SIST EN ISO 9241-307:2009

SLOVENSKI STANDARD
SIST EN ISO 9241-307:2009
01-januar-2009
(UJRQRPLMDPHGVHERMQHJDYSOLYDþORYHNVLVWHPGHO$QDOL]HLQPHWRGH
SUHVNXãDQMDVNODGQRVWLHOHNWURQVNLKVOLNRYQLK]DVORQRY,62
Ergonomics of human-system interaction - Part 307: Analysis and compliance test
methods for electronic visual displays (ISO 9241-307:2008)
Ergonomie der Mensch-System-Interaktion - Teil 307: Analyse und
Konformitätsverfahren für elektronische optische Anzeigen (ISO 9241-307:2008)
Ergonomie de l'interaction homme-système - Partie 307: Méthodes d'essais d'analyse et
de conformité pour écrans de visualisation électroniques (ISO 9241-307:2008)
Ta slovenski standard je istoveten z: EN ISO 9241-307:2008
ICS:
13.180 Ergonomija Ergonomics
35.180 Terminalska in druga IT Terminal and other
periferna oprema IT peripheral equipment
SIST EN ISO 9241-307:2009 en,fr
2003-01.Slovenski inštitut za standardizacijo. Razmnoževanje celote ali delov tega standarda ni dovoljeno.

---------------------- Page: 1 ----------------------

SIST EN ISO 9241-307:2009

---------------------- Page: 2 ----------------------

SIST EN ISO 9241-307:2009
EUROPEAN STANDARD
EN ISO 9241-307
NORME EUROPÉENNE
EUROPÄISCHE NORM
November 2008
ICS 13.180; 35.180

English Version
Ergonomics of human-system interaction - Part 307: Analysis
and compliance test methods for electronic visual displays (ISO
9241-307:2008)
Ergonomie de l'interaction homme-système - Partie 307: Ergonomie der Mensch-System-Interaktion - Teil 307:
Méthodes d'essais d'analyse et de conformité pour écrans Analyse und Konformitätsverfahren für elektronische
de visualisation électroniques (ISO 9241-307:2008) optische Anzeigen (ISO 9241-307:2008)
This European Standard was approved by CEN on 21 March 2008.
CEN members are bound to comply with the CEN/CENELEC Internal Regulations which stipulate the conditions for giving this European
Standard the status of a national standard without any alteration. Up-to-date lists and bibliographical references concerning such national
standards may be obtained on application to the CEN Management Centre or to any CEN member.
This European Standard exists in three official versions (English, French, German). A version in any other language made by translation
under the responsibility of a CEN member into its own language and notified to the CEN Management Centre has the same status as the
official versions.
CEN members are the national standards bodies of Austria, Belgium, Bulgaria, Cyprus, Czech Republic, Denmark, Estonia, Finland,
France, Germany, Greece, Hungary, Iceland, Ireland, Italy, Latvia, Lithuania, Luxembourg, Malta, Netherlands, Norway, Poland, Portugal,
Romania, Slovakia, Slovenia, Spain, Sweden, Switzerland and United Kingdom.
EUROPEAN COMMITTEE FOR STANDARDIZATION
COMITÉ EUROPÉEN DE NORMALISATION
EUROPÄISCHES KOMITEE FÜR NORMUNG
Management Centre: rue de Stassart, 36  B-1050 Brussels
© 2008 CEN All rights of exploitation in any form and by any means reserved Ref. No. EN ISO 9241-307:2008: E
worldwide for CEN national Members.

