SIST EN 300 113-2 V1.4.1:2007
Electromagnetic compatibility and Radio spectrum Matters (ERM) - Land mobile service; Radio equipment intended for the transmission of data (and/or speech) using constant or non-constant envelope modulation and having an antenna connector - Part 2: Harmonized EN covering essential requirements of article 3.2 of the R&TTE Directive
- Abstract
The present document covers the technical requirements for radio transmitters and receivers used in stations in the Private Mobile Radio (PMR) service. It applies to use in the land mobile service, operating on radio frequencies in all or in any part of the frequencies as given below, with channel separations of 12,5 kHz, 20 kHz and 25 kHz, intended for speech and/or data.It applies to equipment for continuous and/or discontinuous transmission of data and/or digital speech.
The equipment comprises a transmitter and associated encoder and modulator and/or a receiver and associated demodulator and decoder. The types of equipment covered by the present document are as follows:
- base station (equipment fitted with an antenna connector, intended for use in a fixed location);
- mobile station (equipment fitted with an antenna connector, normally used in a vehicle or as a transportable);
- and those hand portable stations:
a) fitted with an antenna socket; or
b) without an external antenna socket, but fitted with a permanent internal or a temporary internal 50 Ω Radio Frequency (RF) connector which allows access to the transmitter output and the receiver input. Hand portable equipment without an external or internal RF connector and without the possibility of having a temporary internal 50 Ω RF connector is not covered by the present document. The present document is intended to cover the provisions of article 3.2 of Directive 1999/5/EC (R&TTE Directive) [1], which states that "(...) radio equipment shall be so constructed that it effectively uses the spectrum allocated to terrestrial/space radiocommunications and orbital resources so as to avoid harmful interference". In addition to the present document, other ENs that specify technical requirements in respect of essential requirements under other parts of article 3 of the R&TTE Directive [1] may apply to equipment within the scope of the present document.
- Status
- Published
- Publication Date
- 05-Nov-2007
- Technical Committee
- MOC - Mobile Communications
- Current Stage
- 6060 - National Implementation/Publication (Adopted Project)
- Start Date
- 25-Oct-2007
- Due Date
- 30-Dec-2007
- Completion Date
- 06-Nov-2007
- Mandate
- M/284
SIST EN 300 113-2 V1.4.1:2007 is the SIST adoption of ETSI EN 300 113-2 V1.4.1, a Harmonized European Standard for land mobile service radio equipment used in Private Mobile Radio (PMR) stations. It specifies the radio performance requirements and compliance test routes that support Article 3.2 of the R&TTE Directive for transmitters and receivers intended for speech and/or data and fitted with an antenna connector. It is written for manufacturers, test laboratories, and conformity teams that need to check whether a base station, mobile station, or qualifying hand portable station meets the essential radio spectrum requirements.
What does SIST EN 300 113-2 V1.4.1:2007 specify?
SIST EN 300 113-2 V1.4.1:2007 covers technical requirements for radio transmitters and receivers used in PMR stations within the land mobile service. It applies to equipment used for continuous or discontinuous transmission of data and/or digital speech, and to base stations, mobile stations, and certain hand portable stations with an antenna socket or internal RF access for testing.
The document is organized into five clauses and three annexes. Clause 1 sets the scope, Clause 2 lists references, Clause 3 covers definitions, symbols and abbreviations, Clause 4 gives the technical requirements, and Clause 5 gives the test and compliance approach.
| Annex | What it covers |
|---|---|
| Annex A | HS Requirements and conformance Test specifications Table (HS-RTT), linking each requirement to a test route and marking it as unconditional or conditional, and essential or other |
| Annex B | The EN title in the official languages |
| Annex C | Bibliography |
The scope excludes hand portable equipment that has no external antenna socket, no internal RF connector, and no possibility of a temporary internal RF connector. Clause 1 also notes that other ENs may apply for other essential requirements under Article 3 of the R&TTE Directive.
What are the key requirements of SIST EN 300 113-2 V1.4.1:2007?
