SIST EN 301 357-2:2002

SLOVENSKI STANDARD
01-november-2002
(OHNWURPDJQHWQD]GUXåOMLYRVW(0&LQ]DGHYHY]YH]L]UDGLMVNLPVSHNWURP(50
%UH]YUYLþQHDYGLRQDSUDYHGHOXMRþHYREPRþMXRG0+]GR0+]
3RWURãQLãNLUDGLRPLNURIRQLLQVOXãQRPRQLWRUQLVLVWHPL&(37NLGHOXMHMRY
KDUPRQL]LUDQHPREPRþMXRG0+]GR0+]GHO+DUPRQL]LUDQL(1NL
]DMHPDþOHQGLUHNWLYH5 77(
Electromagnetic compatibility and Radio spectrum Matters (ERM); Cordless audio
devices in the range 25 MHz to 2 000 MHz; Consumer radio microphones and in-ear
monitoring systems operating in the CEPT harmonized band 863 MHz to 865 MHz; Part
2: Harmonized EN under article 3.2 of the R&TTE Directive
Ta slovenski standard je istoveten z: EN 301 357-2 Version 1.2.1
ICS:
33.060.99 Druga oprema za radijske Other equipment for
komunikacije radiocommunications
33.100.01 Elektromagnetna združljivost Electromagnetic compatibility
na splošno in general
2003-01.Slovenski inštitut za standardizacijo. Razmnoževanje celote ali delov tega standarda ni dovoljeno.

ETSI EN 301 357-2 V1.2.1 (2001-06)
Candidate Harmonized European Standard (Telecommunications series)
Electromagnetic compatibility
and Radio spectrum Matters (ERM);
Cordless audio devices in the range 25 MHz to 2 000 MHz;
Consumer radio microphones and in-ear monitoring
systems operating in the CEPT harmonized
band 863 MHz to 865 MHz;
Part 2: Harmonized EN under article 3.2
of the R&TTE Directive
2 ETSI EN 301 357-2 V1.2.1 (2001-06)
Reference
REN/ERM-RP08-0309-4
Keywords
audio, radio, radio mic, regulation, testing
ETSI
650 Route des Lucioles
F-06921 Sophia Antipolis Cedex - FRANCE
Tel.: +33492 94 4200 Fax: +33493 65 4716
Siret N° 348 623 562 00017 - NAF 742 C
Association à but non lucratif enregistrée à la
Sous-Préfecture de Grasse (06) N° 7803/88
Important notice
Individual copies of the present document can be downloaded from:
http://www.etsi.org
The present document may be made available in more than one electronic version or in print. In any case of existing or
perceived difference in contents between such versions, the reference version is the Portable Document Format (PDF).
In case of dispute, the reference shall be the printing on ETSI printers of the PDF version kept on a specific network drive
within ETSI Secretariat.
Users of the present document should be aware that the document may be subject to revision or change of status.
Information on the current status of this and other ETSI documents is available at http://www.etsi.org/tb/status/
If you find errors in the present document, send your comment to:
editor@etsi.fr
Copyright Notification
No part may be reproduced except as authorized by written permission.
The copyright and the foregoing restriction extend to reproduction in all media.
© European Telecommunications Standards Institute 2001.
All rights reserved.
