iTeh StandardsiTeh Standards
EURUSD
Your shopping cart is empty.
SIST

SIST EN 1559-1:1998

(Main)

Founding - Technical conditions of delivery - Part 1: General

Founding - Technical conditions of delivery - Part 1: General

This part of prEN 1559 specifies the general technical delivery conditions for castings made from cast metallic materials except copper alloy castings. Additional technical delivery condition requirements which are specific to particular materials are specified in the following parts of this standard series: prEN 1559-2 for cat steel; prEN 1559-3 for cast iron; prEN 1559-4 for cast aluminium; prEN 1559-5 for cast magnesium.

Gießereiwesen - Technische Lieferbedingungen - Teil 1: Allgemeines

Dieser Teil von EN 1559 legt die allgemeinen technischen Lieferbedingungen für Gußstücke aus metallischen Werkstoffen mit Ausnahme von Gußstücken aus Kupferlegierungen fest. Zusätzliche für bestimmte Werkstoffe spezifische Anforderungen hinsichtlich der Technischen Lieferbedingungen sind in folgenden Teilen dieser Normenreihe festgelegt:-prEN 1559-2 für Stahlguß; - prEN 1559-3 für Gußeisen; - prEN 1559-4 für Aluminiumguß; - prEN 1559-5 für Magnesiumguß.

Fonderie - Conditions techniques de fourniture - Partie 1: Généralités

La présente partie de cette série de normes fixe les conditions générales techniques de fourniture des pieces moulées réalisées a partir de matériaux métalliques de fonderie, a l'exception des alliages de cuivre. Les parties suivantes de la présente série de normes fixent les conditions techniques complémentaires de livraison suivant le type d'alliage: EN 1559-2 pour l'acier moulé; EN 1559-3 pour la fonte moulée; EN 1559-4 pour l'aluminium moulé; EN 1559-5 pour le magnésium moulé.

Livarstvo - Tehnični dobavni pogoji - 1. del: Splošno

General Information

Status
Withdrawn
Publication Date
31-Jul-1998
Withdrawal Date
19-Sep-2011
ICS
77.180 - Equipment for the metallurgical industry
Technical Committee
IFEK - Ferrous metals
Current Stage
9900 - Withdrawal (Adopted Project)
Start Date
15-Sep-2011
Due Date
08-Oct-2011
Completion Date
20-Sep-2011
Ref Project
EN 1559-1:1997 - Founding - Technical conditions of delivery - Part 1: General

Relations

Replaced By
SIST EN 1559-1:2011 - Founding - Technical conditions of delivery - Part 1: General
Effective Date
01-Nov-2011
Replaced By
SIST EN 1559-1:2011 - Founding - Technical conditions of delivery - Part 1: General
Effective Date
08-Jun-2022

Buy Standard

EN 1559-1:1998EN 1559-1:1998
PreviousNext
Standard
EN 1559-1:1998
English language
21 pages
sale 10% off
Preview
sale 10% off
Preview
e-Library read for
1 day

Standards Content (Sample)

2003-01.Slovenski inštitut za standardizacijo. Razmnoževanje celote ali delov tega standarda ni dovoljeno.Gießereiwesen - Technische Lieferbedingungen - Teil 1: AllgemeinesFonderie - Conditions techniques de fourniture - Partie 1: GénéralitésFounding - Technical conditions of delivery - Part 1: General77.180Oprema za metalurško industrijoEquipment for the metallurgical industryICS:Ta slovenski standard je istoveten z:EN 1559-1:1997SIST EN 1559-1:1998en01-avgust-1998SIST EN 1559-1:1998SLOVENSKI
STANDA
...

Questions, Comments and Discussion

Ask us and Technical Secretary will try to provide an answer. You can facilitate discussion about the standard in here.

This May Also Interest You

SIST
SIST EN 1559-1:2011(Main)
Founding - Technical conditions of delivery - Part 1: General
EN 1559-1:2011

This European Standard specifies the general technical delivery conditions for castings made from cast metallic materials except copper alloy castings. Additional technical delivery condition requirements which are specific to particular materials are specified in the following parts of this standard series: EN 1559-2 for cast steel; EN 1559-3 for cast iron; EN 1559-4 for cast aluminium; EN 1559-5 for cast magnesium.

