SIST ISO 1536:1997
(Main)Continuous mechanical handling equipment for loose bulk materials -- Troughed belt conveyors (other than portable conveyors) -- Belt pulleys
Continuous mechanical handling equipment for loose bulk materials -- Troughed belt conveyors (other than portable conveyors) -- Belt pulleys
Specifies the diameters, length and manufacture of the belt pulleys for troughed belt conveyors (others than portable conveyors).
Engins de manutention continue pour produits en vrac -- Transporteurs à courroie en auge (autres que mobiles) -- Tambours
Naprave za kontinuirni transport sipkih materialov - Koritasti tračni transporterji (razen prenosnih tračnih transporterjev) - Bobni
General Information
- Status
- Published
- Publication Date
- 28-Feb-1997
- Technical Committee
- DTN - Lift and transport appliances
- Current Stage
- 6060 - National Implementation/Publication (Adopted Project)
- Start Date
- 01-Mar-1997
- Due Date
- 01-Mar-1997
- Completion Date
- 01-Mar-1997
Overview
SIST ISO 1536:1997 is an international standard published by the International Organization for Standardization (ISO) that specifies the dimensions and manufacturing requirements for belt pulleys used in troughed belt conveyors - specifically excluding portable conveyors. This standard is essential for professionals in the bulk materials handling industry, ensuring compatibility, safety, and reliability of conveyor systems handling loose bulk materials.
The standard defines basic diameters, lengths, and manufacturing details for belt pulleys designed for continuous mechanical handling equipment. It excludes motorized or geared pulleys from its scope and focuses on pulleys with a flat or crowned surface to maintain effective belt contact.
Key Topics
Belt Pulley Diameters: ISO 1536 specifies a range of basic diameters from 400 mm (16 inches) to 2200 mm (88 inches). These sizes accommodate various belt widths and conveyor requirements.
Pulley Lengths: Defined lengths correspond to belt widths to ensure proper coverage and tension. Table values provide standardized lengths that support consistent manufacturing and installation.
Manufacturing Guidelines:
- Pulley surfaces can be flat or crowned, with the maximum diameter applying for crowned pulleys.
- Lagging (covering surface material) is excluded from diameter measurements.
- Preferred materials include standard tubes nearest to the designated diameters.
Scope Limitations: The standard does not cover portable conveyors or motorized/geared pulleys, focusing solely on standard belt pulleys in fixed troughed belt conveyor systems.
Applications
SIST ISO 1536:1997 is critically important in industries that rely on continuous mechanical handling of loose bulk materials, such as:
- Mining and mineral processing plants
- Bulk material storage and distribution terminals
- Cement, aggregate production, and quarry industries
- Power plants using coal and other bulk fuel conveyors
- Agricultural and food processing facilities with dry bulk handling needs
The application of this standard supports the design, selection, and manufacturing of belt pulleys which ensures optimal conveyor performance, reduces maintenance downtime, and enhances safety by ensuring pulleys fit and function properly within troughed belt conveyor systems.
Related Standards
For a comprehensive conveyor belt system design and compatibility, ISO 1536 should be considered alongside other relevant ISO standards:
- ISO/R 251 – Specifies widths and lengths of conveyor belts, important for pulley length and diameter matching.
- Other ISO standards related to bulk material handling and conveyor components, including belt lagging, conveyor belt safety codes, and motorized pulley standards.
Integrating ISO 1536 with complementary standards ensures holistic compliance with international practices, leading to improved efficiency, safety, and longevity of conveyor systems.
Keywords: ISO 1536, troughed belt conveyors, belt pulleys, bulk material handling, conveyor pulley dimensions, continuous mechanical handling, conveyor belt pulleys, pulley diameters, conveyor pulley manufacturing, bulk conveyors, conveyor standards.
ISO 1536:1975 - Continuous mechanical handling equipment for loose bulk materials -- Troughed belt conveyors (other than portable conveyors) -- Belt pulleys
ISO 1536:1975 - Engins de manutention continue pour produits en vrac -- Transporteurs a courroie en auge (autres que mobiles) -- Tambours
ISO 1536:1975 - Engins de manutention continue pour produits en vrac -- Transporteurs a courroie en auge (autres que mobiles) -- Tambours
Frequently Asked Questions
SIST ISO 1536:1997 is a standard published by the Slovenian Institute for Standardization (SIST). Its full title is "Continuous mechanical handling equipment for loose bulk materials -- Troughed belt conveyors (other than portable conveyors) -- Belt pulleys". This standard covers: Specifies the diameters, length and manufacture of the belt pulleys for troughed belt conveyors (others than portable conveyors).
Specifies the diameters, length and manufacture of the belt pulleys for troughed belt conveyors (others than portable conveyors).
SIST ISO 1536:1997 is classified under the following ICS (International Classification for Standards) categories: 53.040.20 - Components for conveyors. The ICS classification helps identify the subject area and facilitates finding related standards.
