iTeh StandardsiTeh Standards
EURUSD
Your shopping cart is empty.
SIST

SIST EN 611-2:1998

(Main)

Tin and tin alloys - Pewter and pewterware - Part 2: Pewterware

Tin and tin alloys - Pewter and pewterware - Part 2: Pewterware

This Part of EN 611 specifies the requirements for the fabrication, sampling, analysis and marking of pewterware. It does not cover articles manufactured from materials other than pewter which have been coated or clad with pewter. Note: The requirements for pewter alloys are specified in EN 611-2.

Zinn und Zinnlegierungen - Zinnlegierungen und Zinngerät - Teil 2: Zinngerät

Dieser Teil der EN 611 legt die Anforderungen an Herstellung, Probenahme, Analyse und Kennzeichnung von Zinngerät fest. Er gilt nicht für Produkte, die aus anderen Werkstoffen als Zinnlegierungen hergestellt jedoch mit Zinnlegierungen beschichtet oder plattiert wunden. Anmerkung: Die Anforderungen an Zinnlegierungen sind in EN 611-1 festgelegt.

Etain et alliages d'étain - Etain pour la fabrication d'objets en étain et objets en étain - Partie 2: Objets en étain

La présente partie de l'EN 611 spécifie les prescriptions relatives a la fabrication, a l'échantillonnage, a l'analyse et au marquage des objets en étain. Elle ne s'applique pas aux articles fabriqués a partir de matériaux autres que l'étain, recouverts ou plaqués d'étain. Note: les prescriptions concernant les alliages d'étain sont spécifiées dans l'EN 611-1.

Kositer in kositrove zlitine - Kositer-antimonove zlitine - 2. del: Izdelki

General Information

Status
Published
Publication Date
31-Oct-1998
ICS
77.150.60 - Lead, zinc and tin products
Technical Committee
INEK - Nonferrous metals
Current Stage
6060 - National Implementation/Publication (Adopted Project)
Start Date
01-Nov-1998
Due Date
01-Nov-1998
Completion Date
01-Nov-1998
Ref Project
EN 611-2:1996 - Tin and tin alloys - Pewter and pewterware - Part 2: Pewterware

Buy Standard

EN 611-2:1998EN 611-2:1998
PreviousNext
Standard
EN 611-2:1998
English language
9 pages
sale 10% off
Preview
sale 10% off
Preview
e-Library read for
1 day

Standards Content (Sample)

SLOVENSKI STANDARD
SIST EN 611-2:1998
01-november-1998
Kositer in kositrove zlitine - Kositer-antimonove zlitine - 2. del: Izdelki
Tin and tin alloys - Pewter and pewterware - Part 2: Pewterware
Zinn und Zinnlegierungen - Zinnlegierungen und Zinngerät - Teil 2: Zinngerät
Etain et alliages d'étain - Etain pour la fabrication d'objets en étain et objets en étain -
Partie 2: Objets en étain
Ta slovenski standard je istoveten z: EN 611-2:1996
ICS:
77.150.60 6YLQþHQLFLQNRYLLQNRVLWURYL Lead, zinc and tin products
L]GHONL
SIST EN 611-2:1998 en
2003-01.Slovenski inštitut za standardizacijo. Razmnoževanje celote ali delov tega standarda ni dovoljeno.

---------------------- Page: 1 ----------------------

SIST EN 611-2:1998

---------------
...

Questions, Comments and Discussion

Ask us and Technical Secretary will try to provide an answer. You can facilitate discussion about the standard in here.

This May Also Interest You

SIST
SIST EN 12588:2007(Main)
Lead and lead alloys - Rolled lead sheet for building purposes
EN 12588:2006

This European Standard specifies the designation, the requirements for chemical composition, surface condition and dimensional tolerances for rolled lead sheet. Lead sheet covered by this European standard is made by the roll deformation process and is intended for roofs, flashings, weatherings, claddings, pre-formed panels, damp-proof courses and similar building work.
No requirements for supporting construction, design of roof or cladding systems and methods of joining are included.