SIST EN 300 113-2 V1.4.1:2007 is mainly a conformance standard: it points to the detailed technical definitions and limit values in ETSI EN 300 113-1, then tells you which measurements to use to show compliance. In practice, the document is about proving that the equipment uses spectrum cleanly, does not interfere with nearby channels, and behaves predictably under declared operating conditions.
Transmitter requirements
Clause 4.1 requires the equipment to meet the technical requirements across the manufacturer’s declared operational environmental profile. That means compliance is not limited to a single laboratory condition - the declared operating range matters for the final conformity claim.
Clauses 4.2.1 to 4.2.7 cover the main transmitter characteristics: frequency error, transmitter power (conducted), maximum effective radiated power, adjacent and alternate channel power, unwanted emissions in the spurious domain, intermodulation attenuation, and transient frequency behaviour. These are the core spectrum-sharing checks, because they control where the transmitter energy goes and how stable the carrier remains when the radio turns on, transmits, or changes state.
Clause 4.2.1 adds a specific conformance condition for frequency error when adjacent and alternate channel power has not already been measured under extreme test conditions. In practice, the test plan has to show that frequency accuracy has been checked in the right environmental state.
Clause 4.2.8 defines the transmitter timeout timer as a call-duration timer that stops transmission when the allowed time expires and requires PTT to be released and pressed again before retransmission. This is a declared function, so the manufacturer has to state the applicable limit and show that the timer behaves as claimed.
Receiver requirements
Clauses 4.3.1 to 4.3.7 cover receiver performance: maximum usable receiver sensitivity, co-channel rejection, adjacent channel selectivity, spurious response rejection, intermodulation response rejection, blocking or desensitization, and spurious radiations. In practical terms, these requirements show whether the receiver can hear the wanted signal while rejecting strong neighbours, unwanted products, and self-generated emissions.
For duplex equipment, Clause 4.3.1 adds receiver desensitization, and Clause 4.3.4 adds a duplex-specific spurious response rejection basis. That matters because simultaneous transmit-and-receive operation can make the receiver more vulnerable to overload from the transmitter path.
Testing and evidence
Clause 5.1 requires tests to be carried out at representative points within the declared environmental profile, and under normal and extreme test conditions where stated. This means the test setup must reflect the actual operating envelope that the manufacturer declares.
Clause 5.2 requires the test report to include measurement uncertainty, and the uncertainty calculation method comes from TR 100 028. In practice, the lab has to show both the measured result and its uncertainty, because the conformity decision depends on that recorded evidence.
Clauses 5.3 and 5.4 split the work into the Essential Radio Test Suite and the Other Test Suite. The essential suite covers transmitter frequency error, power, maximum effective radiated power, channel power, spurious emissions, intermodulation attenuation, transient frequency behaviour, and receiver spurious radiations; the other suite covers receiver sensitivity and rejection-type tests, especially for equipment using listen-before-transmit.
Annex A is important because it links each essential requirement to its test specification and marks whether the requirement is unconditional or conditional. For a buyer or engineer, that table is the quickest way to see which functions are in scope for a given product variant.
What terms does SIST EN 300 113-2 V1.4.1:2007 define?
- Private Mobile Radio (PMR) - the service context targeted by the standard, covering land mobile radio stations used for speech and/or data.
- R&TTE Directive - the EU directive whose Article 3.2 essential requirement this standard supports.
- Hand portable station - a portable radio type covered only when it has the antenna access arrangements described in the scope.
- Duplex equipment - equipment that transmits and receives at the same time, with extra receiver checks in this standard.
- Listen-before-transmit - an operating mode referenced in Annex A for some receiver tests and conditional requirements.
- Transmitter timeout timer - a call-duration timer that stops transmission when the permitted transmit time ends.
- HS-RTT - the Annex A table that maps each requirement to its test specification and its conditionality.
- PTT - the key used to start transmission for the transmitter timeout timer function.
Who uses SIST EN 300 113-2 V1.4.1:2007?
Manufacturers of PMR base stations, mobile stations, and qualifying hand portable stations use this standard when designing the transmitter and receiver sections and when preparing the technical file. Test laboratories use it to choose the correct radio test suites, environmental conditions, and uncertainty reporting method.
