iTeh StandardsiTeh Standards
EURUSD
Your shopping cart is empty.
SIST

oSIST prEN ISO 13473-5:2024

(Main)

Characterization of pavement texture by use of surface profiles - Part 5: Determination of megatexture (ISO/DIS 13473-5:2024)

Characterization of pavement texture by use of surface profiles - Part 5: Determination of megatexture (ISO/DIS 13473-5:2024)

ISO 13473-5:2009 specifies procedures for determining the average depth or level of pavement surface megatexture by measuring the profile curve of a surface and calculating megatexture descriptors from this profile. The technique is designed to give meaningful and accurate measurement and description of pavement megatexture characteristics for various purposes.
Since there is an overlap between megatexture and the surrounding ranges, the megatexture descriptors unavoidably have a certain correlation with corresponding measures in those ranges. ISO 13473-5:2009 specifies measurements and procedures which are in relevant parts compatible with those in ISO 13473-1, ISO 8608 and EN 13036-5.

Charakterisierung der Textur von Fahrbahnbelägen unter Verwendung von Oberflächenprofilen - Teil 5: Bestimmung der Megatextur (ISO/DIS 13473-5:2024)

Caractérisation de la texture d'un revêtement de chaussée à partir de relevés de profils de la surface - Partie 5: Détermination de la mégatexture (ISO/DIS 13473-5:2024)

L'ISO 13473-5:2009 spécifie des modes opératoires permettant de déterminer la profondeur moyenne ou le niveau de la mégatexture d'une surface de revêtement en mesurant la courbe du profil de cette surface et en calculant les descripteurs de mégatexture de ce profil. La technique a été élaborée pour donner une mesure et une description significatives et précises des caractéristiques de la mégatexture du revêtement pour différentes utilisations.
Du fait du recouvrement entre la mégatexture et les domaines voisins, les descripteurs de la mégatexture présentent inévitablement une certaine corrélation avec les mesures correspondantes de ces autres domaines. L'ISO 13473-5:2009 spécifie des mesurages et des modes opératoires qui sont dans leurs différents aspects aussi compatibles que possible avec ceux de l'ISO 13473-1, de l'ISO 8608 et de l'EN 13036-5.

Karakterizacija teksture vozišča z uporabo profilov površine - 5. del: Ugotavljanje megateksture (ISO/DIS 13473-5:2024)

General Information

Status
Not Published
Public Enquiry End Date
23-Jun-2024
ICS
17.140.30 - Noise emitted by means of transport
93.080.20 - Road construction materials
Technical Committee
CES - Roads
Current Stage
4020 - Public enquire (PE) (Adopted Project)
Start Date
19-Apr-2024
Due Date
06-Sep-2024
Ref Project
prEN ISO 13473-5 - Characterization of pavement texture by use of surface profiles - Part 5: Determination of megatexture (ISO/DIS 13473-5:2024)

Relations

Revises
SIST EN ISO 13473-5:2010 - Characterization of pavement texture by use of surface profiles - Part 5: Determination of megatexture (ISO 13473-5:2009)
Effective Date
30-Mar-2022

Buy Standard

prEN ISO 13473-5:2024prEN ISO 13473-5:2024
PreviousNext
Draft
prEN ISO 13473-5:2024
English language
43 pages
sale 10% off
Preview
sale 10% off
Preview
e-Library read for
1 day

Standards Content (Sample)

SLOVENSKI STANDARD
oSIST prEN ISO 13473-5:2024
01-junij-2024
Karakterizacija teksture vozišča z uporabo profilov površine - 5. del: Ugotavljanje
megateksture (ISO/DIS 13473-5:2024)
Characterization of pavement texture by use of surface profiles - Part 5: Determination of
megatexture (ISO/DIS 13473-5:2024)
Charakterisierung der Textur von Fahrbahnbelägen unter Verwendung von
Oberflächenprofilen - Teil 5: Bestimmung der Megatextur (ISO/DIS 13473-5:2024)
Caractérisation de la texture d'un revêtement de chaussée à partir de relevés de profils
de la surface - Partie 5: Détermination de la mégatexture (ISO/DIS 13473-5:2024)
Ta slovenski standard je istoveten z: prEN ISO 13473-5
ICS:
17.140.30 Emisija hrupa transportnih Noise emitted by means of
sredstev transport
93.080.20 Materiali za gradnjo cest Road construction materials
oSIST prEN ISO 13473-5:2024 en,fr,de
2003-01.Slovenski inštitut za standardizacijo. Razmnoževanje celote ali delov tega standarda ni dovoljeno.

