oSIST prEN IEC 63356-1:2025

SLOVENSKI STANDARD
01-julij-2025
Značilnosti LED-svetlobnega vira - 1. del: Preglednice
LED light source characteristics - Part 1: Data sheets
Eigenschaften von LED-Lichtquellen - Teil 1: Datenblätter
Caractéristiques des sources lumineuses à LED - Partie 1: Feuilles de caractéristiques
Ta slovenski standard je istoveten z: prEN IEC 63356-1:2025
ICS:
29.140.99 Drugi standardi v zvezi z Other standards related to
žarnicami lamps
2003-01.Slovenski inštitut za standardizacijo. Razmnoževanje celote ali delov tega standarda ni dovoljeno.

34A/2444/CDV
COMMITTEE DRAFT FOR VOTE (CDV)
PROJECT NUMBER:
IEC 63356-1 ED3
DATE OF CIRCULATION: CLOSING DATE FOR VOTING:
2025-05-09 2025-08-01
SUPERSEDES DOCUMENTS:
34A/2432/CD, 34A/2443/CC
IEC SC 34A : ELECTRIC LIGHT SOURCES
SECRETARIAT: SECRETARY:
United Kingdom Mr Petar Luzajic
OF INTEREST TO THE FOLLOWING COMMITTEES: HORIZONTAL FUNCTION(S):
TC 34,SC 34B,SC 34C,SC 34D
ASPECTS CONCERNED:
SUBMITTED FOR CENELEC PARALLEL VOTING NOT SUBMITTED FOR CENELEC PARALLEL VOTING
Attention IEC-CENELEC parallel voting
The attention of IEC National Committees, members of
CENELEC, is drawn to the fact that this Committee Draft
for Vote (CDV) is submitted for parallel voting.
The CENELEC members are invited to vote through the
CENELEC online voting system.
This document is still under study and subject to change. It should not be used for reference purposes.
Recipients of this document are invited to submit, with their comments, notification of any relevant patent rights of which
they are aware and to provide supporting documentation.
Recipients of this document are invited to submit, with their comments, notification of any relevant “In Some Countries”
clauses to be included should this proposal proceed. Recipients are reminded that the CDV stage is the final stage for
submitting ISC clauses. (SEE AC/22/2007 OR NEW GUIDANCE DOC).

TITLE:
LED light source characteristics - Part 1: Data sheets

PROPOSED STABILITY DATE: 2028
NOTE FROM TC/SC OFFICERS:
download this electronic file, to make a copy and to print out the content for the sole purpose of preparing National
Committee positions. You may not copy or "mirror" the file or printed version of the document, or any part of it, for
any other purpose without permission in writing from IEC.

2 IEC CDV 63356-1 ED3 © IEC 2025
INTRODUCTION
The IEC 63356 series (LED light source characteristics) is split into two parts:
• IEC 63356-1: Data sheets
The scope of IEC 63356-1 covers data sheets that are comprehensive specifications for
unique LED light sources (LED lamp or LED module). These are full specifications for
products including, where necessary, information on interchangeability aspects, for example
mechanical, electrical, optical.
Each data sheet in IEC 63356-1 relates to an individual type of LED lamp or LED module.
• IEC 63356-2: Design parameters and values
The scope of IEC 63356-2 covers design parameters and values that are used in the design
of an LED light source (LED lamp or LED module) or a related component. IEC 63356-2
does not provide full product specifications but includes important interface aspec ts (e.g.
mechanical, electrical, optical) that should be taken account of in the design of LED light
sources and related components.

IEC CDV 63356-1 ED3 © IEC 2025 3
1 LED LIGHT SOURCE CHARACTERISTICS
3 Part 1: Data sheets
4 1 Scope
5 This part of IEC 63356 specifies data sheets of LED lamps and LED modules with a series of
6 parameters per data sheet for a specific LED light source that enables interchangeability
7 between products from different LED light source manufacturers.
8 NOTE Compliance criteria relating to data sheet parameters in this document are covered by IEC 63554 or IEC
9 62031 for safety, and IEC 63555 for performance.
10 2 Normative references
11 There are no normative references in this document.
12 3 Terms and definitions
13 No terms and definitions are listed in this document.
14 ISO and IEC maintain terminology databases for use in standardization at the following
15 addresses:
16 • IEC Electropedia: available at https://www.electropedia.org
17 • ISO Online browsing platform: available at https://www.iso.org/obp
18 4 Overview and common information
19 4.1 General
20 Dimensions are specified at a temperature of (25 ± 5) °C, unless otherwise specified
21 4.2 Numbering System
22 Data sheets are numbered so that:
23 – the first part represents the number of the publication "63356-1", followed by the letters
24 "IEC";
25 – the second three-digit number represents the data sheet group;
26 – the third four-digit number represents the data sheet number;
27 – the fourth single-digit number represents the data sheet version.
28 NOTE In cases where a data sheet comprises more than one page, all pages of the specific data sheet are issued
29 with the same updated version number.
30 Data sheet numbers are grouped as follows:
31 – single-capped LED lamp data sheets:
32 • non-integrated 100-xxxx;
33 • semi-integrated 110-xxxx;
34 • integrated 120-xxxx;
35 – double-capped LED lamp data sheets:
36 • non-integrated 200-xxxx;
37 • semi-integrated 210-xxxx;
___________
Under preparation. Stage at the time of publication IEC CDV 63554:2024.
Under preparation. Stage at the time of publication IEC CDV 63555:2024.

4 IEC CDV 63356-1 ED3 © IEC 2025
38 • integrated 220-xxxx;
39 – LED module data sheets:
40 • non-integrated 300-xxxx;
41 • semi-integrated 310-xxxx;
42 • integrated 320-xxxx.
43 EXAMPLE 63356-1-IEC-110-0001-1: Single-capped LED lamp, semi-integrated, number 0001, version 1.
44 4.3 List of data sheets
45 4.3.1 List of single-capped LED lamp data sheets
46 Table 1, Table 2 and Table 3 provide a summary of data sheets for non-integrated, semi-
47 integrated and integrated single-capped LED lamps respectively.