Quality managers, conformity assessment teams, and buyers use it to check whether a radio product is covered by the standard and which functions are conditional, such as duplex operation, listen-before-transmit, or a transmitter timeout timer. It is also relevant to engineers preparing a presumption-of-conformity case under Article 3.2 of the R&TTE Directive.
Which standards are used with SIST EN 300 113-2 V1.4.1:2007?
- ETSI EN 300 113-1 - the technical companion part. It provides the detailed definitions, symbols, abbreviations, limit clauses, and measurement methods that Part 2 cites throughout.
- Directive 1999/5/EC - the R&TTE Directive. It provides the essential requirement that radio equipment shall use spectrum effectively and avoid harmful interference.
- ETSI TR 100 028 - the uncertainty guide. Clause 5.2 uses it for calculating measurement uncertainty in test reports.
- ETSI EG 201 399 - the ETSI guide to the modular structure for candidate Harmonized Standards under the R&TTE Directive.
What does the SIST EN 300 113-2 V1.4.1:2007 document contain?
SIST EN 300 113-2 V1.4.1:2007 contains the scope, references, definitions framework, technical requirements, and compliance testing structure for PMR radio equipment. Clause 4 presents each transmitter and receiver requirement in a definition-limit-conformance format, while Clause 5 sets the environmental conditions, test power source, sample choice, and interpretation of measurement results.
Annex A is the main compliance cross-reference table for the standard. It shows which requirements are essential, which are conditional, and which test specifications are essential or other. Annex B gives the title in multiple official languages, and Annex C lists the bibliography used by the document.
Relations
- Effective Date
- 17-Nov-2009
Get Certified
Connect with accredited certification bodies for this standard
ANCE
Mexican certification and testing association.
Intertek Slovenia
Intertek testing, inspection, and certification services in Slovenia.
LNE (Laboratoire National de Métrologie et d'Essais)
French national laboratory for metrology and testing.
Sponsored listings
Frequently Asked Questions
SIST EN 300 113-2 V1.4.1:2007 is a standard published by the Slovenian Institute for Standardization (SIST). Its full title is "Electromagnetic compatibility and Radio spectrum Matters (ERM) - Land mobile service; Radio equipment intended for the transmission of data (and/or speech) using constant or non-constant envelope modulation and having an antenna connector - Part 2: Harmonized EN covering essential requirements of article 3.2 of the R&TTE Directive". This standard covers: The present document covers the technical requirements for radio transmitters and receivers used in stations in the Private Mobile Radio (PMR) service. It applies to use in the land mobile service, operating on radio frequencies in all or in any part of the frequencies as given below, with channel separations of 12,5 kHz, 20 kHz and 25 kHz, intended for speech and/or data.It applies to equipment for continuous and/or discontinuous transmission of data and/or digital speech. The equipment comprises a transmitter and associated encoder and modulator and/or a receiver and associated demodulator and decoder. The types of equipment covered by the present document are as follows: - base station (equipment fitted with an antenna connector, intended for use in a fixed location); - mobile station (equipment fitted with an antenna connector, normally used in a vehicle or as a transportable); - and those hand portable stations: a) fitted with an antenna socket; or b) without an external antenna socket, but fitted with a permanent internal or a temporary internal 50 Ω Radio Frequency (RF) connector which allows access to the transmitter output and the receiver input. Hand portable equipment without an external or internal RF connector and without the possibility of having a temporary internal 50 Ω RF connector is not covered by the present document. The present document is intended to cover the provisions of article 3.2 of Directive 1999/5/EC (R&TTE Directive) [1], which states that "(...) radio equipment shall be so constructed that it effectively uses the spectrum allocated to terrestrial/space radiocommunications and orbital resources so as to avoid harmful interference". In addition to the present document, other ENs that specify technical requirements in respect of essential requirements under other parts of article 3 of the R&TTE Directive [1] may apply to equipment within the scope of the present document.