---------------------- Page: 1 ----------------------
oSIST prEN ISO 13473-5:2024

---------------------- Page: 2 ----------------------
oSIST prEN ISO 13473-5:2024
DRAFT
International
Standard
ISO/DIS 13473-5
ISO/TC 43/SC 1
Characterization of pavement
Secretariat: DIN
texture by use of surface profiles —
Voting begins on:
Part 5: 2024-04-11
Determination of megatexture
Voting terminates on:
2024-07-04
Caractérisation de la texture d'un revêtement de chaussée à
partir de relevés de profils de la surface —
Partie 5: Détermination de la mégatexture
ICS: 17.140.30; 93.080.20
THIS DOCUMENT IS A DRAFT CIRCULATED
FOR COMMENTS AND APPROVAL. IT
IS THEREFORE SUBJECT TO CHANGE
AND MAY NOT BE REFERRED TO AS AN
INTERNATIONAL STANDARD UNTIL
PUBLISHED AS SUCH.
This document is circulated as received from the committee secretariat.
IN ADDITION TO THEIR EVALUATION AS
BEING ACCEPTABLE FOR INDUSTRIAL,
TECHNOLOGICAL, COMMERCIAL AND
USER PURPOSES, DRAFT INTERNATIONAL
STANDARDS MAY ON OCCASION HAVE TO
ISO/CEN PARALLEL PROCESSING
BE CONSIDERED IN THE LIGHT OF THEIR
POTENTIAL TO BECOME STANDARDS TO
WHICH REFERENCE MAY BE MADE IN
NATIONAL REGULATIONS.
RECIPIENTS OF THIS DRAFT ARE INVITED
TO SUBMIT, WITH THEIR COMMENTS,
NOTIFICATION OF ANY RELEVANT PATENT
RIGHTS OF WHICH THEY ARE AWARE AND TO
PROVIDE SUPPORTING DOCUMENTATION.
Reference number
ISO/DIS 13473-5:2024(en)
© ISO 2024

---------------------- Page: 3 ----------------------
oSIST prEN ISO 13473-5:2024
DRAFT
ISO/DIS 13473-5:2024(en)
International
Standard
ISO/DIS 13473-5
ISO/TC 43/SC 1
Characterization of pavement
Secretariat: DIN
texture by use of surface profiles —
Voting begins on:
Part 5:
Determination of megatexture
Voting terminates on:
Caractérisation de la texture d'un revêtement de chaussée à
partir de relevés de profils de la surface —
Partie 5: Détermination de la mégatexture
ICS: 17.140.30; 93.080.20
THIS DOCUMENT IS A DRAFT CIRCULATED
FOR COMMENTS AND APPROVAL. IT
IS THEREFORE SUBJECT TO CHANGE
AND MAY NOT BE REFERRED TO AS AN
INTERNATIONAL STANDARD UNTIL
PUBLISHED AS SUCH.
This document is circulated as received from the committee secretariat.
COPYRIGHT PROTECTED DOCUMENT
IN ADDITION TO THEIR EVALUATION AS
BEING ACCEPTABLE FOR INDUSTRIAL,
© ISO 2024
TECHNOLOGICAL, COMMERCIAL AND
USER PURPOSES, DRAFT INTERNATIONAL
All rights reserved. Unless otherwise specified, or required in the context of its implementation, no part of this publication may
STANDARDS MAY ON OCCASION HAVE TO
ISO/CEN PARALLEL PROCESSING
be reproduced or utilized otherwise in any form or by any means, electronic or mechanical, including photocopying, or posting on
BE CONSIDERED IN THE LIGHT OF THEIR
the internet or an intranet, without prior written permission. Permission can be requested from either ISO at the address below
POTENTIAL TO BECOME STANDARDS TO
WHICH REFERENCE MAY BE MADE IN
or ISO’s member body in the country of the requester.
NATIONAL REGULATIONS.
ISO copyright office
RECIPIENTS OF THIS DRAFT ARE INVITED
CP 401 • Ch. de Blandonnet 8
TO SUBMIT, WITH THEIR COMMENTS,
CH-1214 Vernier, Geneva
NOTIFICATION OF ANY RELEVANT PATENT
Phone: +41 22 749 01 11
RIGHTS OF WHICH THEY ARE AWARE AND TO
PROVIDE SUPPORTING DOCUMENTATION.
Email: copyright@iso.org
Website: www.iso.org
Published in Switzerland Reference number
ISO/DIS 13473-5:2024(en)
© ISO 2024
© ISO 2024 – All rights reserved
ii