  • Standard
    23 pages
    English language
    sale 10% off
    e-Library read for
    1 day
SIST
SIST EN 12883:2001(Main)
Founding - Equipment for the production of lost patterns for the lost wax casting process
EN 12883:2000

This standard specifies the requirements for tooling for the production of lost patterns for the lost wax process including soluble wax cores, and the production of ceramic cores. This standard does not specify equipment used to produce castings by the Shaw process. This standard does not specify the processes which directly generate the lost pattern(s) by means of numerical data such as stereolithography or sintered wax process or laminated object manufacturing (LOM).

  • Standard
    18 pages
    English language
    sale 10% off
    e-Library read for
    1 day
SIST
SIST EN 12890:2001(Main)
Founding - Patterns, pattern equipment and coreboxes for the production of sand moulds and sand cores
EN 12890:2000

This Standard specifies the requirements for patterns, pattern equipment and coreboxes for the production of sand moulds and/or sand cores. This Standard does not specify equipment for the production of lost patterns, permanent moulds and die casting dies. This Standard does not specify the requirements for ancillary items used in the manufacture of pattern equipment (such as screws, dowels, etc.).

  • Standard
    30 pages
    English language
    sale 10% off
    e-Library read for
    1 day
SIST
SIST EN 12892:2001(Main)
Founding - Equipment for the production of lost patterns for the lost foam casting process
EN 12892:2000

This Standard specifies the requirements for tooling for the production of lost patterns by the lost foam process.

  • Standard
    16 pages
    English language
    sale 10% off
    e-Library read for
    1 day
SIST
SIST EN ISO 23062:2023(Main)
Foundry machinery - Safety requirements for molding and coremaking machinery and associated equipment (ISO 23062:2022)
EN ISO 23062:2022

This document applies to the following equipment:
a)   Machinery constructed to condition and/or reclaim foundry sands for mold and core making (including related moldable granular materials);
b)   Molding machinery;
c)   Coremaking machinery;
d)   Knock-out equipment;
e)   Other directly associated equipment.
This document does not apply to
   ladles and pouring equipment
NOTE   This equipment is covered within EEC by EN 1247
   wax- and lost foam pattern production and wax removal equipment;
   additive manufacturing equipment;
   dust and/or gaseous emissions reduction equipment;
   crane installations;
   winches;
   continuous conveyors or handling systems which could be an integral part of the equipment covered by the scope.
This document deals with foreseeable significant hazards, hazardous situations and events relevant to molding and coremaking machinery and associated equipment when used as intended and under conditions of misuse which are reasonably foreseeable by the manufacturer. It provides the requirements to be met by the manufacturer to ensure the safety of persons and property during the life-cycle phases according ISO 12100:2010; 5.4, as well as in the event of foreseeable failures or malfunctions that can occur in the equipment.
The foreseeable significant hazards are listed in clause 5 and include:
   Mechanical hazards, movement of machinery and workpieces, ejection of material, of liquids and gases, inadequacy of the mechanical strength;
   Explosion, fire, exothermic reactions;
   Contact with hot parts, gases and flames;
   Noise and vibration;
   Thermal heat radiation and conduction;
   Harmful by-products, poisoning, pollution of operators' breathing air.

  • Standard
    54 pages
    English language
    sale 10% off
    e-Library read for
    1 day
  • Draft
    54 pages
    English language
    sale 10% off
    e-Library read for
    1 day
SIST
SIST EN 17449:2022(Main)
Safety of machinery - Safety requirements to finishing lines for metal strip
EN 17449:2022

