange of information of relevance for passenger information about public transport services and also for running Automated Vehicle Monitoring Systems (AVMS).
NOTE   Many NeTEx concepts are taken directly from Transmodel; the definitions and explanation of these concepts are extracted directly from the respective standard and reused in NeTEx, sometimes with adaptions in order to fit the NeTEx context.
Although the data exchanges targeted by NeTEx are predominantly oriented towards provisioning passenger information systems and AVMS with data from transit scheduling systems, it is not restricted to this purpose and NeTEx can also provide an effective solution to many other use cases for transport data exchange.
1.2   Transport modes
All mass public transport modes are taken into account by NeTEx, including train, bus, coach, metro, tramway, ferry, and their submodes. It is possible to describe airports and air journeys, but there has not been any specific consideration of any additional requirements that apply specifically to air transport.
1.3   Compatibility with existing standards and recommendations
Concepts covered in NeTEx that relate in particular to long-distance train travel include; rail operators and related organizations; stations and related equipment; journey coupling and journey parts; train composition and facilities; planned passing times; timetable versions and validity conditions.
In the case of long distance train the NeTEx takes into account the requirements formulated by the ERA (European Rail Agency) - TAP/TSI (Telematics Applications for Passenger/ Technical Specification for Interoperability, entered into force on 13 May 2011 as the Commission Regulation (EU) No 454/2011), based on UIC directives.
As regards the other exchange protocols, a formal compatibility is ensured with TransXChange (UK), VDV 452 (Germany), NEPTUNE (France), UIC Leaflet, BISON (The Netherlands) and NOPTIS (Nordic Public Transport Interface Standard).
The data exchange is possible either through dedicated web services, through data file exchanges, or using the SIRI exchange protocol as described in part 2 of the SIRI documentation.

  • Technical specification
    1078 pages
    English language
    sale 10% off
    e-Library read for
    1 day