The present document covers the technical requirements for radio transmitters and receivers used in stations in the Private Mobile Radio (PMR) service. It applies to use in the land mobile service, operating on radio frequencies in all or in any part of the frequencies as given below, with channel separations of 12,5 kHz, 20 kHz and 25 kHz, intended for speech and/or data.It applies to equipment for continuous and/or discontinuous transmission of data and/or digital speech. The equipment comprises a transmitter and associated encoder and modulator and/or a receiver and associated demodulator and decoder. The types of equipment covered by the present document are as follows: - base station (equipment fitted with an antenna connector, intended for use in a fixed location); - mobile station (equipment fitted with an antenna connector, normally used in a vehicle or as a transportable); - and those hand portable stations: a) fitted with an antenna socket; or b) without an external antenna socket, but fitted with a permanent internal or a temporary internal 50 Ω Radio Frequency (RF) connector which allows access to the transmitter output and the receiver input. Hand portable equipment without an external or internal RF connector and without the possibility of having a temporary internal 50 Ω RF connector is not covered by the present document. The present document is intended to cover the provisions of article 3.2 of Directive 1999/5/EC (R&TTE Directive) [1], which states that "(...) radio equipment shall be so constructed that it effectively uses the spectrum allocated to terrestrial/space radiocommunications and orbital resources so as to avoid harmful interference". In addition to the present document, other ENs that specify technical requirements in respect of essential requirements under other parts of article 3 of the R&TTE Directive [1] may apply to equipment within the scope of the present document.
SIST EN 300 113-2 V1.4.1:2007 is classified under the following ICS (International Classification for Standards) categories: 33.060.99 - Other equipment for radiocommunications; 33.070.01 - Mobile services in general; 33.100.01 - Electromagnetic compatibility in general. The ICS classification helps identify the subject area and facilitates finding related standards.
SIST EN 300 113-2 V1.4.1:2007 has the following relationships with other standards: It is inter standard links to SIST EN 300 113-2 V1.3.1:2004. Understanding these relationships helps ensure you are using the most current and applicable version of the standard.
SIST EN 300 113-2 V1.4.1:2007 is associated with the following European legislation: EU Directives/Regulations: 1999/5/EC; Standardization Mandates: M/284. When a standard is cited in the Official Journal of the European Union, products manufactured in conformity with it benefit from a presumption of conformity with the essential requirements of the corresponding EU directive or regulation.
SIST EN 300 113-2 V1.4.1:2007 is available in PDF format for immediate download after purchase. The document can be added to your cart and obtained through the secure checkout process. Digital delivery ensures instant access to the complete standard document.
Standards Content (Sample)
SLOVENSKI STANDARD
01-december-2007
(OHNWURPDJQHWQD]GUXåOMLYRVWLQ]DGHYHY]YH]L]UDGLMVNLPVSHNWURP (50
6WRULWHYNRSHQVNLKPRELOQLKNRPXQLNDFLM5DGLMVNDRSUHPD]DSUHQRVSRGDWNRY
R]LURPDJRYRUD NLXSRUDEOMDPRGXODFLMRVNRQVWDQWQRDOLQHNRQVWDQWQRRYRMQLFR
LQLPDDQWHQVNLSULNOMXþHNGHO +DUPRQL]LUDQL(1NL]DMHPDELVWYHQH]DKWHYH
þOHQDGLUHNWLYH5 77(
Electromagnetic compatibility and Radio spectrum Matters (ERM) - Land mobile service;
Radio equipment intended for the transmission of data (and/or speech) using constant or
non-constant envelope modulation and having an antenna connector - Part 2:
Harmonized EN covering essential requirements of article 3.2 of the R&TTE Directive
Ta slovenski standard je istoveten z: EN 300 113-2 Version 1.4.1
ICS:
33.060.99 Druga oprema za radijske Other equipment for
komunikacije radiocommunications
33.070.01 Mobilni servisi na splošno Mobile services in general
33.100.01 Elektromagnetna združljivost Electromagnetic compatibility
na splošno in general
2003-01.Slovenski inštitut za standardizacijo. Razmnoževanje celote ali delov tega standarda ni dovoljeno.
