SIST EN ISO 9514:2019

SLOVENSKI STANDARD
01-september-2019
Nadomešča:
SIST EN ISO 9514:2005
Barve in laki - Ugotavljanje roka uporabnosti večkomponentnih premaznih
sistemov - Priprava in kondicioniranje vzorcev ter smernice za preskušanje (ISO
9514:2019)
Paints and varnishes - Determination of the pot life of multicomponent coating systems -
Preparation and conditioning of samples and guidelines for testing (ISO 9514:2019)
Beschichtungsstoffe - Bestimmung der Verarbeitungszeit von Mehrkomponenten-
Beschichtungssystemen - Vorbereitung und Konditionierung von Proben und Leitfaden
für die Prüfung (ISO 9514:2019)
Peintures et vernis - Détermination du délai maximal d'utilisation après mélange des
systèmes de revêtement multicomposants - Préparation et conditionnement des
échantillons et lignes directrices pour les essais (ISO 9514:2019)
Ta slovenski standard je istoveten z: EN ISO 9514:2019
ICS:
87.040 Barve in laki Paints and varnishes
2003-01.Slovenski inštitut za standardizacijo. Razmnoževanje celote ali delov tega standarda ni dovoljeno.

EN ISO 9514
EUROPEAN STANDARD
NORME EUROPÉENNE
June 2019
EUROPÄISCHE NORM
ICS 87.040 Supersedes EN ISO 9514:2005
English Version
Paints and varnishes - Determination of the pot life of
multicomponent coating systems - Preparation and
conditioning of samples and guidelines for testing (ISO
9514:2019)
Peintures et vernis - Détermination du délai maximal Beschichtungsstoffe - Bestimmung der
d'utilisation après mélange des systèmes de Verarbeitungszeit von Mehrkomponenten-
revêtement multicomposants - Préparation et Beschichtungssystemen - Vorbereitung und
conditionnement des échantillons et lignes directrices Konditionierung von Proben und Leitfaden für die
pour les essais (ISO 9514:2019) Prüfung (ISO 9514:2019)
This European Standard was approved by CEN on 10 June 2019.

CEN members are bound to comply with the CEN/CENELEC Internal Regulations which stipulate the conditions for giving this
European Standard the status of a national standard without any alteration. Up-to-date lists and bibliographical references
concerning such national standards may be obtained on application to the CEN-CENELEC Management Centre or to any CEN
member.
This European Standard exists in three official versions (English, French, German). A version in any other language made by
translation under the responsibility of a CEN member into its own language and notified to the CEN-CENELEC Management
Centre has the same status as the official versions.

CEN members are the national standards bodies of Austria, Belgium, Bulgaria, Croatia, Cyprus, Czech Republic, Denmark, Estonia,
Finland, France, Germany, Greece, Hungary, Iceland, Ireland, Italy, Latvia, Lithuania, Luxembourg, Malta, Netherlands, Norway,
Poland, Portugal, Republic of North Macedonia, Romania, Serbia, Slovakia, Slovenia, Spain, Sweden, Switzerland, Turkey and
United Kingdom.
EUROPEAN COMMITTEE FOR STANDARDIZATION
COMITÉ EUROPÉEN DE NORMALISATION

EUROPÄISCHES KOMITEE FÜR NORMUNG

CEN-CENELEC Management Centre: Rue de la Science 23, B-1040 Brussels
© 2019 CEN All rights of exploitation in any form and by any means reserved Ref. No. EN ISO 9514:2019 E
worldwide for CEN national Members.

Contents Page
European foreword . 3

European foreword
This document (EN ISO 9514:2019) has been prepared by Technical Committee ISO/TC 35 "Paints and
varnishes" in collaboration with Technical Committee CEN/TC 139 “Paints and varnishes” the
secretariat of which is held by DIN.
This European Standard shall be given the status of a national standard, either by publication of an
identical text or by endorsement, at the latest by December 2019, and conflicting national standards
shall be withdrawn at the latest by December 2019.
Attention is drawn to the possibility that some of the elements of this document may be the subject of
patent rights. CEN shall not be held responsible for identifying any or all such patent rights.
This document supersedes EN ISO 9514:2005.
According to the CEN-CENELEC Internal Regulations, the national standards organizations of the
following countries are bound to implement this European Standard: Austria, Belgium, Bulgaria,
Croatia, Cyprus, Czech Republic, Denmark, Estonia, Finland, France, Germany, Greece, Hungary, Iceland,
Ireland, Italy, Latvia, Lithuania, Luxembourg, Malta, Netherlands, Norway, Poland, Portugal, Republic of
North Macedonia, Romania, Serbia, Slovakia, Slovenia, Spain, Sweden, Switzerland, Turkey and the
United Kingdom.
Endorsement notice
The text of ISO 9514:2019 has been approved by CEN as EN ISO 9514:2019 without any modification.

INTERNATIONAL ISO
STANDARD 9514
Third edition
2019-05
Paints and varnishes — Determination
of the pot life of multicomponent
coating systems — Preparation
and conditioning of samples and
guidelines for testing
Peintures et vernis — Détermination du délai maximal d'utilisation
après mélange des systèmes de revêtement multicomposants —
Préparation et conditionnement des échantillons et lignes directrices
pour les essais
Reference number
ISO 9514:2019(E)
©
ISO 2019
ISO 9514:2019(E)
© ISO 2019
All rights reserved. Unless otherwise specified, or required in the context of its implementation, no part of this publication may
be reproduced or utilized otherwise in any form or by any means, electronic or mechanical, including photocopying, or posting
on the internet or an intranet, without prior written permission. Permission can be requested from either ISO at the address
below or ISO’s member body in the country of the requester.
ISO copyright office
CP 401 • Ch. de Blandonnet 8
CH-1214 Vernier, Geneva
Phone: +41 22 749 01 11
Fax: +41 22 749 09 47
Email: copyright@iso.org
Website: www.iso.org
Published in Switzerland
ii © ISO 2019 – All rights reserved

ISO 9514:2019(E)
Contents Page
Foreword .iv
Introduction .v
1 Scope . 1
2 Normative references . 1
3 Terms and definitions . 1
4 Principle . 2
5 Apparatus . 2
6 Sampling . 2
7 Procedure. 2
8 Expression of results . 3
9 Test report . 3
Annex A (informative) Guidance to testing of liquid systems . 4
Bibliography . 5
ISO 9514:2019(E)
Foreword
ISO (the International Organization for Standardization) is a worldwide federation of national standards
bodies (ISO member bodies). The work of preparing International Standards is normally carried out
through ISO technical committees. Each member body interested in a subject for which a technical
committee has been established has the right to be represented on that committee. International
organizations, governmental and non-governmental, in liaison with ISO, also take part in the work.
ISO collaborates closely with the International Electrotechnical Commission (IEC) on all matters of
electrotechnical standardization.
The procedures used to develop this document and those intended for its further maintenance are
described in the ISO/IEC Directives, Part 1. In particular, the different approval criteria needed for the
different types of ISO documents should be noted. This document was drafted in accordance with the
editorial rules of the ISO/IEC Directives, Part 2 (see www .iso .org/directives).
Attention is drawn to the possibility that some of the elements of this document may be the subject of
patent rights. ISO shall not be held responsible for identifying any or all such patent rights. Details of
any patent rights identified during the development of the document will be in the Introduction and/or
on the ISO list of patent declarations received (see www .iso .org/patents).
Any trade name used in this document is information given for the convenience of users and does not
constitute an endorsement.
For an explanation of the voluntary nature of standards, the meaning of IS
...