ETSI
3 ETSI EN 301 357-2 V1.2.1 (2001-06)
Contents
Intellectual Property Rights .4
Foreword.4
Introduction.5
1 Scope.7
2 References.7
3 Definitions, symbols and abbreviations .8
3.1 Definitions . 8
3.2 Symbols . 8
3.3 Abbreviations. 8
4 Functional characteristics.8
4.1 Controls . 8
4.2 Marking . 8
4.3 Transmitter requirements. 8
4.3.1 Frequency error. 8
4.3.2 Carrier power. 9
4.3.3 Channel bandwidth . 9
4.3.4 Spurious emissions. 9
4.4 Receiver requirements. 9
4.4.1 Spurious emissions. 9
5 Testing for compliance with technical requirements .9
5.1 Essential radio test suites . 9
5.1.1 Environmental conditions for testing . 9
5.1.1.1 Normal and extreme test-conditions . 9
5.1.1.2 Test power source. 9
5.1.2 Choice of samples for test suites. 9
5.1.3 Transmitter test suites . 9
5.1.3.1 Frequency error . 9
5.1.3.2 Carrier power . 9
5.1.3.3 Channel bandwidth. 10
5.1.3.4 Spurious emissions . 10
5.1.4 Receiver test suites. 10
5.1.4.1 Spurious emissions . 10
6 Interpretation of the measurement results .10
History .11
ETSI
4 ETSI EN 301 357-2 V1.2.1 (2001-06)
Intellectual Property Rights
IPRs essential or potentially essential to the present document may have been declared to ETSI. The information
pertaining to these essential IPRs, if any, is publicly available for ETSI members and non-members, and can be found
in ETSI SR 000 314: "Intellectual Property Rights (IPRs); Essential, or potentially Essential, IPRs notified to ETSI in
respect of ETSI standards", which is available from the ETSI Secretariat. Latest updates are available on the ETSI Web
server (http://www.etsi.org/ipr).
Pursuant to the ETSI IPR Policy, no investigation, including IPR searches, has been carried out by ETSI. No guarantee
can be given as to the existence of other IPRs not referenced in ETSI SR 000 314 (or the updates on the ETSI Web
server) which are, or may be, or may become, essential to the present document.
Foreword
This Candidate Harmonized European Standard (Telecommunications series) has been produced by ETSI Technical
Committee Electromagnetic compatibility and Radio spectrum Matters (ERM).
The present document has been produced by ETSI in response to a mandate from the European Commission issued
under Council Directive 98/34/EC [5] laying down a procedure for the provision of information in the field of technical
standards and regulations.
The present document is intended to become a Harmonized Standard, the reference of which will be published in the
Official Journal of the European Communities referencing the Directive 1999/5/EC [1] of the European Parliament and
of the Council of 9 March 1999 on radio equipment and telecommunications terminal equipment and the mutual
recognition of their conformity ("the R&TTE Directive").
The present document is part 2 of a multi-part deliverable covering Cordless audio devices in the range 25 MHz to
2 000 MHz, Consumer radio microphones and in ear monitoring devices in the CEPT harmonized band 863-865 MHz,
as identified below:
Part 1: "Technical characteristics and test methods";
Part 2: "Harmonized EN under article 3.2 of the R&TTE Directive".
National transposition dates
Date of adoption of this EN: 15 June 2001
Date of latest announcement of this EN (doa): 30 September 2001
Date of latest publication of new National Standard
or endorsement of this EN (dop/e): 31 March 2002
Date of withdrawal of any conflicting National Standard (dow): 31 March 2003
ETSI
5 ETSI EN 301 357-2 V1.2.1 (2001-06)
Introduction
The present document is part of a set of standards designed to fit in a modular structure to cover all radio and
telecommunications terminal equipment under the R&TTE Directive [1]. Each standard is a module in the structure.
The modular structure is shown in figure 1.
Disability*
3.3f
Emergency*
3.3e
Fraud*
3.3d
3.3c
Privacy*
No harm to the network*
3.3b
* If needed
Scoped by
Inter-working via the network*
equipment
3.3a class or type
Inter-working with the network
Use of spectrum
3.2
Scoped by frequency and/or equipment type
Proposed general standard
Radio product EMC
Proposed single standard
New standard for Health for radio
3.1a/b (if needed)
Standards notified under EMC Directive
Standards notified under LVD Directive
(incl acoustic safety if needed)
Non-radio Radio (RE)
TTE Non-TTE
Figure 1: Modular structure for the various standards used under the R&TTE Directive
ETSI
...