SIST EN 61347-2-11:2002
(Main)Lamp controlgear - Part 2-11: Particular requirements for miscellaneous electronic circuits used with luminaires
Lamp controlgear - Part 2-11: Particular requirements for miscellaneous electronic circuits used with luminaires
This first edition of EN 61347-2-11, published in conjunction with EN 61347-1, represents an editorial review of EN 60920. The formatting into separately published parts provides for ease of future amendments and revisions. Additional requirements will be added as and when a need for them is recognized. This part of EN 61347 specifies general and safety requirements for miscellaneous electronic circuits used with luminaires for use on a.c. supplies up to 1 000 V at 50 Hz or 60 Hz and/or d.c. supplies up to 250 V. This part does not apply to circuits or devices for which specific IEC standards are published. This first edition of EN 61347-2-11, together with EN 61347-1, cancels and replaces the first edition of EN 60920, published in 1990, and constitutes a minor revision. This standard shall be used in conjunction with EN 61347-1.
Geräte für Lampen - Teil 2-11: Besondere Anforderungen an elektronische Module für Leuchten
Appareillages de lampes - Partie 2-11: Prescriptions particulières pour circuits électroniques divers utilisés avec les luminaires
Cette première édition de la EN 61347-2-11, publiée conjointement avec la EN 61347-1, constitue une modification éditoriale de la EN 60920. La présentation en parties publiées séparément facilitera les futures modifications et révisions. Des prescriptions supplémentaires seront ajoutées si et quand le besoin en sera reconnu. La présente partie de la EN 61347 spécifie les prescriptions générales et de sécurité pour les circuits électroniques divers pour les luminaires pour utilisation sur alimentations en courant alternatif jusqu'à 1 000 V à 50 Hz ou 60 Hz et/ou en courant continu jusqu'à 250 V. Cette partie ne s'applique pas aux circuits ou dispositifs pour lesquels il existe une norme CEI. Cette première édition de la EN 61347-2-11, conjointement avec la EN 61347-1, annule et remplace la première édition de la EN 60920, parue en 1990, dont elle constitue une révision mineure. Cette norme doit être utilisée conjointement avec la EN 61347-1.
Krmilne stikalne naprave za sijalke - 2-11. del: Posebne zahteve za različne elektronske sisteme v terminalih (IEC 61347-2-11:2001) (vsebuje popravek AC:2002)
Ta prva izdaja standarda IEC 61347-2-11, ki je objavljen skupaj s standardom IEC 61347-1, predstavlja redakcijski pregled standarda IEC 60920. Oblikovanje v ločeno objavljene dele zagotavlja lažje dopolnjevanje in revidiranje v prihodnje. Dodatne zahteve bodo dodane po potrebi. Ta del standarda IEC 61347 določa splošne in varnostne zahteve za različne elektronske sisteme v terminalih za uporabo pri izmeničnem napajanju do 1000 V pri 50 Hz ali 60 Hz in/ali enosmernem napajanju do 250 V. Ta del se ne uporablja za sisteme ali naprave, za katere so objavljeni posebni standardi IEC. Ta prva izdaja standarda IEC 61347-2-11 skupaj s standardom IEC 61347-1 razveljavlja in nadomešča prvo izdajo standarda IEC 60920, objavljeno leta 1990, ter vključuje manjše popravke. Ta standard je treba uporabljati v povezavi s standardom IEC 61347-1.
General Information
- Status
- Published
- Publication Date
- 30-Nov-2002
- Technical Committee
- IESV - Lamps and related equipment
- Current Stage
- 6060 - National Implementation/Publication (Adopted Project)
- Start Date
- 01-Dec-2002
- Due Date
- 01-Dec-2002
- Completion Date
- 01-Dec-2002
Relations
- Effective Date
- 01-Feb-2025
- Effective Date
- 19-Jul-2016
Overview
SIST EN 61347-2-11:2002 is a European standard published by CLC that defines the particular requirements for miscellaneous electronic circuits used with luminaires. This standard is part of the broader lamp controlgear standards series and is designed to complement EN 61347-1, which covers general and safety requirements.
This first edition replaces and updates the earlier EN 60920 standard and provides a structured framework to ensure safety, reliability, and compatibility for electronic circuits operating on AC supplies up to 1000 V (at 50 Hz or 60 Hz) or DC supplies up to 250 V. It targets the electronic control systems integrated into lighting fixtures, excluding circuits covered by more specific IEC standards.