---------------------- Page: 4 ----------------------
oSIST prEN ISO 13473-5:2024
ISO/DIS 13473-5:2024(en)
Contents Page
Foreword .iv
Introduction .
...

Questions, Comments and Discussion

Ask us and Technical Secretary will try to provide an answer. You can facilitate discussion about the standard in here.

This May Also Interest You

SIST
SIST EN ISO 11819-1:2023(Main)
Acoustics - Measurement of the influence of road surfaces on traffic noise - Part 1: Statistical Pass-By method (ISO 11819-1:2023)
EN ISO 11819-1:2023

This document specifies a method of comparing traffic noise on different road surfaces for various compositions of road traffic for the purpose of evaluating different road surface types. Sound levels representing either light or heavy vehicles at selected speeds are assigned to a certain road surface. The method is applicable to traffic travelling at constant speed, i.e. free-flowing conditions at posted speeds of 50 km/h and upwards. For conditions where traffic is not free flowing, such as at junctions and where the traffic is congested, the method is not applicable.
A standard method for comparing the noise characteristics of road surfaces gives road and environment authorities a tool for establishing common practices or limits regarding the use of road surfaces meeting certain noise criteria. However, it is not within the scope of ISO 11819 (all parts) to suggest such criteria.
The statistical pass-by (SPB) method is suitable for use for the following main purposes:
—    to classify road surfaces according to their influence on traffic noise (surface classification);
—    to assist in verifying conformity of production of road surfaces;
—    to evaluate acoustic performance of road surfaces throughout operation relative to new condition;
—    to evaluate the influence of different road surfaces on traffic noise at sites irrespective of condition and service time;
—    to evaluate acoustic performance of a road surface relative to a reference surface.
Due to practical restrictions, the method cannot be applied at all possible locations. However, the backing board method can allow some locations to be tested that were not previously acceptable.
Clause 5 gives a general description of the SPB method.

  • Standard
    58 pages
    English language
    sale 10% off
    e-Library read for
    1 day
SIST
SIST EN ISO 13473-1:2019(Main)
Characterization of pavement texture by use of surface profiles - Part 1: Determination of mean profile depth (ISO 13473-1:2019)
EN ISO 13473-1:2019