SIST ISO 1536:1997 is available in PDF format for immediate download after purchase. The document can be added to your cart and obtained through the secure checkout process. Digital delivery ensures instant access to the complete standard document.
Standards Content (Sample)
SLOVENSKI STANDARD
01-marec-1997
1DSUDYH]DNRQWLQXLUQLWUDQVSRUWVLSNLKPDWHULDORY.RULWDVWLWUDþQLWUDQVSRUWHUML
UD]HQSUHQRVQLKWUDþQLKWUDQVSRUWHUMHY %REQL
Continuous mechanical handling equipment for loose bulk materials -- Troughed belt
conveyors (other than portable conveyors) -- Belt pulleys
Engins de manutention continue pour produits en vrac -- Transporteurs à courroie en
auge (autres que mobiles) -- Tambours
Ta slovenski standard je istoveten z: ISO 1536:1975
ICS:
53.040.20 Deli za transporterje Components for conveyors
2003-01.Slovenski inštitut za standardizacijo. Razmnoževanje celote ali delov tega standarda ni dovoljeno.
INTERNATIONAL ORGANIZATION FOR STANDARDIZATION l MEXflYHAPOAHAFI OPrAHM3ALWi~ I-IO CTAHAAPTM3AUMM~ORGANISATION INTERNATIONALE DE NORMALISATION
Continuous mechanical handling equipment for loose bulk
materials - Troughed belt conveyors (other than portable
conveyors) - Belt pulleys
Engins de manuten tion con tinue pour produits en vrac - Transporteurs 2 courroie en auge (autres que
mobiles) - Tambours
First edition - 1975-10-15
UDC 621.867.2 Ref. No. ISO 1536-1975 (E)
handling equipment, continuous handling, bul k products, conveyors, belt conveyors, pulleys, dimensions.
Descriptors :
Price based on 1 page
ISO (the l nternational Organization for Standardization) is a worldwide federation
of national Standards institutes (ISO Member Bodies). The work of developing
International Standards is carried out through ISO Technical Committees. Every
Member Body interested in a subject for which a Technical Committee has been set
up has the right to be represented on that Committee. International organizations,
governmental and non-governmental, in liaison with ISO, also take part in the work.
Draft International Standards adopted by the Technical Committees are circulated
to the Member Bodies for approval before their acceptance as International
Standards by the ISO Council.
Prior to 1972, the results of the wsrk of the Technical Csmmittees were published
as ISQ Recsmmendations; these documents are now in the process of being
transformed into International Standards. As part of this process, Technical
Committee lSO/TC 101 has reviewed ISO Recommendation R 1536 and found it
technically suit
...
INTERNATIONAL ORGANIZATION FOR STANDARDIZATION l MEXflYHAPOAHAFI OPrAHM3ALWi~ I-IO CTAHAAPTM3AUMM~ORGANISATION INTERNATIONALE DE NORMALISATION
Continuous mechanical handling equipment for loose bulk
materials - Troughed belt conveyors (other than portable
conveyors) - Belt pulleys
Engins de manuten tion con tinue pour produits en vrac - Transporteurs 2 courroie en auge (autres que
mobiles) - Tambours
First edition - 1975-10-15
UDC 621.867.2 Ref. No. ISO 1536-1975 (E)
handling equipment, continuous handling, bul k products, conveyors, belt conveyors, pulleys, dimensions.
Descriptors :
Price based on 1 page
ISO (the l nternational Organization for Standardization) is a worldwide federation
of national Standards institutes (ISO Member Bodies). The work of developing
International Standards is carried out through ISO Technical Committees. Every
Member Body interested in a subject for which a Technical Committee has been set
up has the right to be represented on that Committee. International organizations,
governmental and non-governmental, in liaison with ISO, also take part in the work.
Draft International Standards adopted by the Technical Committees are circulated
to the Member Bodies for approval before their acceptance as International
Standards by the ISO Council.
Prior to 1972, the results of the wsrk of the Technical Csmmittees were published
as ISQ Recsmmendations; these documents are now in the process of being
transformed into International Standards. As part of this process, Technical
Committee lSO/TC 101 has reviewed ISO Recommendation R 1536 and found it
technically suitable for transformation. International Standard ISO 1536 therefore
replaces ISO Recommendation R 1536-1970 to which it is technically identical.
ISO Recommendation R 1536 was approved by the Member Bodies of the
following countries :
Belgium India Sweden
Canada Israel Switzerland
Colombia Italy Thailand
Czechoslovakia Japan Turkey
Egypt, Arab Rep. of New Zealand United Kingdom
Finland Norway U.S.A.
France Poland U.S.S. R.
Germany South Africa, Rep. of
G re
...