This document specifies the general safety requirements for finishing lines for metal strip, hereafter referred as finishing line(s), as defined in 3.1.
This document deals with significant hazards, hazardous situations and events relevant for finishing lines when used as intended and under conditions foreseen by the manufacturer. This document provides the requirements to be met by the manufacturer to ensure the safety of persons and property during transport, commissioning, operation and de-commissioning, as well as in the event of foreseeable failures or malfunctions that can occur in the equipment (see Clauses 4 and 5).
This document is applicable to:
Plant (machinery, equipment, devices) for the customer-specific processing of metal strip/metal foil (starting material: hot rolled or cold rolled strip as coil) from the material feeding (1) via the finishing process (2) until the material removal (3) (see exemplary layout in Figure 1).
Figure 1...
Examples of finishing lines and their machinery/equipment covered by the scope of this standard are listed below:
-   finishing lines, e.g.:
-   slitting line (see Figure 2);
-   cut-to-length line (see Figure 3);
-   feeding line (see Figure 4);
-   blanking line;
-   trimming line;
-   rounding machines;
-   strip edge machining lines;
-   inspection lines;
-   rewinding lines, separator lines, doubler lines;
-   strip-supply lines (e.g. for presses or roll forming lines);
-   interlinked machinery/equipment which can be part of a finishing line, e.g.:
-   coil conveying (e.g. feeding in, threading, pushing-in, guiding and transporting);
-   stretching, bending, levelling machine;
-   marking machine;
-   recoiler and uncoiler;
-   shears;
-   punching machine;
-   coil and sleeve handling device;
-   welding machine;
-   oiling machine;
-   scrap chopper, scrap coiler, scrap conveyor;
-   changing device;
-   stacking device;
-   coil transport device (associated with the line);
-   measuring systems and devices;
-   fluid systems.
The following machinery may be part of or linked to a finishing line but are not covered by this document:
-   packaging lines (EN 415);
-   roll forming lines;
-   machines for painting and laminating;
-   embossing machine;
-   saws;
-   plate shear (plate as raw material) (EN 13985);
-   equipment for applying (removing) media to (from) the material surface;
-   coil transport devices outside the boundaries of the line (e.g. supply from the storage);
-   presses (EN 692 and EN 693);
-   milling machines (EN 13128);
-   machinery using laser (EN ISO 11553) for strip processing (e.g. welding, cutting);
-   punching machines (as stand-alone machine);
-   cranes;
-   robots (EN ISO 10218);
-   separate media systems (e.g. compressed air system, exhaust system);
-   storage equipment.
For modernization, this document can be applied for the parts to be modernized.
Figure 2, 3, 4...

  • Standard
    97 pages
    English language
    sale 10% off
    e-Library read for
    1 day
  • Draft
    93 pages
    English language
    sale 10% off
    e-Library read for
    1 day
SIST
SIST EN 14753:2022(Main)
Safety of machinery - Safety requirements for machinery and equipment for continuous casting of steel
EN 14753:2022

This document applies for plant (containing machinery and equipment) used in the process of continuous casting of liquid steel (hereafter referred to as continuous casting machine, CCM) as defined in 3.1.
This document deals with all significant hazards, hazardous situations and events relevant to machinery and equipment for the continuous casting of steel, when they are used as intended and under conditions of misuse which are reasonably foreseeable by the manufacturer (see Clause 4).
This document specifies the safety requirements to be met during design, assembly, transport, commissioning, operation, maintenance (as described in Clause 5) and decommissioning of the equipment.
This document assumes that the machinery and equipment of the plant is operated and maintained by adequately trained and competent personnel (see 7.5). Manual intervention for setting, adjustment and maintenance is accepted as part of the intended use of the plant.
This document assumes that the machinery is used with adequate workstation lighting conforming to EN 12464-1.
NOTE   National regulations regarding lighting should be considered and could differ from requirements of EN 12464-1.
This document applies to:
CCM for the transformation of molten liquid steel into solid products in sections (e.g., square, rectangular, beam blank, circular)
-   CCM's from the point where overhead cranes or other transport systems deposit ladles to CCM (e.g., in a ladle turret, ladle car or ladle stand);
-   via casting process and solidification process;
-   via cutting equipment;
-   thru the run-out-area where the cut product is finished, collected and removed from that area.
This document does not cover safety requirements for:
-   horizontal-CCM for steel;
-   auxiliary plants (e.g., water treatment, refractory handling);
-   ladles;
-   cranes;
-   winches and hoists;
-   conveyors or handling systems;
-   workshop equipment (mould and segment shop, tundish workshop).
NOTE   It is recommended to use this standard in case of modernization for the parts to be modernized.