48 Table 1 – List of data sheets for non-integrated single-capped LED lamps
Sheet no. Shape Rated diameter Rated current Power range Cap
63356-1-IEC-
1xx-xxxx
mm A DC W
100-0001-1 round 50 0,25 5,0 to 12,5 GH36d-1
100-0002-1 round 50 0,35 7,0 to 17,5 GH36d-2
100-0003-1 round 50 0,5 10,0 to 25,0 GH36d-3
100-0004-1 round 50 0,7 14,0 to 35,0 GH36d-4
100-0005-1 round 50 0,9 18,0 to 45,0 GH36d-5
100-0006-1 round 50 1,1 22,0 to 55,0 GH36d-6
49 Table 2 – List of data sheets for semi-integrated single-capped LED lamps
Void
50 Table 3 – List of data sheets for integrated single-capped LED lamps
Void
52 4.3.2 List of double-capped LED lamp data sheets
53 Table 4, Table 5 and Table 6 provide a summary of data sheets for non-integrated, semi-
54 integrated and integrated double-capped LED lamps respectively.
55 Table 4 – List of data sheets for non-integrated double-capped LED lamps
Nominal Rated Rated Power
Sheet no.
length diameter current range
63356-1-IEC- Shape Cap
2xx-xxxx
mm mm A DC W
200-0001-1 linear 600 25,5 0,35 7,9 to 16,6 GX16t-5
200-0002-1 linear 600 32,5 0,35 7,9 to 16,6 GX16t-5
200-0003-1 linear 900 25,5 0,35 11,0 to 24,8 GX16t-5
200-0004-1 linear 900 32,5 0,35 11,0 to 24,8 GX16t-5
200-0005-1 linear 1 200 25,5 0,35 14,3 to 33,3 GX16t-5
200-0006-1 linear 1 200 32,5 0,35 14,3 to 33,3 GX16t-5
200-0007-1 linear 1 500 25,5 0,35 14,3 to 42,0 GX16t-5
200-0008-1 linear 1 500 32,5 0,35 14,3 to 42,0 GX16t-5
200-0009-1 linear 2 400 25,5 0,35 28,7 to 66,5 GX16t-5
200-0010-1 linear 2 400 32,5 0,35 28,7 to 66,5 GX16t-5
200-0011-1 linear 600 0,35 7,0 to 17,5 GR6d-1

IEC CDV 63356-1 ED3 © IEC 2025 5
Nominal Rated Rated Power
Sheet no.
length diameter current range
63356-1-IEC- Shape Cap
2xx-xxxx
mm mm A DC W
200-0012-1 linear 900 0,50 10,0 to 25,0 GR6d-2
200-0013-1 linear 1200 0,70 14,0 to 35,0 GR6d-3
200-0014-1 linear 1 200 1,05 21,0 to 52,5 GR6d-4
200-0015-1 linear 1 500 1,05 21,0 to 52,5 GR6d-4
200-0016-1 linear 1 500 1,40 28,0 to 70,0 GR6d-5
a
Reserved GR6d-6
200-0017
a
Reserved GR6d-7
200-0018
a
Reserved GR6d-8
200-0019
a
Reserved GR6d-9
200-0020
200-0021-1 linear 550 17,0 0,21 8,0 – 12,6 GJ6.6d-2-1
200-0022-1 linear 550 17,0 0,27 8,0 – 16,2 GJ6.6d-2-2
200-0023-1 linear 550 17,0 0,35 8,0 – 18,0 GJ6.6d-2-3
200-0024-1 linear 550 17,0 0,45 8,0 – 18,0 GJ6.6d-2-4
200-0025-1 linear 550 17,0 0,53 8,0 – 18,0 GJ6.6d-2-5
200-0026-1 linear 600 26,7 0,21 7,0 – 12,0 GJ6.6d-2-1
200-0027-1 linear 600 26,7 0,27 7,0 – 12,0 GJ6.6d-2-2
200-0028-1 linear 600 26,7 0,35 9,0 – 18,0 GJ6.6d-2-3
200-0029-1 linear 600 26,7 0,45 7,0 – 12,0 GJ6.6d-2-4
200-0030-1 linear 850 17,0 0,21 8,0 – 12,6 GJ6.6d-2-1
200-0031-1 linear 850 17,0 0,27 8,0 – 16,2 GJ6.6d-2-2
200-0032-1 linear 850 17,0 0,35 8,0 – 21,0 GJ6.6d-2-3
200-0033-1 linear 850 17,0 0,45 8,0 – 25,0 GJ6.6d-2-4
200-0034-1 linear 850 17,0 0,53 8,0 – 25,0 GJ6.6d-2-5
200-0035-1 linear 850 17,0 0,62 8,0 – 25,0 GJ6.6d-2-6
200-0036-1 linear 850 17,0 0,70 8,0 – 25,0 GJ6.6d-2-7
200-0037-1 linear 900 26,7 0,21 8,0 – 12,6 GJ6.6d-2-1
200-0038-1 linear 900 26,7 0,27 8,0 – 16,2 GJ6.6d-2-2
200-0039-1 linear 900 26,7 0,35 8,0 – 16,5 GJ6.6d-2-3
200-0040-1 linear 900 26,7 0,45 8,0 – 16,5 GJ6.6d-2-4
200-0041-1 linear 900 26,7 0,53 8,0 – 16,5 GJ6.6d-2-5
200-0042-1 linear 1150 17,0 0,21 12,0 – 12,6 GJ6.6d-2-1
200-0043-1 linear 1150 17,0 0,27 12,0 – 16,2 GJ6.6d-2-2
200-0044-1 linear 1150 17,0 0,35 12,0 – 21,0 GJ6.6d-2-3
200-0045-1 linear 1150 17,0 0,45 12,0 – 27,0 GJ6.6d-2-4
200-0046-1 linear 1150 17,0 0,53 12,0 – 31,8 GJ6.6d-2-5
200-0047-1 linear 1150 17,0 0,62 12,0 – 36,0 GJ6.6d-2-6
200-0048-1 linear 1150 17,0 0,70 12,0 – 36,0 GJ6.6d-2-7
200-0049-1 linear 1150 17,0 1,06 12,0 – 36,0 GJ6.6d-2-8
200-0050-1 linear 1200 26,7 0,21 8,0 – 12,6 GJ6.6d-2-1
200-0051-1 linear 1200 26,7 0,27 8,0 – 16,2 GJ6.6d-2-2
200-0052-1 linear 1200 26,7 0,35 8,0 – 21,0 GJ6.6d-2-3
200-0053-1 linear 1200 26,7 0,45 8,0 – 25,0 GJ6.6d-2-4

6 IEC CDV 63356-1 ED3 © IEC 2025
Nominal Rated Rated Power
Sheet no.