This document describes a test method to determine the average depth of pavement surface
macrotexture (see Clause 3) by measuring the profile of a surface and calculating the texture depth
from this profile. The technique is designed to provide an average depth value of only the pavement
macrotexture and is considered insensitive to pavement microtexture and unevenness characteristics.
The objective of this document is to make available an internationally accepted procedure for
determination of pavement surface texture depth which is an alternative to the traditionally used
volumetric patch technique (generally using sand or glass beads), giving comparable texture depth
values. To this end, this document describes filtering procedures that are designed to give the best
possible representation of texture depths determined with the volumetric patch method[13].
Modern profilometers in use are almost entirely of the contactless type (e.g. laser, light slit or light
sheet, to mention a few) and this document is primarily intended for this type. However, this does not
exclude application of parts of it for other types of profilometers.
This ISO 13473 series has been prepared as a result of a need identified when specifying a test surface
for vehicle noise measurement (see ISO 10844:2014[6]). Macrotexture depth measurements according
to this document are not generally adequate for specifying test conditions of vehicle or traffic noise
measurements, but have limited applications as a supplement in conjunction with other ways of
specifying a surfacing.
This test method is suitable for determining the mean profile depth (MPD) of a pavement surface.
This MPD can be transformed to a quantity which estimates the macrotexture depth according to
the volumetric patch method. It is applicable to field tests as well as laboratory tests on pavement
samples. When used in conjunction with other physical tests, the macrotexture depth values derived
from this test method are applicable to estimation of pavement skid resistance characteristics (see e.g.
Reference [15]), estimation of noise characteristics and assessment of the suitability of paving materials
or pavement finishing techniques.
The method, together with other measurements (where applicable), such as porosity or microtexture,
can be used to assess the quality of pavements.
This document is adapted for pavement texture measurement and is not intended for other applications.
Pavement aggregate particle shape, size and distribution are surface texture features not addressed
in this procedure. The method is not meant to provide a complete assessment of pavement surface
texture characteristics. In particular, it is known that there are problems in interpreting the result if
the method is applied to porous surfaces or to grooved surfaces (see Annex B).
NOTE Other International Standards dealing with surface profiling methods include, for example,
References [1], [2] and [3]. Although it is not clearly stated in these, they are mainly used for measuring surface
finish (microtexture) of metal surfaces and are not intended to be applied to pavements.

  • Standard
    52 pages
    English language
    sale 10% off
    e-Library read for
    1 day
SIST
SIST EN ISO 13473-5:2010(Main)
Characterization of pavement texture by use of surface profiles - Part 5: Determination of megatexture (ISO 13473-5:2009)
EN ISO 13473-5:2009

This part of ISO 13473 specifies procedures for determining the average depth or level of pavement surface megatexture by measuring the profile curve of a surface and calculating megatexture descriptors from this profile. The technique is designed to give meaningful and accurate measurements and descriptions of pavement megatexture characteristics for various purposes.
Since there is an overlap between megatexture and the surrounding ranges, the megatexture descriptors unavoidably have a certain correlation with corresponding measures in those ranges. This part of ISO 13473 specifies measurements and procedures which are in relevant parts compatible with those in ISO 13473-1, ISO 8608 and EN 13036-5.

  • Standard
    37 pages
    English language
    sale 10% off
    e-Library read for
    1 day
  • Draft
    37 pages
    English language
    sale 10% off
    e-Library read for
    1 day
SIST
SIST EN ISO 11819-1:2002(Main)
Acoustics - Measurement of the influence of road surfaces on traffic noise - Part 1: Statistical Pass-By method (ISO 11819-1:1997)
EN ISO 11819-1:2001

Description of a method of comparing traffic noise on different road surfaces for various compositions of road traffic for the purpose of evaluating different road surface types. Sound levels representing either light or heavy vehicles at selected speeds are assigned to a certain road surface. The method is applicable to traffic travelling at constant speed, i.e. free-flowing conditions at posted speeds of 50 km/h and upwards. For other driving conditions where traffic is not free-flowing, such as at junctions and where the traffic is congested, the road surface is of less importance.

  • Standard
    29 pages
    English language
    sale 10% off
    e-Library read for
    1 day
SIST
SIST EN ISO 11819-1:2023(Main)
Acoustics - Measurement of the influence of road surfaces on traffic noise - Part 1: Statistical Pass-By method (ISO 11819-1:2023)
EN ISO 11819-1:2023

This document specifies a method of comparing traffic noise on different road surfaces for various compositions of road traffic for the purpose of evaluating different road surface types. Sound levels representing either light or heavy vehicles at selected speeds are assigned to a certain road surface. The method is applicable to traffic travelling at constant speed, i.e. free-flowing conditions at posted speeds of 50 km/h and upwards. For conditions where traffic is not free flowing, such as at junctions and where the traffic is congested, the method is not applicable.
A standard method for comparing the noise characteristics of road surfaces gives road and environment authorities a tool for establishing common practices or limits regarding the use of road surfaces meeting certain noise criteria. However, it is not within the scope of ISO 11819 (all parts) to suggest such criteria.
The statistical pass-by (SPB) method is suitable for use for the following main purposes:
—    to classify road surfaces according to their influence on traffic noise (surface classification);
—    to assist in verifying conformity of production of road surfaces;
—    to evaluate acoustic performance of road surfaces throughout operation relative to new condition;
—    to evaluate the influence of different road surfaces on traffic noise at sites irrespective of condition and service time;
—    to evaluate acoustic performance of a road surface relative to a reference surface.
Due to practical restrictions, the method cannot be applied at all possible locations. However, the backing board method can allow some locations to be tested that were not previously acceptable.
Clause 5 gives a general description of the SPB method.