Harmonized European Standard (Telecommunications series)
Electromagnetic compatibility
and Radio spectrum Matters (ERM);
Land mobile service;
Radio equipment intended for the transmission
of data (and/or speech) using constant or non-constant
envelope modulation and having an antenna connector;
Part 2: Harmonized EN covering essential requirements
of article 3.2 of the R&TTE Directive
2 ETSI EN 300 113-2 V1.4.1 (2007-07)
Reference
REN/ERM-TGDMR-062-2
Keywords
antenna, data, mobile, radio, regulation, speech,
PMR, TDD, TDMA
ETSI
650 Route des Lucioles
F-06921 Sophia Antipolis Cedex - FRANCE
Tel.: +33 4 92 94 42 00 Fax: +33 4 93 65 47 16
Siret N° 348 623 562 00017 - NAF 742 C
Association à but non lucratif enregistrée à la
Sous-Préfecture de Grasse (06) N° 7803/88
Important notice
Individual copies of the present document can be downloaded from:
http://www.etsi.org
The present document may be made available in more than one electronic version or in print. In any case of existing or
perceived difference in contents between such versions, the reference version is the Portable Document Format (PDF).
In case of dispute, the reference shall be the printing on ETSI printers of the PDF version kept on a specific network drive
within ETSI Secretariat.
Users of the present document should be aware that the document may be subject to revision or change of status.
Information on the current status of this and other ETSI documents is available at
http://portal.etsi.org/tb/status/status.asp
If you find errors in the present document, please send your comment to one of the following services:
http://portal.etsi.org/chaircor/ETSI_support.asp
Copyright Notification
No part may be reproduced except as authorized by written permission.
The copyright and the foregoing restriction extend to reproduction in all media.
© European Telecommunications Standards Institute 2007.
All rights reserved.
TM TM TM
DECT , PLUGTESTS and UMTS are Trade Marks of ETSI registered for the benefit of its Members.
TM
TIPHON and the TIPHON logo are Trade Marks currently being registered by ETSI for the benefit of its Members.
TM
3GPP is a Trade Mark of ETSI registered for the benefit of its Members and of the 3GPP Organizational Partners.
ETSI
3 ETSI EN 300 113-2 V1.4.1 (2007-07)
Contents
Intellectual Property Rights.5
Foreword.5
Introduction .5
1 Scope.6
2 References.6
3 Definitions, symbols and abbreviations .7
3.1 Definitions.7
3.2 Symbols.7
3.3 Abbreviations.7
4 Technical requirements specifications .7
4.1 Environmental profile.7
4.2 Transmitter requirements.7
4.2.1 Frequency error.7
4.2.1.1 Definition.7
4.2.1.2 Limit.7
4.2.1.3 Conformance.8
4.2.2 Transmitter power (conducted).8
4.2.2.1 Definition.8
4.2.2.2 Limit.8
4.2.2.3 Conformance.8
4.2.3 Maximum effective radiated power .8
4.2.3.1 Definition.8
4.2.3.2 Limit.8
4.2.3.3 Conformance.8
4.2.4 Adjacent and alternate channel power .8
4.2.4.1 Definition.8
4.2.4.2 Limit.8
4.2.4.3 Conformance.8
4.2.5 Unwanted emissions in the spurious domain.8
4.2.5.1 Definition.8
4.2.5.2 Limit.8
4.2.5.3 Conformance.9
4.2.6 Intermodulation attenuation.9
4.2.6.1 Definition.9
4.2.6.2 Limit.9
4.2.6.3 Conformance.9
4.2.7 Transient frequency behaviour of the transmitter .9
4.2.7.1 Definition.9
4.2.7.2 Limit.9
4.2.7.3 Conformance.9
4.2.8 Transmitter timeout timer .9
4.2.8.1 Definition.9
4.2.8.2 Limit.9
4.2.8.3 Conformance.9
4.3 Receiver requirements.10
4.3.1 Maximum usable receiver sensitivity .10
4.3.1.1 Definition.10
4.3.1.2 Limit.10
4.3.1.3 Conformance.10
4.3.2 Co-channel rejection.10
4.3.2.1 Definition.10
4.3.2.2 Limit.10
4.3.2.3 Conformance.10
4.3.3 Adjacent channel selectivity .10
ETSI
4 ETSI EN 300 113-2 V1.4.1 (2007-07)
4.3.3.1 Definition.10
4.3.3.2 Limit.10
4.3.3.3 Conformance.10
4.3.4 Spurious response rejection .11
