SIST EN 301 357-2 V1.3.1:2006

SLOVENSKI STANDARD
01-oktober-2006
(OHNWURPDJQHWQD]GUXåOMLYRVWLQ]DGHYHY]YH]L]UDGLMVNLPVSHNWURP(50±
%UH]YUYLþQHDYGLRQDSUDYHGHOXMRþHYREPRþMXRG0+]GR0+]±GHO
+DUPRQL]LUDQL(1NL]DMHPDELVWYHQH]DKWHYHþOHQDGLUHNWLYH5 77(
Electromagnetic compatibility and Radio spectrum Matters (ERM); Cordless audio
devices in the range 25 MHz to 2 000 MHz; Part 2: Harmonized EN covering essential
requirements of article 3.2 of the R&TTE Directive
Ta slovenski standard je istoveten z: EN 301 357-2 Version 1.3.1
ICS:
33.060.99 Druga oprema za radijske Other equipment for
komunikacije radiocommunications
33.100.01 Elektromagnetna združljivost Electromagnetic compatibility
na splošno in general
2003-01.Slovenski inštitut za standardizacijo. Razmnoževanje celote ali delov tega standarda ni dovoljeno.

ETSI EN 301 357-2 V1.3.1 (2006-07)
Harmonized European Standard (Telecommunications series)

Electromagnetic compatibility
and Radio spectrum Matters (ERM);
Cordless audio devices in the range 25 MHz to 2 000 MHz;
Part 2: Harmonized EN covering essential requirements
of article 3.2 of the R&TTE Directive

2 ETSI EN 301 357-2 V1.3.1 (2006-07)

Reference
REN/ERM-TG17WG3-007-2
Keywords
audio, radio, radio MIC, testing
ETSI
650 Route des Lucioles
F-06921 Sophia Antipolis Cedex - FRANCE

Tel.: +33 4 92 94 42 00  Fax: +33 4 93 65 47 16

Siret N° 348 623 562 00017 - NAF 742 C
Association à but non lucratif enregistrée à la
Sous-Préfecture de Grasse (06) N° 7803/88

Important notice
Individual copies of the present document can be downloaded from:
http://www.etsi.org
The present document may be made available in more than one electronic version or in print. In any case of existing or
perceived difference in contents between such versions, the reference version is the Portable Document Format (PDF).
In case of dispute, the reference shall be the printing on ETSI printers of the PDF version kept on a specific network drive
within ETSI Secretariat.
Users of the present document should be aware that the document may be subject to revision or change of status.
Information on the current status of this and other ETSI documents is available at
http://portal.etsi.org/tb/status/status.asp
If you find errors in the present document, please send your comment to one of the following services:
http://portal.etsi.org/chaircor/ETSI_support.asp
Copyright Notification
No part may be reproduced except as authorized by written permission.
The copyright and the foregoing restriction extend to reproduction in all media.

© European Telecommunications Standards Institute 2006.
All rights reserved.
TM TM TM
DECT , PLUGTESTS and UMTS are Trade Marks of ETSI registered for the benefit of its Members.
TM
TIPHON and the TIPHON logo are Trade Marks currently being registered by ETSI for the benefit of its Members.
TM
3GPP is a Trade Mark of ETSI registered for the benefit of its Members and of the 3GPP Organizational Partners.
ETSI
3 ETSI EN 301 357-2 V1.3.1 (2006-07)
Contents
Intellectual Property Rights.4
Foreword.4
Introduction .4
1 Scope.5
2 References.5
3 Definitions, symbols and abbreviations .6
3.1 Definitions.6
3.2 Symbols.6
3.3 Abbreviations.7
4 Technical requirements specifications.7
4.1 Environmental profile.7
4.2 Conformance requirements.7
4.2.1 Transmitter requirements for Band II LPD.7
4.2.1.1 Basic requirements for Band II LPB .7
4.2.1.2 Effective radiated power, occupied bandwidth, channel spacing, frequency error and transmitter
timeout .7
4.2.1.3 Radiated spurious emissions .7
4.2.2 Frequency error.7
4.2.3 Carrier power.7
4.2.4 Channel bandwidth.8
4.2.5 Spurious emissions and cabinet radiation .8
4.2.6 Cordless audio transmitter shutoff .8
4.2.7 Receiver spurious emissions and cabinet radiation.8
5 Testing for compliance with technical requirements.8
5.1 Environmental conditions for testing .8
5.2 Interpretation of the measurement results .8
5.3 Essential radio test suites.9
5.3.1 Transmitter test suites for Band II LPD.9
5.3.2 Frequency error.9
5.3.3 Carrier power.9
5.3.4 Channel bandwidth.9
5.3.5 Radiated spurious emissions and cabinet radiation.9
5.3.6 Cordless audio transmitter shutoff .9
5.3.7 Receiver spurious emissions and cabinet radiation.9
Annex A (normative): HS Requirement and conformance Test specifications Table (HS-
RTT).10
Annex B (informative): The EN title in the official languages .12
Annex C (informative): Bibliography.13
History .14