Key Topics
- Scope and Application: Defines the requirements for a wide range of miscellaneous electronic circuits used within luminaires, ensuring these components meet safety regulations and operate correctly on designated supply voltages.
- Safety Requirements: Establishes the parameters to protect users and equipment against electrical hazards through rigorous testing and design principles.
- Integration with EN 61347-1: EN 61347-2-11 is not a standalone document; it is intended to be used in conjunction with EN 61347-1 to cover complete lamp controlgear systems adequately.
- Voltage and Frequency Limits: Specifies compatibility with AC mains (up to 1,000 V at 50/60 Hz) and DC supplies (up to 250 V), making it applicable across various lighting installations.
- Amendment Flexibility: The standard’s structure supports future revisions and additions to address evolving technology and industry needs.
- Exclusions: Circuits or devices already standardized by specific IEC standards are outside the scope of EN 61347-2-11, ensuring this standard complements existing regulations without overlap.
Applications
The EN 61347-2-11 standard is critical for manufacturers and designers of electronic luminaires requiring compliance with European safety regulations. Typical applications include:
- Lighting Manufacturers: Ensuring that electronic components integrated into luminaires conform to standardized safety and performance criteria.
- Lighting System Designers: Designing control circuits for lamps that comply with stringent operational voltage ratings and safety protocols.
- Electrical Testing Facilities: Testing miscellaneous electronic circuits within luminaires to certify compliance before market release.
- Lighting Control Modules: Development of modules and auxiliary devices used for dimming, switching, or auxiliary control functions within light fixtures.
By adhering to EN 61347-2-11, manufacturers can achieve assurance in the quality, safety, and interoperability of their lighting products throughout the European market.
Related Standards
- EN 61347-1:2001 – General and safety requirements for lamp controlgear, which provides the foundational framework for all part-specific standards, including EN 61347-2-11.
- IEC 60920 (superseded) – Previous standard replaced by EN 61347-2-11, marking advancements and editorial improvements.
- Other IEC Standards for Specific Circuits – EN 61347-2-11 excludes circuits covered by more specific IEC standards, which should be consulted depending on the electronic components in question.
Conclusion
SIST EN 61347-2-11:2002 is an essential standard for ensuring the safe and reliable operation of miscellaneous electronic circuits used within luminaires. By complying with this standard alongside EN 61347-1, stakeholders in the lighting industry can facilitate regulatory adherence, enhance product safety, and support innovation within the European lighting market. Its careful balance of technical requirements and adaptability makes it a vital reference for lamp controlgear development.
Keywords: EN 61347-2-11, lamp controlgear, luminaires, electronic circuits, lighting standards, CLC, safety requirements, AC supply, DC supply, lighting manufacturers, EN 61347-1, IEC standards.
Frequently Asked Questions
SIST EN 61347-2-11:2002 is a standard published by the Slovenian Institute for Standardization (SIST). Its full title is "Lamp controlgear - Part 2-11: Particular requirements for miscellaneous electronic circuits used with luminaires". This standard covers: This first edition of EN 61347-2-11, published in conjunction with EN 61347-1, represents an editorial review of EN 60920. The formatting into separately published parts provides for ease of future amendments and revisions. Additional requirements will be added as and when a need for them is recognized. This part of EN 61347 specifies general and safety requirements for miscellaneous electronic circuits used with luminaires for use on a.c. supplies up to 1 000 V at 50 Hz or 60 Hz and/or d.c. supplies up to 250 V. This part does not apply to circuits or devices for which specific IEC standards are published. This first edition of EN 61347-2-11, together with EN 61347-1, cancels and replaces the first edition of EN 60920, published in 1990, and constitutes a minor revision. This standard shall be used in conjunction with EN 61347-1.
This first edition of EN 61347-2-11, published in conjunction with EN 61347-1, represents an editorial review of EN 60920. The formatting into separately published parts provides for ease of future amendments and revisions. Additional requirements will be added as and when a need for them is recognized. This part of EN 61347 specifies general and safety requirements for miscellaneous electronic circuits used with luminaires for use on a.c. supplies up to 1 000 V at 50 Hz or 60 Hz and/or d.c. supplies up to 250 V. This part does not apply to circuits or devices for which specific IEC standards are published. This first edition of EN 61347-2-11, together with EN 61347-1, cancels and replaces the first edition of EN 60920, published in 1990, and constitutes a minor revision. This standard shall be used in conjunction with EN 61347-1.