4.3.4.1 Definition.11
4.3.4.2 Limit.11
4.3.4.3 Conformance.11
4.3.5 Intermodulation response rejection.11
4.3.5.1 Definition.11
4.3.5.2 Limit.11
4.3.5.3 Conformance.11
4.3.6 Blocking or desensitization.11
4.3.6.1 Definition.11
4.3.6.2 Limit.11
4.3.6.3 Conformance.11
4.3.7 Spurious radiations.11
4.3.7.1 Definition.11
4.3.7.2 Limit.12
4.3.7.3 Conformance.12
5 Testing for compliance with technical requirements.12
5.1 Environmental conditions for testing .12
5.1.1 Normal and extreme test-conditions .12
5.1.2 Test power source .12
5.1.3 Choice of samples for test suites.12
5.2 Interpretation of the measurement results .12
5.3 Essential radio test suites.13
5.3.1 Frequency error.13
5.3.2 Transmitter power (conducted).13
5.3.3 Maximum effective radiated power .13
5.3.4 Adjacent and alternate channel power .13
5.3.5 Unwanted emissions in the spurious domain.13
5.3.6 Intermodulation attenuation.13
5.3.7 Transient frequency behaviour of the transmitter .13
5.3.8 Receiver Spurious radiations .13
5.4 Other radio test suites .13
5.4.1 Maximum usable receiver sensitivity.13
5.4.2 Co-channel rejection.13
5.4.3 Adjacent channel selectivity .14
5.4.4 Spurious response rejection .14
5.4.5 Intermodulation response rejection.14
5.4.6 Receiver blocking or desensitization .14
Annex A (normative): HS Requirements and conformance Test specifications Table (HS-
RTT).15
Annex B (informative): The EN title in the official languages .17
Annex C (informative): Bibliography.19
History .20
ETSI
5 ETSI EN 300 113-2 V1.4.1 (2007-07)
Intellectual Property Rights
IPRs essential or potentially essential to the present document may have been declared to ETSI. The information
pertaining to these essential IPRs, if any, is publicly available for ETSI members and non-members, and can be found
in ETSI SR 000 314: "Intellectual Property Rights (IPRs); Essential, or potentially Essential, IPRs notified to ETSI in
respect of ETSI standards", which is available from the ETSI Secretariat. Latest updates are available on the ETSI Web
server (http://webapp.etsi.org/IPR/home.asp).
Pursuant to the ETSI IPR Policy, no investigation, including IPR searches, has been carried out by ETSI. No guarantee
can be given as to the existence of other IPRs not referenced in ETSI SR 000 314 (or the updates on the ETSI Web
server) which are, or may be, or may become, essential to the present document.
Foreword
This Harmonized European Standard (Telecommunications series) has been produced by ETSI Technical Committee
Electromagnetic compatibility and Radio spectrum Matters (ERM).
The present document has been produced by ETSI in response to a mandate from the European Commission issued
under Council Directive 98/34/EC [3] (as amended) laying down a procedure for the provision of information in the
field of technical standards and regulations.
The present document is intended to become a Harmonized Standard, the reference of which will be published in the
Official Journal of the European Communities referencing the Directive 1999/5/EC [1] of the European Parliament and
of the Council of 9 March 1999 on radio equipment and telecommunications terminal equipment and the mutual
recognition of their conformity ("the R&TTE Directive").
Technical specifications relevant to Directive 1999/5/EC are given in annex A.
The present document is part 2 of a multi-part deliverable covering the Electromagnetic compatibility and Radio
spectrum Matters (ERM); Land mobile service; Radio equipment intended for the transmission of data (and/or speech)
using constant or non-constant envelope modulation and having an antenna connector, as identified below:
Part 1: "Technical characteristics and methods of measurement";
Part 2: "Harmonized EN covering essential requirements of article 3.2 of the R&TTE Directive".