length diameter current range
63356-1-IEC- Shape Cap
2xx-xxxx
mm mm A DC W
200-0054-1 linear 1200 26,7 0,53 8,0 – 25,0 GJ6.6d-2-5
200-0055-1 linear 1200 26,7 0,62 8,0 – 25,0 GJ6.6d-2-6
200-0056-1 linear 1200 26,7 0,70 18,0 – 35,0 GJ6.6d-2-7
200-0057-1 linear 2400 26,7 1,06 30,0 – 35,0 GJ6.6d-2-8
a
200-0058 Reserved GJ6.6d-2-9
a
200-0059 Reserved GJ6.6d-2-10
a
200-0060 Reserved GJ6.6d-2-11
a
200-0061 Reserved GJ6.6d-2-12
a
200-0062 Reserved GJ6.6d-2-13
a
No data sheet available.
57 Table 5 – List of data sheets for semi-integrated double-capped LED lamps
Void
58 Table 6 – List of data sheets for integrated double-capped LED lamps
Sheet no. Maximum
Nominal Power
63356-1-IEC- Shape outline Rated voltage Cap
length range
2xx-xxxx diameter
mm mm V AC W
220-0001-1 linear 550 17,0 108 to 382 7,0 to 13,0 GJ6.6t
220-0002-1 linear 600 26,7 108 to 382 8,0 to 17,0 GJ6.6t
220-0003-1 linear 850 17,0 108 to 382 10,0 to 16,0 GJ6.6t
220-0004-1 linear 900 26,7 108 to 382 11,5 to 25,0 GJ6.6t
220-0005-1 linear 1150 17,0 108 to 382 13,0 to 31,0 GJ6.6t
220-0006-1 linear 1200 26,7 108 to 382 9,9 to 32,0 GJ6.6t
220-0007-1 linear 1450 17,0 108 to 382 18,0 to 37,0 GJ6.6t
220-0008-1 linear 2400 26,7 108 to 382 30,0 to 65,0 GJ6.6t
220-0009-1 linear 550 17,0 108 to 382 7,0 to 13,0 GJ6.6d-1
220-0010-1 linear 600 26,7 108 to 382 8,0 to 17,0 GJ6.6d-1
220-0011-1 linear 850 17,0 108 to 382 10,0 to 16,0 GJ6.6d-1
220-0012-1 linear 900 26,7 108 to 382 11,5 to 25,0 GJ6.6d-1
220-0013-1 linear 1150 17,0 108 to 382 13,0 to 31,0 GJ6.6d-1
220-0014-1 linear 1200 26,7 108 to 382 9,9 to 32,0 GJ6.6d-1
220-0015-1 linear 1450 17,0 108 to 382 18,0 to 37,0 GJ6.6d-1
220-0016-1 linear 2400 26,7 108 to 382 30,0 to 65,0 GJ6.6d-1
a
linear  100 to 127 GR6d-10
220-0017
a
linear  200 to 254 GR6d-11
220-0018
a
linear  250 to 288 GR6d-12
220-0019
a
reserved GR6d-13
220-0020
a
linear  100 to 288 GR6d-14
220-0021
a
reserved GR6d-15
220-0022
a
No data sheet available.
IEC CDV 63356-1 ED3 © IEC 2025 7
59 4.3.3 List of LED module data sheets
60 Table 7, Table 8 and Table 9 provide a summary of data sheets for non-integrated, semi-
61 integrated and integrated LED modules respectively.
62 Table 7 – List of data sheets for non-integrated LED modules
Void
64 Table 8 – List of data sheets for semi-integrated LED modules
Void
66 Table 9 – List of data sheets for integrated LED modules
Void
67 5 Single-capped LED lamp data sheets
68 5.1 Single-capped LED lamps with GH36d caps
70 5.1.1 Diagrammatic information for location of lamp dimensions
71 Figure 1 shows the dimensions used in conjunction with the relevant data sheet for a GH36d
72 LED lamp.
74 Key
75 1 reference plane
76 2 key positions
77 NOTE Details about key positions are given in IEC 60061-1, sheet 7004-186.
a
78 The GH36d capped LED lamp is designed to be applied to a heat sink and in combination with the appropriate
79 key system to differentiate between input power combinations.
80 Figure 1 – Location of dimensions of single-capped lamps with a GH36d cap

8 IEC CDV 63356-1 ED3 © IEC 2025
81 5.1.2 Data sheets
82 Data sheet 63356-1-IEC-100-0001-1:
Nominal diameter Rated DC lamp current Range of lamp power Cap
mm A W
50 0,25 5,0 to 12,5 GH36d-1
Dimensions
mm
A B D K T
Min. Max. Min. Max. Min. Max. Min. Max.
49,5 50,5 24,9 25,2 36,0 8,5 9,0 5,5 30,0
Electrical characteristics
DC test current DC lamp voltage
A V
Min. Max.
0,25
20 50
Information for controlgear design
Constant DC current output
Type of controlgear
SELV or PELV
V
DC output voltage range for the constant DC current Min. Max.
20 50
Tolerance of the constant DC current ±10 %
IEC CDV 63356-1 ED3 © IEC 2025 9
89 Data sheet 63356-1-IEC-100-0002-1:
Nominal diameter Rated DC lamp current Range of lamp power Cap
mm A W
50 0,35 7,0 to 17,5 GH36d-2
Dimensions
mm
A B D K T
Min. Max. Min. Max. Min. Max. Min. Max.
49,5 50,5 24,9 25,2 36,0 8,5 9,0 5,5 30,0
Electrical characteristics
DC test current DC lamp voltage
A V
Min. Max.
0,35
20 50
Information for controlgear design
Constant DC current output
Type of controlgear
SELV or PELV
V
DC output voltage range for the constant DC current Min. Max.