---------------------- Page: 3 ----------------------

SIST EN ISO 9241-307:2009
EN ISO 9241-307:2008 (E)
Contents Page
Foreword .3

2

---------------------- Page: 4 ----------------------

SIST EN ISO 9241-307:2009
EN ISO 9241-307:2008 (E)
Foreword
This document (EN ISO 9241-307:2008) has been prepared by Technical Committee ISO/TC 159
"Ergonomics" in collaboration with Technical Committee CEN/TC 122 "Ergonomics", the secretariat of which
is held by DIN.
This European Standard shall be given the status of a national standard, either by publication of an identical
text or by endorsement, at the latest by May 2009, and conflicting national standards shall be withdrawn at the
latest by May 2009.
Attention is drawn to the possibility that some of the elements of this document may be the subject of patent
rights. CEN [and/or CENELEC] shall not be held responsible for identifying any or all such patent rights.
According to the CEN/CENELEC Internal Regulations, the national standards organizations of the following
countries are bound to implement this European Standard: Austria, Belgium, Bulgaria, Cyprus, Czech
Republic, Denmark, Estonia, Finland, France, Germany, Greece, Hungary, Iceland, Ireland, Italy, Latvia,
Lithuania, Luxembourg, Malta, Netherlands, Norway, Poland, Portugal, Romania, Slovakia, Slovenia, Spain,
Sweden, Switzerland and the United Kingdom.
Endorsement notice
The text of ISO 9241-307:2008 has been approved by CEN as a EN ISO 9241-307:2008 without any
modification.

3

---------------------- Page: 5 ----------------------

SIST EN ISO 9241-307:2009

---------------------- Page: 6 ----------------------

SIST EN ISO 9241-307:2009

INTERNATIONAL ISO
STANDARD 9241-307
First edition
2008-11-15


Ergonomics of human-system
interaction —
Part 307:
Analysis and compliance test methods
for electronic visual displays
Ergonomie de l'interaction homme-système —
Partie 307: Méthodes d'essais d'analyse et de conformité pour écrans
de visualisation électroniques




Reference number
ISO 9241-307:2008(E)
©
ISO 2008

---------------------- Page: 7 ----------------------

SIST EN ISO 9241-307:2009
ISO 9241-307:2008(E)
PDF disclaimer
This PDF file may contain embedded typefaces. In accordance with Adobe's licensing policy, this file may be printed or viewed but
shall not be edited unless the typefaces which are embedded are licensed to and installed on the computer performing the editing. In
downloading this file, parties accept therein the responsibility of not infringing Adobe's licensing policy. The ISO Central Secretariat
accepts no liability in this area.
Adobe is a trademark of Adobe Systems Incorporated.
Details of the software products used to create this PDF file can be found in the General Info relative to the file; the PDF-creation
parameters were optimized for printing. Every care has been taken to ensure that the file is suitable for use by ISO member bodies. In
the unlikely event that a problem relating to it is found, please inform the Central Secretariat at the address given below.


COPYRIGHT PROTECTED DOCUMENT


©  ISO 2008
All rights reserved. Unless otherwise specified, no part of this publication may be reproduced or utilized in any form or by any means,
electronic or mechanical, including photocopying and microfilm, without permission in writing from either ISO at the address below or
ISO's member body in the country of the requester.
ISO copyright office
Case postale 56 • CH-1211 Geneva 20
Tel. + 41 22 749 01 11
Fax + 41 22 749 09 47
E-mail copyright@iso.org
Web www.iso.org
Published in Switzerland

ii © ISO 2008 – All rights reserved

---------------------- Page: 8 ----------------------

SIST EN ISO 9241-307:2009
ISO 9241-307:2008(E)
Contents Page
Foreword. x
Introduction . xii
1 Scope . 1
2 Normative references . 1
3 Terms and definitions. 1
4 Guiding principles . 2
5 Compliance routes. 2
5.1 CRT displays for indoor use — Display laboratory method . 2
5.1.1 Intended context of use. 2
Table 1 — Intended context of use — CRT displays. 3
5.1.2 Information about the technology. 6
Table 2 — Basic physical attributes of CRT visual displays. 6
5.1.3 Compliance assessment method. 6
Table 3 — Viewing conditions . 7
Table 4 — Assessment and reporting for design viewing direction . 8
Table 5 — Viewing conditions . 9
Table 6 — Display luminance . 10
Table 7 — Assessment and reporting for display luminance — Artificial information . 10
Table 8 — Assessment and reporting for display luminance — Reality information. 10
Table 9 — Luminance. 11
Table 10 — Assessment and reporting for luminance and contrast adjustment. 13
Table 11 — Special physical environments . 13
Table 12 — Visual artefacts . 14
Table 13 — Assessment and reporting for luminance non-uniformity . 15
Table 14 — Visual artefacts . 15
Table 15 — Assessment and reporting for colour non-uniformity. 16
Table 16 — Visual artefacts . 16
Table 17 — Visual artefacts . 17
Table 18 — Assessment and reporting for unwanted reflections — Artificial information . 19
Table 19 — Assessment and reporting for unwanted reflections — Reality information. 19
Table 20 — Visual artefacts . 20
Table 21 — Legibility and readability. 20
Table 22 — Assessment and reporting for luminance contrast — Artificial information . 21
Table 23 — Assessment and reporting for luminance contrast — Reality information. 22
Table 24 — Legibility and readability. 22
© ISO 2008 – All rights reserved iii