National transposition dates
Date of adoption of this EN: 29 June 2007
Date of latest announcement of this EN (doa): 30 September 2007
Date of latest publication of new National Standard
or endorsement of this EN (dop/e): 31 March 2008
Date of withdrawal of any conflicting National Standard (dow): 31 March 2009
Introduction
The present document is part of a set of standards developed by ETSI and is designed to fit in a modular structure to
cover all radio and telecommunications terminal equipment within the scope of the R&TTE Directive. The modular
structure is shown in EG 201 399 (see bibliography).
ETSI
6 ETSI EN 300 113-2 V1.4.1 (2007-07)
1 Scope
The present document covers the technical requirements for radio transmitters and receivers used in stations in the
Private Mobile Radio (PMR) service.
It applies to use in the land mobile service, operating on radio frequencies in all or in any part of the frequencies as
given below, with channel separations of 12,5 kHz, 20 kHz and 25 kHz, intended for speech and/or data.
Table 1: Radiocommunications service frequency bands
Radiocommunications service frequency bands
Transmit 30 MHz to 1 000 MHz
Receive 30 MHz to 1 000 MHz
It applies to equipment for continuous and/or discontinuous transmission of data and/or digital speech.
The equipment comprises a transmitter and associated encoder and modulator and/or a receiver and associated
demodulator and decoder. The types of equipment covered by the present document are as follows:
• base station (equipment fitted with an antenna connector, intended for use in a fixed location);
• mobile station (equipment fitted with an antenna connector, normally used in a vehicle or as a transportable);
• and those hand portable stations:
a) fitted with an antenna socket; or
b) without an external antenna socket, but fitted with a permanent internal or a temporary internal 50 Ω
Radio Frequency (RF) connector which allows access to the transmitter output and the receiver input.
Hand portable equipment without an external or internal RF connector and without the possibility of having a temporary
internal 50 Ω RF connector is not covered by the present document.
The present document is intended to cover the provisions of article 3.2 of Directive 1999/5/EC (R&TTE Directive) [1],
which states that "(.) radio equipment shall be so constructed that it effectively uses the spectrum allocated to
terrestrial/space radiocommunications and orbital resources so as to avoid harmful interference".
In addition to the present document, other ENs that specify technical requirements in respect of essential requirements
under other parts of article 3 of the R&TTE Directive [1] may apply to equipment within the scope of the present
document.
2 References
The following documents contain provisions which, through reference in this text, constitute provisions of the present
document.
• References are either specific (identified by date of publication and/or edition number or version number) or
non-specific.
• For a specific reference, subsequent revisions do not apply.
• For a non-specific reference, the latest version applies.
Referenced documents which are not found to be publicly available in the expected location might be found at
http://docbox.etsi.org/Reference.
NOTE: While any hyperlinks included in this clause were valid at the time of publication ETSI cannot guarantee
their long term validity.
ETSI
7 ETSI EN 300 113-2 V1.4.1 (2007-07)
[1] Directive 1999/5/EC of the European Parliament and of the Council of 9 March 1999 on radio
equipment and telecommunications terminal equipment and the mutual recognition of their
conformity (R&TTE Directive).
[2] ETSI EN 300 113-1 (V1.6.1): "Electromagnetic compatibility and Radio spectrum Matters (ERM);
Land mobile service; Radio equipment intended for the transmission of data (and/or speech) using
constant or non-constant envelope modulation and having an antenna connector; Part 1: Technical
characteristics and methods of measurement".
[3] Directive 98/34/EC of the European Parliament and of the Council of 22 June 1998 laying down a
procedure for the provision of information in the field of technical standards and regulations and of
rules on information society services.
3 Definitions, symbols and abbreviations
3.1 Definitions
For the purposes of the present document, the terms and definitions given in the R&TTE Directive [1] and
EN 300 113-1 [2] apply.
3.2 Symbols
For the purposes of the present document, the symbols given in EN 300 113-1 [2] apply.
3.3 Abbreviations
For the purposes of the present document, the abbreviations given in EN 300 113-1 [2] apply.
4 Technical requirements specifications
4.1 Environmental profile
The technical requirements of the present document apply under the environmental profile for operation of the
equipment, which shall be declared by the manufacturer of the equipment. T
...