  • Standard
    87 pages
    English language
    sale 10% off
    e-Library read for
    1 day
  • Draft
    90 pages
    English language
    sale 10% off
    e-Library read for
    1 day
SIST
SIST EN 15061:2022(Main)
Safety of machinery - Safety requirements for strip processing line machinery and equipment
EN 15061:2022

This European Standard defines the health and safety requirements of strip processing lines.
This European Standard deals with significant hazards, hazardous situations and events relevant for strip processing line machinery and equipment, when used as intended and under conditions foreseen by the manufacturer, but also includes foreseeable faults and malfunctions in case of misuse.
This European Standard applies to:
Strip processing lines for treating metal strip: from coil take-over-point of the entry section through the process up to the coil take-over-point of the exit section or interface to other lines (terminal equipment).
NOTE 1   The aforementioned lines/ processes can also occur in combination.
NOTE 2   If the aforementioned lines/processes are combined with processes which are not covered by the scope of this standard, it is recommended to use this standard as a guideline.
NOTE 3   Thermo process equipment integrated in strip processing lines is covered by EN 746 series. For dryers and ovens, in which flammable substances are released, EN 1539 applies.
This European Standard does not cover:
   Thermo process equipment, e. g., in accordance with EN 746 series;
   Dryers and ovens in accordance with EN 1539;
   Coil transporting system before coil take-over-point at the entry section and after coil take-over-point at the exit section, e. g., hook conveyors, overhead cranes, fork lift and railway trucks and other vehicles;
   Acid regeneration plants;
   Regeneration plants which are not integral part of the strip processing line
   Storage equipment for coils;
   Rolling mill stands (i. e., skin pass and reduction stands) according to EN 15094;
   Rollshop equipment;
   Separate process technology (e. g., compressed air system, treatment of water and treatment of rolling lubricant);
   Separate cleaning system for exhaust air;
   Firefighting system.
NOTE: Protection of persons in case of using asphyxiant gases used in firefighting system is covered by this document, see Annex                  C.
This European Standard is not applicable to strip processing line machinery and equipment, which are manufactured before the date of publication of this standard by CEN.
NOTE: In case of revamping parts of a strip processing line, this European Standard should be used as a guideline for the parts to be revamped

  • Standard
    109 pages
    English language
    sale 10% off
    e-Library read for
    1 day
  • Draft
    113 pages
    English language
    sale 10% off
    e-Library read for
    1 day
SIST
SIST EN 16774:2016(Main)
Safety of machinery - Safety requirements for steel converter and associated equipment
EN 16774:2016

This European Standard applies to:
Steel converter and its associated equipment for the oxygen steelmaking process
- from hot metal/liquid steel and scrap charging;
  - via oxygen refining and/or bottom blowing/stirring,
  - temperature measurement and sampling equipment,
  - cooling systems,
  - up to tapping including slag retaining device and deslagging,
  - maintenance devices,
  - process related interfaces (e. g., according to design, controls) to
     - media,
     - primary and secondary gas cleaning plant,
     - material handling systems and ferro alloy systems,
     - transfer cars for steel ladle and slag pot and
     - charging cranes.

  • Standard
    53 pages
    English language
    sale 10% off
    e-Library read for
    1 day
SIST
SIST EN 1559-1:2011(Main)
Founding - Technical conditions of delivery - Part 1: General
EN 1559-1:2011

This European Standard specifies the general technical delivery conditions for castings made from cast metallic materials except copper alloy castings. Additional technical delivery condition requirements which are specific to particular materials are specified in the following parts of this standard series: EN 1559-2 for cast steel; EN 1559-3 for cast iron; EN 1559-4 for cast aluminium; EN 1559-5 for cast magnesium.

  • Standard
    23 pages
    English language
    sale 10% off
    e-Library read for
    1 day