ETSI
4 ETSI EN 301 357-2 V1.3.1 (2006-07)
Intellectual Property Rights
IPRs essential or potentially essential to the present document may have been declared to ETSI. The information
pertaining to these essential IPRs, if any, is publicly available for ETSI members and non-members, and can be found
in ETSI SR 000 314: "Intellectual Property Rights (IPRs); Essential, or potentially Essential, IPRs notified to ETSI in
respect of ETSI standards", which is available from the ETSI Secretariat. Latest updates are available on the ETSI Web
server (http://webapp.etsi.org/IPR/home.asp).
Pursuant to the ETSI IPR Policy, no investigation, including IPR searches, has been carried out by ETSI. No guarantee
can be given as to the existence of other IPRs not referenced in ETSI SR 000 314 (or the updates on the ETSI Web
server) which are, or may be, or may become, essential to the present document.
Foreword
This Harmonized European Standard (Telecommunications series) has been produced by ETSI Technical Committee
Electromagnetic compatibility and Radio spectrum Matters (ERM).
The present document has been produced by ETSI in response to a mandate from the European Commission issued
under Council Directive 98/34/EC(as amended) laying down a procedure for the provision of information in the field of
technical standards and regulations.
The present document is intended to become a Harmonized Standard, the reference of which will be published in the
Official Journal of the European Communities referencing the Directive 1999/5/EC [1] of the European Parliament and
of the Council of 9 March 1999 on radio equipment and telecommunications terminal equipment and the mutual
recognition of their conformity ("the R&TTE Directive").
Technical specifications relevant to Directive 1999/5/EC are given in annex
The present document is part 2, of a multi-part deliverable covering Cordless audio devices in the range 25 MHz to
2 000 MHz, as identified below:
Part 1: "Technical characteristics and test methods";
Part 2: "Harmonized EN covering essential requirements of article 3.2 of the R&TTE Directive".

National transposition dates
Date of adoption of this EN: 21 July 2006
Date of latest announcement of this EN (doa): 31 October 2006
Date of latest publication of new National Standard
or endorsement of this EN (dop/e): 30 April 2007
Date of withdrawal of any conflicting National Standard (dow): 30 April 2008

Introduction
The present document is part of a set of standards developed by ETSI and is designed to fit in a modular structure to
cover all radio and telecommunications terminal equipment within the scope of the R&TTE Directive. The modular
structure is shown in EG 201 399.
ETSI
5 ETSI EN 301 357-2 V1.3.1 (2006-07)
1 Scope
The present document covers Cordless audio devices considered by definition short-range devices.
• the present document applies to cordless audio consumer radio microphones, in ear monitoring equipment
using either 300 kHz bandwidth analogue modulation; or
• 300 kHz, 600 kHz; or
• 1200 kHz digital FDMA modulation; and
• Band II LPD (low power devices) using 200 kHz bandwidth and analogue modulation.
The frequency bands for this equipment may differ from country to country as specified in their national regulations.
All equipment is intended to be used with integral antennas.
The types of equipment covered by the present document are as follows:
• cordless headphones;
• cordless loudspeakers;
• consumer radio microphones;
• in-ear monitoring;
• in-vehicle cordless;
• personal cordless;
• broadband multi channel audio systems;
• Band II LPD.
The present document is intended to cover the provisions of Directive 1999/5/EC [1] (R&TTE Directive), article 3.2,
which states that "…. radio equipment shall be so constructed that it effectively uses the spectrum allocated to
terrestrial/space radio communications and orbital resources so as to avoid harmful interference".
In addition to the present document, other ENs that specify technical requirements in respect of essential requirements
under other parts of Article 3 of the R&TTE Directive may apply to equipment within the scope of the present
document.
NOTE: A list of such ENs is included on the web site http://www.newapproach.org.
2 References
The following documents contain provisions which, through reference in this text, constitute provisions of the present
document.
• References are either specific (identified by date of publication and/or edition number or version number) or
non-specific.
• For a specific reference, subsequent revisions do not apply.
• For a non-specific reference, the latest version applies.
Referenced documents which are not found to be publicly available in the expected location might be found at
http://docbox.etsi.org/Reference.
[1] Directive 1999/5/EC of the European Parliament and of the Council of 9 March 1999 on radio
equipment and telecommunications terminal equipment and the mutual recognition of their
conformity (R&TTE Directive).
ETSI
6 ETSI EN 301 357-2 V1.3.1 (2006-07)
[2] ETSI EN 301 357-1 (V1.3.1): "Electromagnetic compatibility and Radio spectrum Matters (ERM);
Cordless audio devices in the range 25 MHz to 2 000 MHz; Part 1: Technical characteristics and
test methods".
[3] Void.
[4] ETSI TR 100 028 (all parts - V1.4.1): "Electromagnetic compatibility and Radio spectrum Matters
(ERM); Uncertainties in the measurement of mobile radio equipment characteristics".
3 Definitions, symbols and abbreviations
3.1 Definitions
For the purposes of the present document, the following terms and definitions apply:
artificial antenna: tuned reduced-radiating dummy load equal to the nominal impedance specified by the applicant
integral antenna: antenna, with or without a connector, designed as, and declared as by the manufacturer, an
indispensable part of the equipment
integral antenna for Band II LPD only: permanent fixed antenna, which may be built-in, designed as an
indispensable part of the equipment
necessary bandwidth: is, for a given class of emission, the width of the frequency band which is just sufficient to
ensure the transmission of information at the rate and with the quality required under specified conditions
NOTE: However, the necessary bandwidths of most digital modulation formats are presently not referred to
ITU-R Recommendations of SM series.
port: any connection point on or within the Equipment Under Test (EUT) intended for the connection of cables to or
from that equipment
radiated measurements: measurements that involve the absolute measurement of a radiated electromagnetic field
spurious emission: emission on a frequency or frequencies which are outside the necessary bandwidth and the level of
which may be reduced without affecting the corresponding transmission of information. Spurious emissions include
harmonic emissions, parasitic emissions, intermodulation products and frequency conversion products.
3.2 Symbols
For the purposes of the present document, the following symbols apply:
µW micro Watt
Ω ohm
dBc dB relative to the carrier level
E field strength
GHz Giga Hertz
kHz kilo Hertz
MHz Mega Hertz
mW milli Watt
nW nano Watt
ETSI
----------
...