  • Standard
    58 pages
    English language
    sale 10% off
    e-Library read for
    1 day
SIST
SIST EN ISO 13473-1:2019(Main)
Characterization of pavement texture by use of surface profiles - Part 1: Determination of mean profile depth (ISO 13473-1:2019)
EN ISO 13473-1:2019

This document describes a test method to determine the average depth of pavement surface
macrotexture (see Clause 3) by measuring the profile of a surface and calculating the texture depth
from this profile. The technique is designed to provide an average depth value of only the pavement
macrotexture and is considered insensitive to pavement microtexture and unevenness characteristics.
The objective of this document is to make available an internationally accepted procedure for
determination of pavement surface texture depth which is an alternative to the traditionally used
volumetric patch technique (generally using sand or glass beads), giving comparable texture depth
values. To this end, this document describes filtering procedures that are designed to give the best
possible representation of texture depths determined with the volumetric patch method[13].
Modern profilometers in use are almost entirely of the contactless type (e.g. laser, light slit or light
sheet, to mention a few) and this document is primarily intended for this type. However, this does not
exclude application of parts of it for other types of profilometers.
This ISO 13473 series has been prepared as a result of a need identified when specifying a test surface
for vehicle noise measurement (see ISO 10844:2014[6]). Macrotexture depth measurements according
to this document are not generally adequate for specifying test conditions of vehicle or traffic noise
measurements, but have limited applications as a supplement in conjunction with other ways of
specifying a surfacing.
This test method is suitable for determining the mean profile depth (MPD) of a pavement surface.
This MPD can be transformed to a quantity which estimates the macrotexture depth according to
the volumetric patch method. It is applicable to field tests as well as laboratory tests on pavement
samples. When used in conjunction with other physical tests, the macrotexture depth values derived
from this test method are applicable to estimation of pavement skid resistance characteristics (see e.g.
Reference [15]), estimation of noise characteristics and assessment of the suitability of paving materials
or pavement finishing techniques.
The method, together with other measurements (where applicable), such as porosity or microtexture,
can be used to assess the quality of pavements.
This document is adapted for pavement texture measurement and is not intended for other applications.
Pavement aggregate particle shape, size and distribution are surface texture features not addressed
in this procedure. The method is not meant to provide a complete assessment of pavement surface
texture characteristics. In particular, it is known that there are problems in interpreting the result if
the method is applied to porous surfaces or to grooved surfaces (see Annex B).
NOTE Other International Standards dealing with surface profiling methods include, for example,
References [1], [2] and [3]. Although it is not clearly stated in these, they are mainly used for measuring surface
finish (microtexture) of metal surfaces and are not intended to be applied to pavements.

  • Standard
    52 pages
    English language
    sale 10% off
    e-Library read for
    1 day
SIST
SIST EN ISO 13473-5:2010(Main)
Characterization of pavement texture by use of surface profiles - Part 5: Determination of megatexture (ISO 13473-5:2009)
EN ISO 13473-5:2009

This part of ISO 13473 specifies procedures for determining the average depth or level of pavement surface megatexture by measuring the profile curve of a surface and calculating megatexture descriptors from this profile. The technique is designed to give meaningful and accurate measurements and descriptions of pavement megatexture characteristics for various purposes.
Since there is an overlap between megatexture and the surrounding ranges, the megatexture descriptors unavoidably have a certain correlation with corresponding measures in those ranges. This part of ISO 13473 specifies measurements and procedures which are in relevant parts compatible with those in ISO 13473-1, ISO 8608 and EN 13036-5.