20 50
Tolerance of the constant DC current ±10 %
10 IEC CDV 63356-1 ED3 © IEC 2025
96 Data sheet 63356-1-IEC-100-0003-1:
Nominal diameter Rated DC lamp current Range of lamp power Cap
mm A W
50 0,5 10,0 to 25,0 GH36d-3
Dimensions
mm
A B D K T
Min. Max. Min. Max. Min. Max. Min. Max.
49,5 50,5 24,9 25,2 36,0 8,5 9,0 5,5 30,0
Electrical characteristics
DC test current DC lamp voltage
A V
Min. Max.
0,5
20 50
Information for controlgear design
Constant DC current output
Type of controlgear
SELV or PELV
V
DC output voltage range for the constant DC current Min. Max.
20 50
Tolerance of the constant DC current ±10 %
IEC CDV 63356-1 ED3 © IEC 2025 11
103 Data sheet 63356-1-IEC-100-0004-1:
Nominal diameter Rated DC lamp current Range of lamp power Cap
mm A W
50 0,7 14,0 to 35,0 GH36d-4
Dimensions
mm
A B D K T
Min. Max. Min. Max. Min. Max. Min. Max.
49,5 50,5 24,9 25,2 36,0 8,5 9,0 5,5 30,0
Electrical characteristics
DC test current DC lamp voltage
A V
Min. Max.
0,7
20 50
Information for controlgear design
Constant DC current output
Type of controlgear
SELV or PELV
V
DC output voltage range for the constant DC current Min. Max.
20 50
Tolerance of the constant DC current ±10 %
12 IEC CDV 63356-1 ED3 © IEC 2025
110 Data sheet 63356-1-IEC-100-0005-1:
Nominal diameter Rated DC lamp current Range of lamp power Cap
mm A W
50 0,9 18,0 to 45,0 GH36d-5
Dimensions
mm
A B D K T
Min. Max. Min. Max. Min. Max. Min. Max.
49,5 50,5 24,9 25,2 36,0 8,5 9,0 5,5 30,0
Electrical characteristics
DC test current DC lamp voltage
A V
Min. Max.
0,9
20 50
Information for controlgear design
Constant DC current output
Type of controlgear
SELV or PELV
V
DC output voltage range for the constant DC current Min. Max.
20 50
Tolerance of the constant DC current ±10 %
IEC CDV 63356-1 ED3 © IEC 2025 13
117 Data sheet 63356-1-IEC-100-0006-1:
Nominal diameter Rated DC lamp current Range of lamp power Cap
mm A W
50 1,1 22,0 to 55,0 GH36d-6
Dimensions
mm
A B D K T
Min. Max. Min. Max. Min. Max. Min. Max.
49,5 50,5 24,9 25,2 36,0 8,5 9,0 5,5 30,0
Electrical characteristics
DC test current DC lamp voltage
A V
Min. Max.
1,1
20 50
Information for controlgear design
Constant DC current output
Type of controlgear
SELV or PELV
V
DC output voltage range for the constant DC current Min. Max.
20 50
Tolerance of the constant DC current ±10 %
123 5.2 Other single-capped LED lamps
124 Void
14 IEC CDV 63356-1 ED3 © IEC 2025
126 6 Double-capped LED lamp data sheets
127 6.1 Linear double-capped LED lamps with GX16t-5 caps
128 NOTE The data sheets in 6.1.2 are taken from IEC 62931:2017 without technical modifications.
129 6.1.1 Diagrammatic information for location of lamp dimensions
130 Figure 2 shows the dimensions used in conjunction with the relevant data sheet for the GX16t-5
131 LED lamp.
133 Key
134 1) For lamps with GX16t-5 caps and nominal length up to or equal to 1 200 mm
135 The values for dimensions A, B and C are derived from a basic value, designated X.
136 A = cap face to cap face
137 A = X
max
138 B = cap face to end of opposite pins
139 B = X + 7,1 mm
max
140 B = X + 4,7 mm
min
141 C = overall length of the lamp between pin ends
142 C = X + (2 × 7,1) = X + 14,2 mm
max
143 C = not specified
min
144 2) For lamps with GX16t-5 caps and nominal length greater than 1 200 mm
145 The values for dimensions A, B and C are derived from a basic value, designated X.
146 A = cap face to cap face
147 B = cap face to end of opposite pins
148 B = X + 7,4 mm
max
149 B = X + 4,4 mm
min
150 C = overall length of the lamp between pin ends
151 C = X + (2 × 7,4) = X + 14,8 mm
max
152 C = not specified
min
153 NOTE Dimension D specifies the maximum dimension of the cross-section of the tube.
154 Figure 2 – Location of dimensions of linear double-capped lamps with GX16t-5 caps
IEC CDV 63356-1 ED3 © IEC 2025 15
156 6.1.2 Data sheets
157 Data sheet 63356-1-IEC-200-0001-1:
158 NOTE This data sheet is numbered 62931-IEC-600-1 (rated D = 25,5 mm) in IEC 62931:2017.
Nominal length Rated DC lamp current Range of lamp power Cap
mm A W
600 0,35 7,9 to 16,6 GX16t-5
Dimensions
mm
A B C D
Min. Rated Max. Min. Max. Max. Rated Max.
587,4 588,5 589,8 594,5 596,9 604,0 25,5 26,7
Electrical characteristics
DC test current DC lamp voltage
A V
Min. Max.
0,35
22,5 47,5
Information for controlgear design
Type of controlgear Constant DC current output
V
DC output voltage range for the constant DC current Min. Max.
22,5 47,5
Tolerance of the constant DC current ±10 %
16 IEC CDV 63356-1 ED3 © IEC 2025
165 Data sheet 63356-1-IEC-200-0002-1:
166 NOTE This data sheet is numbered 62931-IEC-600-1 (rated D = 32,5 mm) in IEC 62931:2017.
Nominal length Rated DC lamp current Range of lamp power Cap
mm A W
600 0,35 7,9 to 16,6 GX16t-5
Dimensions
mm
A B C D
Min. Rated Max. Min. Max. Max. Rated Max.
587,4 588,5 589,8 594,5 596,9 604,0 32,5 34,0
Electrical characteristics
DC test current DC lamp voltage
A V
Min. Max.
0,35
22,5 47,5
Information for controlgear design
Type of controlgear Constant DC current output
V
DC output voltage range for the constant DC current Min. Max.