NORME INTERNATIONALE
INTERNATIONAL ORGANIZATION FOR STANDARDIZATION 44EXAYHAPOAHAII OPI-AHM3AWW i-i0 CTAHLIAPTM3ALWiM l organisation INTERNATIONALE DE NORMALISATION
Engins de manutention continue pour produits en vrac -
Transporteurs à courroie en’auge (autres que mobiles) -
Tambours
Con tinuous mechanical handling equipmen t for loose bulk materials - Troughed belt conveyors (other than
portable conveyors) - Belt pulleys
Première édition - 1975-10-15
iL
Y
CDU 621.867.2 .
Réf. no : ISO 1536-1975 (F)
E
m
: matériel de manutention, manutention continue, produit en vrac,
Descripteurs transporteur, transporteur à courroie, poulie, dimension.
Prix basé sur 1 page
AVANT-PROPOS
L’ISO (Organisation Internationale de Normalisation) est une fédération mondiale
d’organismes nationaux de normalisation (Comités Membres KO). L’élaboration de
Normes Internationales est confiée aux Comités Techniques ISO. Chaque Comité
Membre intéressé par une étude a le droit de faire partie du Comité Technique
correspondant. Les organisations internationales, gouvernementales et non
gouvernementales, en liaison avec I’ISO, participent également aux travaux.
Les Projets de Normes Internationales adoptés par les Comités Techniques sont
soumis aux Comités Membres pour approbation, avant leur acceptation comme
Normes Internationales par le Conseil de I’ISO.
Avant 1972, les résultats des travaux des Comités Techniques étaient publiés
comme Recommandations ISO; maintenant, ces documents sont en cours de
transformation en Normes Internationales. Compte tenu de cette procédure, le
Comité Technique lSO/TC 101 a examiné la Recommandation ISO/R 1536 et est
d’avis qu’elle peut, du point de vue technique, être transformée en Norme
Internationale. La présente Norme Internationale remplace donc la
Recommandation ISO/R 15364970 à laquelle elle est techniquement identique.
La Recommandation ISO/R 1536 avait été approuvée par les Comités Membres des
pays suivants :
Suède
Afrique du Sud, Rép. d’ Grèce
Allemagne Inde Suisse
Belgique Israël Tchécoslovaquie
Canada Italie Thaïlande
Colombie Japon Turquie
Égypte, Rép. arabe d’ Norvège U.R.S.S.
Espagne Nouvelle-Zélande U.S.A.
Finlande Pologne
France RoyaumeUni
Aucun Comité
...
NORME INTERNATIONALE
INTERNATIONAL ORGANIZATION FOR STANDARDIZATION 44EXAYHAPOAHAII OPI-AHM3AWW i-i0 CTAHLIAPTM3ALWiM l organisation INTERNATIONALE DE NORMALISATION
Engins de manutention continue pour produits en vrac -
Transporteurs à courroie en’auge (autres que mobiles) -
Tambours
Con tinuous mechanical handling equipmen t for loose bulk materials - Troughed belt conveyors (other than
portable conveyors) - Belt pulleys
Première édition - 1975-10-15
iL
Y
CDU 621.867.2 .
Réf. no : ISO 1536-1975 (F)
E
m
: matériel de manutention, manutention continue, produit en vrac,
Descripteurs transporteur, transporteur à courroie, poulie, dimension.
Prix basé sur 1 page
AVANT-PROPOS
L’ISO (Organisation Internationale de Normalisation) est une fédération mondiale
d’organismes nationaux de normalisation (Comités Membres KO). L’élaboration de
Normes Internationales est confiée aux Comités Techniques ISO. Chaque Comité
Membre intéressé par une étude a le droit de faire partie du Comité Technique
correspondant. Les organisations internationales, gouvernementales et non
gouvernementales, en liaison avec I’ISO, participent également aux travaux.
Les Projets de Normes Internationales adoptés par les Comités Techniques sont
soumis aux Comités Membres pour approbation, avant leur acceptation comme
Normes Internationales par le Conseil de I’ISO.
Avant 1972, les résultats des travaux des Comités Techniques étaient publiés
comme Recommandations ISO; maintenant, ces documents sont en cours de
transformation en Normes Internationales. Compte tenu de cette procédure, le
Comité Technique lSO/TC 101 a examiné la Recommandation ISO/R 1536 et est
d’avis qu’elle peut, du point de vue technique, être transformée en Norme
Internationale. La présente Norme Internationale remplace donc la
Recommandation ISO/R 15364970 à laquelle elle est techniquement identique.
La Recommandation ISO/R 1536 avait été approuvée par les Comités Membres des
pays suivants :
Suède
Afrique du Sud, Rép. d’ Grèce
Allemagne Inde Suisse
Belgique Israël Tchécoslovaquie
Canada Italie Thaïlande
Colombie Japon Turquie
Égypte, Rép. arabe d’ Norvège U.R.S.S.
Espagne Nouvelle-Zélande U.S.A.
Finlande Pologne
France RoyaumeUni
Aucun Comité
...
Questions, Comments and Discussion
Ask us and Technical Secretary will try to provide an answer. You can facilitate discussion about the standard in here.
Loading comments...