  • Standard
    12 pages
    English language
    sale 10% off
    e-Library read for
    1 day
SIST
SIST EN 13615:2004/AC:2004(Amendment)
Methods for the analysis of ingot tin - Determination of impurity element contents in tin grades 99,90 % and 99,85 % by atomic spectrometry
EN 13615:2001/AC:2002

TC - Modification in 7.2

  • Corrigendum
    2 pages
    English language
    sale 10% off
    e-Library read for
    1 day
SIST
SIST EN 13615:2004(Main)
Methods for the analysis of ingot tin - Determination of impurity element contents in tin grades 99,90 % and 99,85 % by atomic spectrometry
EN 13615:2001

This European Standard specifies atomic spectroscopic methods (Atomic Absorption Spectrometry (AAS) or inductively coupled plasma Atomic Emission Spectrometry (ICP-AES)) intended for the analysis of ingot tin. It is written for use by experienced analysts familiar with atomic spectrometric techniques..

  • Standard
    15 pages
    English language
    sale 10% off
    e-Library read for
    1 day
SIST
SIST EN 12548:2000(Main)
Lead and lead alloys - Lead alloy ingots for electric cable sheathing and for sleeves
EN 12548:1999

This European Standard specifies the designation, chemical composition, sampling and analysis, marking, labelling and other requirements for lead alloys in ingot form which are used for the manufacture of electric cable sheathing and sleeves.

  • Standard
    12 pages
    English language
    sale 10% off
    e-Library read for
    1 day
SIST
SIST EN 1559-6:1999(Main)
Founding - Technical conditions of delivery - Part 6: Additional requirements for zinc alloy castings
EN 1559-6:1998

This part of EN 1559 applies to castings made from zinc alloys produced by sand casting, permanent mould casting, pressure die casting, centrifugal casting, continuous casting or investment casting. This standard specifies the additional technical delivery conditions for zinc alloy castings. This standard does not apply to ingots, bars, billets (or other shapes) for further reprocessing, such as remelting, grinding or extrusion.

  • Standard
    7 pages
    English language
    sale 10% off
    e-Library read for
    1 day
SIST
SIST EN 12844:1999(Main)
Zinc and zinc alloys - Castings - Specifications
EN 12844:1998

This European Standard specifies the designation, chemical composition, marking and other requirements for zinc alloy castings.

  • Standard
    11 pages
    English language
    sale 10% off
    e-Library read for
    1 day
SIST
SIST EN 610:1998(Main)
Tin and tin alloys - Ingot tin
EN 610:1995

This draft European Standard specifies the requirements for the chemical composition, surface condition, sampling, analysis, inspection documentation and marking for five grades of ingot tin. The grades of tin included in this draft European Standard are those which are traded internationally.

  • Standard
    11 pages
    English language
    sale 10% off
    e-Library read for
    1 day
SIST
SIST EN 1774:1998(Main)
Zinc and zinc alloys - Alloys for foundry purposes - Ingot and liquid
EN 1774:1997

This European Standard specifies the designations, chemical compositions, marking and other requirements for zinc alloys, in ingots or liquid form, produced for foundry purposes.

  • Standard
    11 pages
    English language
    sale 10% off
    e-Library read for
    1 day
SIST
SIST EN 988:1998(Main)
Zinc and zinc alloys - Specifications for rolled flat products for building
EN 988:1996

This European Standard specifies requirements for rolled flat products for building purposes made from zinc-copper-titanium alloy, in the form of strip, sheet or cut length. It covers products in the range of 0.6 mm up to and including 1.0 mm thickness and from 100 mm up to and including 1000 mm width. This standard does not cover formed or shaped products or products prefabricated by any other means other than cutting or size.

  • Standard
    13 pages
    English language
    sale 10% off
    e-Library read for
    1 day
SIST
SIST EN 506:2008(Main)
Roofing products of metal sheet - Specification for self-supporting products of copper or zinc sheet
EN 506:2008

This European Standard specifies requirements for self-supporting roofing products for discontinuous laying made from copper or zinc-copper-titanium alloy sheet with or without additional organic coatings.
The standard establishes general characteristics, definitions and labelling for the products, together with requirements for the materials from which the products can be manufactured. It is intended to be used either by manufacturers to ensure that their products comply with the requirements or by purchasers to verify that the products comply before they are despatched from the factory. It specifies the requirements for products which enable them to meet all normal service conditions.
The standard applies to all discontinuously laid self-supporting external profiled sheets for roofing with the exception of tiles with a surface area less than 1 m2 and produced by stamping. These profiled roof sheets are designed to keep wind, rain and snow out of the building and to transfer any resultant loads and infrequent maintenance loads to the structure.
No requirements for supporting construction, design of roof system and execution of connections and flashings are included.

  • Standard
    35 pages
    English language
    sale 10% off
    e-Library read for
    1 day