22,5 47,5
Tolerance of the constant DC current ±10 %
IEC CDV 63356-1 ED3 © IEC 2025 17
173 Data sheet 63356-1-IEC-200-0003-1:
174 NOTE This data sheet is numbered 62931-IEC-900-1 (rated D = 25,5 mm) in IEC 62931:2017.
Nominal length Rated DC lamp current Range of lamp power Cap
mm A W
900 0,35 11,0 to 24,8 GX16t-5
Dimensions
mm
A B C D
Min. Rated Max. Min. Max. Max. Rated Max.
892,2 893,0 894,6 899,3 901,7 908,8 25,5 26,7
Electrical characteristics
DC test current DC lamp voltage
A V
Min. Max.
0,35
31,7 70,8
Information for controlgear design
Type of controlgear Constant DC current output
V
DC output voltage range for the constant DC current Min. Max.
31,7 70,8
Tolerance of the constant DC current ±10 %
18 IEC CDV 63356-1 ED3 © IEC 2025
181 Data sheet 63356-1-IEC-200-0004-1:
182 NOTE This data sheet is numbered 62931-IEC-900-1 (rated D = 32,5 mm) in IEC 62931:2017.
Nominal length Rated DC lamp current Range of lamp power Cap
mm A W
900 0,35 11,0 to 24,8 GX16t-5
Dimensions
mm
A B C D
Min. Rated Max. Min. Max. Max. Rated Max.
892,2 893,0 894,6 899,3 901,7 908,8 32,5 34,0
Electrical characteristics
DC test current DC lamp voltage
A V
Min. Max.
0,35
31,7 70,8
Information for controlgear design
Type of controlgear Constant DC current output
V
DC output voltage range for the constant DC current Min. Max.
31,7 70,8
Tolerance of the constant DC current ±10 %
IEC CDV 63356-1 ED3 © IEC 2025 19
189 Data sheet 63356-1-IEC-200-0005-1:
190 NOTE This data sheet is numbered 62931-IEC-1200-1 (rated D = 25,5 mm) in IEC 62931:2017.
Nominal length Rated DC lamp current Range of lamp power Cap
mm A W
1 200 0,35 14,3 to 33,3 GX16t-5
Dimensions
mm
A B C D
Min. Rated Max. Min. Max. Max. Rated Max.
1 197,0 1 198,0 1 199,4 1 204,1 1 206,5 1 213,6 25,5 26,7
Electrical characteristics
DC test current DC lamp voltage
A V
Min. Max.
0,35
41 95
Information for controlgear design
Type of controlgear Constant DC current output
V
DC output voltage range for the constant DC current Min. Max.
41 95
Tolerance of the constant DC current ±10 %
20 IEC CDV 63356-1 ED3 © IEC 2025
197 Data sheet 63356-1-IEC-200-0006-1:
198 NOTE This data sheet is numbered 62931-IEC-1200-1 (rated D = 32,5 mm) in IEC 62931:2017.
Nominal length Rated DC lamp current Range of lamp power Cap
mm A W
1 200 0,35 14,3 to 33,3 GX16t-5
Dimensions
mm
A B C D
Min. Rated Max. Min. Max. Max. Rated Max.
1 197,0 1 198,0 1 199,4 1 204,1 1 206,5 1 213,6 32,5 34,0
Electrical characteristics
DC test current DC lamp voltage
A V
Min. Max.
0,35
41 95
Information for controlgear design
Type of controlgear Constant DC current output
V
DC output voltage range for the constant DC current Min. Max.
41 95
Tolerance of the constant DC current ±10 %
IEC CDV 63356-1 ED3 © IEC 2025 21
205 Data sheet 63356-1-IEC-200-0007-1:
206 NOTE This data sheet is numbered 62931-IEC-1500-1 (rated D = 25,5 mm) in IEC 62931:2017.
Nominal length Rated DC lamp current Range of lamp power Cap
mm A W
1 500 0,35 14,3 to 42,0 GX16t-5
Dimensions
mm
A B C D
Min. Rated Max. Min. Max. Max. Rated Max.
1 497,6 1 498,5 1 500,0 1 504,7 1 507,1 1 514,2 25,5 26,7
Electrical characteristics
DC test current DC lamp voltage
A V
Min. Max.
0,35
41 120
Information for controlgear design
Type of controlgear Constant DC current output
V
DC output voltage range for the constant DC current Min. Max.
41 120
Tolerance of the constant DC current ±10 %
22 IEC CDV 63356-1 ED3 © IEC 2025
213 Data sheet 63356-1-IEC-200-0008-1:
214 NOTE This data sheet is numbered 62931-IEC-1500-1 (rated D = 32,5 mm) in IEC 62931:2017.
Nominal length Rated DC lamp current Range of lamp power Cap
mm A W
1 500 0,35 14,3 to 42,0 GX16t-5
Dimensions
mm
A B C D
Min. Rated Max. Min. Max. Max. Rated Max.
1 497,6 1 498,5 1 500,0 1 504,7 1 507,1 1 514,2 32,5 34,0
Electrical characteristics
DC test current DC lamp voltage
A V
Min. Max.
0,35
41 120
Information for controlgear design
Type of controlgear Constant DC current output
V
DC output voltage range for the constant DC current Min. Max.
41 120
Tolerance of the constant DC current ±10 %
IEC CDV 63356-1 ED3 © IEC 2025 23
221 Data sheet 63356-1-IEC-200-0009-1:
222 NOTE This data sheet is numbered 62931-IEC-2400-1 (rated D = 25,5 mm) in IEC 62931:2017.
Nominal length Rated DC lamp current Range of lamp power Cap
mm A W
2 400 0,35 28,7 to 66,5 GX16t-5
Dimensions
mm
A B C D
Min. Rated Max. Min. Max. Max. Rated Max.
2 366,0 2 367,0 2 368,4 2 372,8 2 375,8 2 383,2 25,5 26,7
Electrical characteristics
DC test current DC lamp voltage
A V
Min. Max.
0,35
82 190
Information for controlgear design
Type of controlgear Constant DC current output
V
DC output voltage range for the constant DC current Min. Max.