SIST EN 61347-2-11:2002 is classified under the following ICS (International Classification for Standards) categories: 29.130.01 - Switchgear and controlgear in general; 29.140.99 - Other standards related to lamps. The ICS classification helps identify the subject area and facilitates finding related standards.
SIST EN 61347-2-11:2002 has the following relationships with other standards: It is inter standard links to SIST EN IEC 61347-2-11:2025, SIST EN 61347-2-11:2002/A1:2019. Understanding these relationships helps ensure you are using the most current and applicable version of the standard.
SIST EN 61347-2-11:2002 is associated with the following European legislation: EU Directives/Regulations: 2006/95/EC, 2014/35/EU, 73/23/EEC. When a standard is cited in the Official Journal of the European Union, products manufactured in conformity with it benefit from a presumption of conformity with the essential requirements of the corresponding EU directive or regulation.
You can purchase SIST EN 61347-2-11:2002 directly from iTeh Standards. The document is available in PDF format and is delivered instantly after payment. Add the standard to your cart and complete the secure checkout process. iTeh Standards is an authorized distributor of SIST standards.
Standards Content (Sample)
SLOVENSKI STANDARD
01-december-2002
.UPLOQHVWLNDOQHQDSUDYH]DVLMDONHGHO 3RVHEQH]DKWHYH]DUD]OLþQH
HOHNWURQVNHVLVWHPHYWHUPLQDOLK ,(& YVHEXMHSRSUDYHN
$&
Lamp controlgear - Part 2-11: Particular requirements for miscellaneous electronic
circuits used with luminaires
Geräte für Lampen - Teil 2-11: Besondere Anforderungen an elektronische Module für
Leuchten
Appareillages de lampes - Partie 2-11: Prescriptions particulières pour circuits
électroniques divers utilisés avec les luminaires
Ta slovenski standard je istoveten z: EN 61347-2-11:2001
ICS:
29.130.01 Stikalne in krmilne naprave Switchgear and controlgear
na splošno in general
29.140.99 Drugi standardi v zvezi z Other standards related to
žarnicami lamps
2003-01.Slovenski inštitut za standardizacijo. Razmnoževanje celote ali delov tega standarda ni dovoljeno.
EUROPEAN STANDARD EN 61347-2-11
NORME EUROPÉENNE
EUROPÄISCHE NORM August 2001
ICS 29.140.99 Supersedes EN 60920:1991 + A1:1993 + A2:1996
English version
Lamp controlgear
Part 2-11: Particular requirements for miscellaneous electronic circuits
used with luminaires
(IEC 61347-2-11:2001)
Appareillages de lampes Geräte für Lampen
Partie 2-11: Prescriptions particulières Teil 2-11: Besondere Anforderungen an
pour circuits électroniques divers utilisés elektronische Module für Leuchten
avec les luminaires (IEC 61347-2-11:2001)
(CEI 61347-2-11:2001)
This European Standard was approved by CENELEC on 2001-07-01. CENELEC members are bound to
comply with the CEN/CENELEC Internal Regulations which stipulate the conditions for giving this European
Standard the status of a national standard without any alteration.
Up-to-date lists and bibliographical references concerning such national standards may be obtained on
application to the Central Secretariat or to any CENELEC member.
This European Standard exists in three official versions (English, French, German). A version in any other
language made by translation under the responsibility of a CENELEC member into its own language and
notified to the Central Secretariat has the same status as the official versions.
CENELEC members are the national electrotechnical committees of Austria, Belgium, Czech Republic,
Denmark, Finland, France, Germany, Greece, Iceland, Ireland, Italy, Luxembourg, Netherlands, Norway,
Portugal, Spain, Sweden, Switzerland and United Kingdom.
CENELEC
European Committee for Electrotechnical Standardization
Comité Européen de Normalisation Electrotechnique
Europäisches Komitee für Elektrotechnische Normung
Central Secretariat: rue de Stassart 35, B - 1050 Brussels
© 2001 CENELEC - All rights of exploitation in any form and by any means reserved worldwide for CENELEC members.
Ref. No. EN 61347-2-11:2001 E
The text of document 34C/528/FDIS, futu
...
Questions, Comments and Discussion
Ask us and Technical Secretary will try to provide an answer. You can facilitate discussion about the standard in here.
Loading comments...