  • Standard
    37 pages
    English language
    sale 10% off
    e-Library read for
    1 day
  • Draft
    37 pages
    English language
    sale 10% off
    e-Library read for
    1 day
SIST
SIST EN ISO 11819-1:2002(Main)
Acoustics - Measurement of the influence of road surfaces on traffic noise - Part 1: Statistical Pass-By method (ISO 11819-1:1997)
EN ISO 11819-1:2001

Description of a method of comparing traffic noise on different road surfaces for various compositions of road traffic for the purpose of evaluating different road surface types. Sound levels representing either light or heavy vehicles at selected speeds are assigned to a certain road surface. The method is applicable to traffic travelling at constant speed, i.e. free-flowing conditions at posted speeds of 50 km/h and upwards. For other driving conditions where traffic is not free-flowing, such as at junctions and where the traffic is congested, the road surface is of less importance.

  • Standard
    29 pages
    English language
    sale 10% off
    e-Library read for
    1 day
SIST
SIST EN 60730-2-5:2015/AC:2024(Corrigendum)
Automatic electrical controls - Part 2-5: Particular requirements for automatic electrical burner control systems
EN 60730-2-5:2015/AC:2023-12
  • Corrigendum
    3 pages
    English language
    sale 10% off
    e-Library read for
    1 day
SIST
SIST ISO 22441:2024(Main)
Sterilization of health care products - Low temperature vaporized hydrogen peroxide -- Requirements for the development, validation and routine control of a sterilization process for medical devices (ISO 22441:2022)
ISO 22441:2022

1.1 Inclusions
1.1.1 This document provides requirements for the development, validation and routine monitoring and control of a low temperature sterilization process for medical devices using vaporized hydrogen peroxide (VH2O2) as the sterilizing agent.
1.1.2 This document is intended to be applied by process developers, manufacturers of sterilization equipment, manufacturers of medical devices to be sterilized, organizations performing process validation of VH2O2 sterilization, and organizations responsible for sterilizing medical devices.
NOTE VH2O2 sterilizers can be used in both health care and industrial facilities, and this document acknowledges the similarities and differences between the two applications.
1.2 Exclusions
1.2.1 Processes that use other sterilizing agents, or hydrogen peroxide solution in combination with other chemicals as the sterilizing agent are not addressed in this document.
NOTE See ISO 14937 for guidance on validation of such processes.
1.2.2 This document does not specify requirements for development, validation and routine control of a process for inactivating the causative agents of spongiform encephalopathies, e.g. scrapie, bovine spongiform encephalopathy and Creutzfeldt-Jakob disease. Specific recommendations have been produced in particular countries for the processing of materials potentially contaminated with these agents.
NOTE Some VH2O2 sterilizers have processes that demonstrate some level of inactivation of the causative agents of spongiform encephalopathies, e.g. scrapie, bovine spongiform encephalopathy and Creutzfeldt-Jakob Disease. However, this inactivation is process, cycle, and test protocol specific, therefore this inactivation is outside the scope of this document, and no specific test methods are provided (see [14], [26], and [30] for more information).
1.2.3 This document does not specify requirements for designating a medical device as sterile.
NOTE See for example EN 556–1 or ANSI/AAMI ST67.
1.2.4 This document does not specify requirements for occupational safety associated with the design and operation of VH2O2 sterilization equipment.
NOTE For further information on safety, see examples in the Bibliography. National or regional regulations can also exist.
1.2.5 This document does not apply to the contents of contained product, i.e. product for which the environment within the sterilizer chamber during any stage of the sterilization process does not come into direct contact with the product, such as a solution in a sealed bottle.
1.2.6 This document does not cover hydrogen peroxide decontamination systems for use in rooms, enclosures or environmental spaces.
NOTE These decontamination systems operate at ambient conditions (e.g. temperature and pressure) and in general utilise an approach that is different to that of VH2O2 sterilization processes addressed in this document.

  • Standard
    87 pages
    English language
    sale 10% off
    e-Library read for
    1 day
  • Standard
    79 pages
    English language
    sale 15% off
  • Standard
    85 pages
    French language
    sale 15% off
  • Draft
    78 pages
    English language
    sale 10% off
    e-Library read for
    1 day