82 190
Tolerance of the constant DC current ±10 %
24 IEC CDV 63356-1 ED3 © IEC 2025
229 Data sheet 63356-1-IEC-200-0010-1:
230 NOTE This data sheet is numbered 62931-IEC-2400-1 (rated D = 32,5 mm) in IEC 62931:2017.
Nominal length Rated DC lamp current Range of lamp power Cap
mm A W
2 400 0,35 28,7 to 66,5 GX16t-5
Dimensions
mm
A B C D
Min. Rated Max. Min. Max. Max. Rated Max.
2 366,0 2 367,0 2 368,4 2 372,8 2 375,8 2 383,2 32,5 34,0
Electrical characteristics
DC test current DC lamp voltage
A V
Min. Max.
0,35
82 190
Information for controlgear design
Type of controlgear Constant DC current output
V
DC output voltage range for the constant DC current Min. Max.
82 190
Tolerance of the constant DC current ±10 %
IEC CDV 63356-1 ED3 © IEC 2025 25
237 6.2 Linear double-capped LED lamp with GJ6.6 caps
238 6.2.1 Diagrammatic information for location of lamp dimensions
239 Figure 3 shows the dimensions used in conjunction with the relevant data sheet for a GJ6.6
240 LED lamp.
242 Dimension C is the inner distance between windows in GJ6.6 caps.
243 Dimension D is the maximum dimension of the cross-section of the LED tube.
244 NOTE 1 The LED tube can be of any shape.
245 NOTE 2 GJ6.6, GJ6.6t, GJ6.6d-1 and GJ6.6d-2-x cap dimensions are specified in IEC 60061-1.
246 NOTE 3 Lampholder specifications are found in IEC 60061-2, data sheet 7005-188.
247 NOTE 4 Lampholder face-to-face spacing is specified in IEC 60061-2, data sheet 7005-188A.
248 Figure 3 – Location of dimensions of linear double-capped lamps with GJ6.6 caps
26 IEC CDV 63356-1 ED3 © IEC 2025
250 6.2.2 GJ6.6 lamp data sheets
252 Data sheet 63356-1-IEC-200-0021-1:
Nominal length Rated DC Range of lamp power Caps
mm lamp current W
A
a
550 0,21 8,0 to 12,6 GJ6.6d-2-1 and GJ6.6
Dimensions
mm
C D
Min. Max. Max.
551,0 551,6 17,0
Electrical characteristics
DC test current DC lamp voltage
A V
Min. Max.
0,21
38,1 60,0
Information for luminaire design
Lamps with GJ6.6d-2-x caps have no earthing terminal.
Linear double-capped LED lamps with GJ6.6-2-x caps are designed for operation with
SELV power supplies having an output DC current tolerance of ±10 %.
a
The fit system comprises a GJ6.6d-2-x cap on the powered end of the lamp and a GJ6.6 support cap on the
other end.
IEC CDV 63356-1 ED3 © IEC 2025 27
258 Data sheet 63356-1-IEC-200-0022-1:
Nominal length Rated DC Range of lamp power Caps
mm lamp current W
A
a
550 0,27 8,0 to 16,2 GJ6.6d-2-2 and GJ6.6
Dimensions
mm
C D
Min. Max. Max.
551,0 551,6 17,0
Electrical characteristics
DC test current DC lamp voltage
A V
Min. Max.
0,27
29,6 60,0
Information for luminaire design
Lamps with GJ6.6d-2-x caps have no earthing terminal.
Linear double-capped LED lamps with GJ6.6-2-x caps are designed for operation with
SELV power supplies having an output DC current tolerance of ±10 %.
a
The fit system comprises a GJ6.6d-2-x cap on the powered end of the lamp and a GJ6.6 support cap on the
other end.
28 IEC CDV 63356-1 ED3 © IEC 2025
263 Data sheet 63356-1-IEC-200-0023-1:
Nominal length Rated DC Range of lamp power Caps
mm lamp current W
A
a
550 0,35 8,0 to 18,0 GJ6.6d-2-3 and GJ6.6
Dimensions
mm
C D
Min. Max. Max.
551,0 551,6 17,0
Electrical characteristics
DC test current DC lamp voltage
A V
Min. Max.
0,35
22,9 51,4
Information for luminaire design
Lamps with GJ6.6d-2-x caps have no earthing terminal.
Linear double-capped LED lamps with GJ6.6-2-x caps are designed for operation with
SELV power supplies having an output DC current tolerance of ±10 %.
a
The fit system comprises a GJ6.6d-2-x cap on the powered end of the lamp and a GJ6.6 support cap on the
other end.
IEC CDV 63356-1 ED3 © IEC 2025 29
269 Data sheet 63356-1-IEC-200-0024-1:
Nominal length Rated DC Range of lamp power Caps
mm lamp current W
A
a
550 0,45 8,0 to 18,0 GJ6.6d-2-4 and GJ6.6
Dimensions
mm
C D
Min. Max. Max.
551,0 551,6 17,0
Electrical characteristics
DC test current DC lamp voltage
A V
Min. Max.
0,45
17,8 40,0
Information for luminaire design
Lamps with GJ6.6d-2-x caps have no earthing terminal.
Linear double-capped LED lamps with GJ6.6-2-x caps are designed for operation with
SELV power supplies having an output DC current tolerance of ±10 %.
a
The fit system comprises a GJ6.6d-2-x cap on the powered end of the lamp and a GJ6.6 support cap on the
other end.
30 IEC CDV 63356-1 ED3 © IEC 2025
275 Data sheet 63356-1-IEC-200-0025-1:
Nominal length Rated DC Range of lamp power Caps
mm lamp current W
A
a
550 0,53 8,0 to 18,0 GJ6.6d-2-5 and GJ6.6
Dimensions
mm
C D
Min. Max. Max.
551,0 551,6 17,0
Electrical characteristics
DC test current DC lamp voltage
A V
Min. Max.
0,53
15,1 34,0
Information for luminaire design
Lamps with GJ6.6d-2-x caps have no earthing terminal.
Linear double-capped LED lamps with GJ6.6-2-x caps are designed for operation with
SELV power supplies having an output DC current tolerance of ±10 %.
a
The fit system comprises a GJ6.6d-2-x cap on the powered end of the lamp and a GJ6.6 support cap on the
other end.