---------------------- Page: 9 ----------------------

SIST EN ISO 9241-307:2009
ISO 9241-307:2008(E)
Table 25 — Legibility of information coding . 26
Table 26 — Assessment and reporting for luminance coding — Artificial information. 26
Table 27 — Legibility of information coding . 27
Table 28 — Assessment and reporting for colour coding — Artificial information. 27
Table 29 — Legibility of information coding . 28
Table 30 — Legibility of graphics. 28
Table 31 — Fidelity. 30
Table 32 — Assessment and reporting for colour gamut and reference white — Artificial
information. 32
Table 33 — Assessment and reporting for colour gamut and reference white — Reality
information. 33
Table 34 — Fidelity. 34
Table 35 — Assessment and reporting for electro-optical transfer functions and grey scale —
Artificial information . 35
Table 36 — Assessment and reporting for electro-optical transfer functions and grey scale —
Reality information. 35
Table 37 — Fidelity. 36
5.2 Emissive flat-panel LCD for indoor use — Display laboratory method. 38
5.2.1 Intended context of use. 38
Table 38 — Intended context of use — Emissive flat-panel LCD. 39
Table 39 — Design viewing direction range. 41
5.2.2 Information about the technology. 46
Table 40 — Basic physical attributes of emissive flat-panel LCD . 46
5.2.3 Compliance assessment . 46
Table 41 — Viewing conditions . 47
Table 42 — Assessment and reporting for design viewing direction. 48
Table 43 — Viewing conditions . 52
Table 44 — Luminance . 52
Table 45 — Assessment and reporting for display luminance — Artificial information and
isotropic visual displays . 53
Table 46 — Assessment and reporting for display luminance — Artificial information and
anisotropic visual displays . 53
Table 47 — Assessment and reporting for display luminance — Reality information and isotropic
visual displays. 53
Table 48 — Assessment and reporting for display luminance — Reality information and
anisotropic visual displays . 54
Table 49 — Luminance . 54
Table 50 — Assessment and reporting for luminance and contrast adjustment. 55
Table 51 — Special physical environments . 56
Table 52 — Visual artefacts. 57
Table 53 — Assessment and reporting for luminance non-uniformity — Artificial information —
Isotropic visual displays . 58
iv © ISO 2008 – All rights reserved