IEC CDV 63356-1 ED3 © IEC 2025 31
281 Data sheet 63356-1-IEC-200-0026-1:
Nominal length Rated DC Range of lamp power Caps
mm lamp current W
A
a
600 0,21 7,0 to 12,0 GJ6.6d-2-1 and GJ6.6
Dimensions
mm
C D
Min. Max. Max.
591,8 592,4 26,7
Electrical characteristics
DC test current DC lamp voltage
A V
Min. Max.
0,21
33,3 57,1
Information for luminaire design
Lamps with GJ6.6d-2-x caps have no earthing terminal.
Linear double-capped LED lamps with GJ6.6-2-x caps are designed for operation with
SELV power supplies having an output DC current tolerance of ±10 %.
a
The fit system comprises a GJ6.6d-2-x cap on the powered end of the lamp and a GJ6.6 support cap on the
other end.
32 IEC CDV 63356-1 ED3 © IEC 2025
287 Data sheet 63356-1-IEC-200-0027-1:
Nominal length Rated DC Range of lamp power Caps
mm lamp current W
A
a
600 0,27 7,0 to 12,0 GJ6.6d-2-2 and GJ6.6
Dimensions
mm
C D
Min. Max. Max.
591,8 592,4 26,7
Electrical characteristics
DC test current DC lamp voltage
A V
Min. Max.
0,27
25,9 44,4
Information for luminaire design
Lamps with GJ6.6d-2-x caps have no earthing terminal.
Linear double-capped LED lamps with GJ6.6-2-x caps are designed for operation with
SELV power supplies having an output DC current tolerance of ±10 %.
a
The fit system comprises a GJ6.6d-2-x cap on the powered end of the lamp and a GJ6.6 support cap on the
other end.
IEC CDV 63356-1 ED3 © IEC 2025 33
293 Data sheet 63356-1-IEC-200-0028-1:
Nominal length Rated DC Range of lamp power Caps
mm lamp current W
A
a
600 0,35 9,0 to 18,0 GJ6.6d-2-3 and GJ6.6
Dimensions
mm
C D
Min. Max. Max.
591,8 592,4 26,7
Electrical characteristics
DC test current DC lamp voltage
A V
Min. Max.
0,35
25,7 51,4
Information for luminaire design
Lamps with GJ6.6d-2-x caps have no earthing terminal.
Linear double-capped LED lamps with GJ6.6-2-x caps are designed for operation with
SELV power supplies having an output DC current tolerance of ±10 %.
a
The fit system comprises a GJ6.6d-2-x cap on the powered end of the lamp and a GJ6.6 support cap on the
other end.
34 IEC CDV 63356-1 ED3 © IEC 2025
299 Data sheet 63356-1-IEC-200-0029-1:
Nominal length Rated DC Range of lamp power Caps
mm lamp current W
A
a
600 0,45 7,0 to 12,0 GJ6.6d-2-4 and GJ6.6
Dimensions
mm
C D
Min. Max. Max.
591,8 592,4 26,7
Electrical characteristics
DC test current DC lamp voltage
A V
Min. Max.
0,45
15,6 26,7
Information for luminaire design
Lamps with GJ6.6d-2-x caps have no earthing terminal.
Linear double-capped LED lamps with GJ6.6-2-x caps are designed for operation with
SELV power supplies having an output DC current tolerance of ±10 %.
a
The fit system comprises a GJ6.6d-2-x cap on the powered end of the lamp and a GJ6.6 support cap on the
other end.
IEC CDV 63356-1 ED3 © IEC 2025 35
305 Data sheet 63356-1-IEC-200-0030-1:
Nominal length Rated DC Range of lamp power Caps
mm lamp current W
A
a
850 0,21 8,0 to 12,6 GJ6.6d-2-1 and GJ6.6
Dimensions
mm
C D
Min. Max. Max.
851,0 851,6 17,0
Electrical characteristics
DC test current DC lamp voltage
A V
Min. Max.
0,21
38,1 60,0
Information for luminaire design
Lamps with GJ6.6d-2-x caps have no earthing terminal.
Linear double-capped LED lamps with GJ6.6-2-x caps are designed for operation with
SELV power supplies having an output DC current tolerance of ±10 %.
a
The fit system comprises a GJ6.6d-2-x cap on the powered end of the lamp and a GJ6.6 support cap on the
other end.
36 IEC CDV 63356-1 ED3 © IEC 2025
311 Data sheet 63356-1-IEC-200-0031-1:
Nominal length Rated DC Range of lamp power Caps
mm lamp current W
A
a
850 0,27 8,0 to 16,2 GJ6.6d-2-2 and GJ6.6
Dimensions
mm
C D
Min. Max. Max.
851,0 851,6 17,0
Electrical characteristics
DC test current DC lamp voltage
A V
Min. Max.
0,27
29,6 60,0
Information for luminaire design
Lamps with GJ6.6d-2-x caps have no earthing terminal.
Linear double-capped LED lamps with GJ6.6-2-x caps are designed for operation with
SELV power supplies having an output DC current tolerance of ±10 %.
a
The fit system comprises a GJ6.6d-2-x cap on the powered end of the lamp and a GJ6.6 support cap on the
other end.
IEC CDV 63356-1 ED3 © IEC 2025 37
317 Data sheet 63356-1-IEC-200-0032-1:
Nominal length Rated DC Range of lamp power Caps
mm lamp current W
A
a
850 0,35 8,0 to 21,0 GJ6.6d-2-3 and GJ6.6
Dimensions
mm
C D
Min. Max. Max.
851,0 851,6 17,0
Electrical characteristics
DC test current DC lamp voltage
A V
Min. Max.
0,35
22,9 60,0
Information for luminaire design
Lamps with GJ6.6d-2-x caps have no earthing terminal.
Linear double-capped LED lamps with GJ6.6-2-x caps are designed for operation with
SELV power supplies having an output DC current tolerance of ±10 %.
a
The fit system comprises a GJ6.6d-2-x cap on the powered end of the lamp and a GJ6.6 support cap on the
other end.
38 IEC CDV 63356-1 ED3 © IEC 2025
323 Data sheet 63356-1-IEC-200-0033-1:
Nominal length Rated DC Range of lamp power Caps
mm lamp current W
A
a
850 0,45 8,0 to 25,0 GJ6.6d-2-4 and GJ6.6
Dimensions
mm
C D
Min. Max. Max.
851,0 851,6 17,0
Electrical characteristics
DC test current DC lamp voltage
A V
Min. Max.
0,45
17,8 55,6
Information for luminaire design
Lamps with GJ6.6d-2-x caps have no earthing terminal.
Linear double-capped LED lamps with GJ6.6-2-x caps are designed for operation with
SELV power supplies having an output DC current tolerance of ±10 %.
a
The fit system comprises a GJ6.6d-2-x cap on the powered end of the lamp and a GJ6.6 support cap on the
other end.
IEC CDV 63356-1 ED3 © IEC 2025 39
329 Data sheet 63356-1-IEC-200-0034-1:
Nominal length Rated DC Range of lamp power Caps
mm lamp current W
A
a
850 0,53 8,0 to 25,0 GJ6.6d-2-5 and GJ6.6
Dimensions
mm
C D
Min. Max. Max.
851,0 851,6 17,0
Electrical characteristics
DC test current DC lamp voltage
A V
Min. Max.
0,53
15,1 47,2
Information for luminaire design
Lamps with GJ6.6d-2-x caps have no earthing terminal.
Linear double-capped LED lamps with GJ6.6-2-x caps are designed for operation with
SELV power supplies having an output DC current tolerance of ±10 %.
a
The fit system comprises a GJ6.6d-2-x cap on the powered end of the lamp and a GJ6.6 support cap on the
other end.
40 IEC CDV 63356-1 ED3 © IEC 2025
335 Data sheet 63356-1-IEC-200-0035-1:
Nominal length Rated DC Range of lamp power Caps
mm lamp current W
A
a
850 0,62 8,0 to 25,0 GJ6.6d-2-6 and GJ6.6
Dimensions
mm
C D
Min. Max. Max.
851,0 851,6 17,0
Electrical characteristics
DC test current DC lamp voltage
A V
Min. Max.
0,62
12,9 40,3
Information for luminaire design
Lamps with GJ6.6d-2-x caps have no earthing terminal.
Linear double-capped LED lamps with GJ6.6-2-x caps are designed for operation with
SELV power supplies having an output DC current tolerance of ±10 %.
a
The fit system comprises a GJ6.6d-2-x cap on the powered end of the lamp and a GJ6.6 support cap on the
other end.
IEC CDV 63356-1 ED3 © IEC 2025 41
341 Data sheet 63356-1-IEC-200-0036-1:
Nominal length Rated DC Range of lamp power Caps
mm lamp current W
A
a
850 0,70 8,0 to 25,0 GJ6.6d-2-7 and GJ6.6
Dimensions
mm
C D
Min. Max. Max.
851,0 851,6 17,0
Electrical characteristics
DC test current DC lamp voltage
A V
Min. Max.
0,70
11,4 35,7
Information for luminaire design
Lamps with GJ6.6d-2-x caps have no earthing terminal.
Linear double-capped LED lamps with GJ6.6-2-x caps are designed for operation with
SELV power supplies having an output DC current tolerance of ±10 %.
a
The fit system comprises a GJ6.6d-2-x cap on the powered end of the lamp and a GJ6.6 support cap on the
other end.
42 IEC CDV 63356-1 ED3 © IEC 2025
347 Data sheet 63356-1-IEC-200-0037-1:
Nominal length Rated DC Range of lamp power Caps
mm lamp current W
A
a
900 0,21 8,0 to 12,6 GJ6.6d-2-1 and GJ6.6
Dimensions
mm
C D
Min. Max. Max.
896,6 897,2 26,7
Electrical characteristics
DC test current DC lamp voltage
A V
Min. Max.
0,21
38,1 60,0
Information for luminaire design
Lamps with GJ6.6d-2-x caps have no earthing terminal.
Linear double-capped LED lamps with GJ6.6-2-x caps are designed for operation with
SELV power supplies having an output DC current tolerance of ±10 %.
a
The fit system comprises a GJ6.6d-2-x cap on the powered end of the lamp and a GJ6.6 support cap on the
other end.
IEC CDV 63356-1 ED3 © IEC 2025 43
353 Data sheet 63356-1-IEC-200-0038-1:
Nominal length Rated DC Range of lamp power Caps
mm lamp current W
A
a
900 0,27 8,0 to 16,2 GJ6.6d-2-2 and GJ6.6
Dimensions
mm
C D
Min. Max. Max.
896,6 897,2 26,7
Electrical characteristics
DC test current DC lamp voltage
A V
Min. Max.
0,27
29,6 60,0
Information for luminaire design
Lamps with GJ6.6d-2-x caps have no earthing terminal.
Linear double-capped LED lamps with GJ6.6-2-x caps are designed for operation with
SELV power supplies having an output DC current tolerance of ±10 %.
a
The fit system comprises a GJ6.6d-2-x cap on the powered end of the lamp and a GJ6.6 support cap on the
other end.
44 IEC CDV 63356-1 ED3 © IEC 2025
359 Data sheet 63356-1-IEC-200-0039-1:
Nominal length Rated DC Range of lamp power Caps
mm lamp current W
A
a
900 0,35 8,0 to 16,5 GJ6.6d-2-3 and GJ6.6
Dimensions
mm
C D
Min. Max. Max.
896,6 897,2 26,7
Electrical characteristics
DC test current DC lamp voltage
A V
Min. Max.
0,35
22,9 47,1
Information for luminaire design
Lamps with GJ6.6d-2-x caps have no earthing terminal.
Linear double-capped LED lamps with GJ6.6-2-x caps are designed for operation with
SELV power supplies having an output DC current tolerance of ±10 %.
a
The fit system comprises a GJ6.6d-2-x cap on the powered end of the lamp and a GJ6.6 support cap on the
other end.
IEC CDV 63356-1 ED3 © IEC 2025 45
365 Data sheet 63356-1-IEC-200-0040-1:
Nominal length Rated DC Range of lamp power Caps
mm lamp current W
A
a
900 0,45 8,0 to 16,5 GJ6.6d-2-4 and GJ6.6
Dimensions
mm
C D
Min. Max. Max.
896,6 897,2 26,7
Electrical characteristics
DC test current DC lamp voltage
A V
Min. Max.
0,45
17,8 36,7
Information for luminaire design
...