---------------------- Page: 10 ----------------------

SIST EN ISO 9241-307:2009
ISO 9241-307:2008(E)
Table 54 — Assessment and reporting for luminance non-uniformity — Artificial information —
Anisotropic visual displays . 58
Table 55 — Assessment and reporting for luminance non-uniformity — Reality information —
Isotropic visual displays . 59
Table 56 — Assessment and reporting for luminance non-uniformity — Reality information —
Anisotropic visual displays . 59
Table 57 — Visual artefacts . 60
Table 58 — Assessment and reporting for colour non-uniformity — Artificial information —
Isotropic visual displays . 60
Table 59 — Assessment and reporting for colour non-uniformity — Artificial information —
Anisotropic visual displays . 61
Table 60 — Assessment and reporting for colour non-uniformity — Reality information —
Isotropic visual displays . 62
Table 61 — Assessment and reporting for colour non-uniformity — Reality information —
Anisotropic visual displays . 62
Table 62 — Visual artefacts . 63
Table 63 — Pixel fault classification . 64
Table 64 — Visual artefacts . 65
Table 65 — Assessment and reporting for unwanted reflections — Artificial information —
Isotropic visual displays . 67
Table 66 — Assessment and reporting for unwanted reflections — Artificial information —
Anisotropic visual displays . 67
Table 67 — Assessment and reporting for unwanted reflections — Reality information— Isotropic
visual displays . 68
Table 68 — Assessment and reporting for unwanted reflections — Reality information —
Anisotropic visual displays . 68
Table 69 — Visual artefacts . 69
Table 70 — Legibility and readability. 70
Table 71 — Assessment and reporting for luminance contrast — Artificial information —
Isotropic visual displays . 71
Table 72 — Assessment and reporting for luminance contrast — Artificial information —
Anisotropic visual displays . 71
Table 73 — Assessment and reporting for luminance contrast — Reality information — Isotropic
visual displays . 72
Table 74 — Assessment and reporting for luminance contrast — Reality information —
Anisotropic visual displays . 72
Table 75 — Legibility and readability. 73
Table 76 — Legibility of information coding. 75
Table 77 — Assessment and reporting for luminance coding — Artificial information — Isotropic
visual displays . 76
Table 78 — Assessment and reporting for luminance coding — Artificial information —
Anisotropic visual displays . 76
Table 79 — Legibility of information coding. 77
Table 80 — Assessment and reporting for colour coding — Artificial information . 77
Table 81 — Legibility of information coding. 78
© ISO 2008 – All rights reserved v

---------------------- Page: 11 ----------------------

SIST EN ISO 9241-307:2009
ISO 9241-307:2008(E)
Table 82 — Legibility of graphics. 78
Table 83 — Fidelity. 80
Table 84 — Assessment and reporting for colour gamut and reference white — Artificial
information. 82
Table 85 — Assessment and reporting for colour gamut and reference white —
Reality information. 83
Table 86 — Fidelity. 84
Table 87 — Assessment and reporting for electro-optical transfer functions and grey scale —
Artificial information — Isotropic visual displays . 85
Table 88 — Assessment and reporting for electro-optical transfer functions and grey scale —
Artificial information — Anisotropic visual displays . 86
Table 89 — Assessment and reporting for electro-optical transfer functions and grey scale —
Reality information — Isotropic visual displays. 86
Table 90 — Assessment and reporting for electro-optical transfer functions and grey scale —
Reality information — Anisotropic visual displays . 87
Table 91 — Fidelity. 87
5.3 PDP for indoor use — Display laboratory method . 89
5.3.1 Intended context of use. 89
Table 92 — Intended context of use — PDP. 90
5.3.2 Information about the technology. 92
Table 93 — Basic physical attributes of PDP. 92
5.3.3 Compliance assessment method . 93
Table 94 — Viewing conditions . 93
Table 95 — Assessment and reporting for design viewing direction. 94
Table 96 — Viewing conditions . 94
Table 97 — Luminance . 95
Table 98 — Assessment and reporting for display luminance — Artificial information . 95
Table 99 — Assessment and reporting for display luminance — Reality information. 96
Table 100 — Luminance . 96
Table 101 — Assessment and reporting for luminance and contrast adjustment. 98
Table 102 — Special physical environments . 99
Table 103 — Visual artefacts. 99
Table 104 — Assessment and reporting for luminance non-uniformity . 100
Table 105 — Visual artefacts. 101
Table 106 — Assessment and reporting for colour non-uniformity . 101
Table 107 — Visual artefacts. 102
Table 108 — Pixel fault classification . 103
Table 109 — Visual artefacts. 104
Table 110 — Assessment and reporting for unwanted reflections — Artificial information. 106
Table 111 — Assessment and reporting for unwanted reflections — Reality information . 106
Table 112 — Visual artefacts. 107
Table 113 — Legibility and readability. 108
vi © ISO 2008 – All rights reserved

---------------------- Page: 12 ----------------------

SIST EN ISO 9241-307:2009
ISO 9241-307:2008(E)
Table 114 — Assessment and reporting for luminance contrast — Artificial information . 109
Table 115 — Assessment and reporting for luminance contrast — Reality information. 109
Table 116 — Legibility and readability. 110
Table 117 — Legibility of information coding. 112
Table 118
...