Spices and condiments — Dried sumac — Specification

This document specifies requirements for rubbed form of dried sumac (Rhus coriaria, family Anacardiaceae). Recommendations relating to storage and transport conditions are given in Annex A.

Épices et condiments — Sumac séché — Spécifications

General Information

Status
Published
Publication Date
30-May-2022
Current Stage
6060 - International Standard published
Start Date
31-May-2022
Due Date
18-Sep-2022
Completion Date
31-May-2022
Ref Project

Buy Standard

Standard
ISO 24052:2022 - Spices and condiments — Dried sumac — Specification Released:5/31/2022
English language
9 pages
sale 15% off
Preview
sale 15% off
Preview

Standards Content (Sample)

INTERNATIONAL ISO
STANDARD 24052
First edition
2022-05
Spices and condiments — Dried sumac
— Specification
Épices et condiments — Sumac séché — Spécifications
Reference number
ISO 24052:2022(E)
© ISO 2022

---------------------- Page: 1 ----------------------
ISO 24052:2022(E)
COPYRIGHT PROTECTED DOCUMENT
© ISO 2022
All rights reserved. Unless otherwise specified, or required in the context of its implementation, no part of this publication may
be reproduced or utilized otherwise in any form or by any means, electronic or mechanical, including photocopying, or posting on
the internet or an intranet, without prior written permission. Permission can be requested from either ISO at the address below
or ISO’s member body in the country of the requester.
ISO copyright office
CP 401 • Ch. de Blandonnet 8
CH-1214 Vernier, Geneva
Phone: +41 22 749 01 11
Email: copyright@iso.org
Website: www.iso.org
Published in Switzerland
ii
  © ISO 2022 – All rights reserved

---------------------- Page: 2 ----------------------
ISO 24052:2022(E)
Contents Page
Foreword .iv
1 Scope . 1
2 Normative references . 1
3 Terms and definitions . 1
4 Requirements . 2
4.1 Odour and flavour . 2
4.2 Colour . 2
4.3 Fineness of dried sumac . 2
4.4 Physical and chemical requirements . 2
5 Sampling . 2
6 Method of test . 2
7 Packaging and marketing . 2
7.1 Packaging . 2
7.2 Marking . 2
Annex A (informative) Recommendations relating to storage and transport conditions .4
Annex B (normative) Detection and identification of artificial, water-soluble acidic
colorants — Thin layer chromatography method (TLCM). 5
iii
© ISO 2022 – All rights reserved

---------------------- Page: 3 ----------------------
ISO 24052:2022(E)
Foreword
ISO (the International Organization for Standardization) is a worldwide federation of national standards
bodies (ISO member bodies). The work of preparing International Standards is normally carried out
through ISO technical committees. Each member body interested in a subject for which a technical
committee has been established has the right to be represented on that committee. International
organizations, governmental and non-governmental, in liaison with ISO, also take part in the work.
ISO collaborates closely with the International Electrotechnical Commission (IEC) on all matters of
electrotechnical standardization.
The procedures used to develop this document and those intended for its further maintenance are
described in the ISO/IEC Directives, Part 1. In particular, the different approval criteria needed for the
different types of ISO documents should be noted. This document was drafted in accordance with the
editorial rules of the ISO/IEC Directives, Part 2 (see www.iso.org/directives).
Attention is drawn to the possibility that some of the elements of this document may be the subject of
patent rights. ISO shall not be held responsible for identifying any or all such patent rights. Details of
any patent rights identified during the development of the document will be in the Introduction and/or
on the ISO list of patent declarations received (see www.iso.org/patents).
Any trade name used in this document is information given for the convenience of users and does not
constitute an endorsement.
For an explanation of the voluntary nature of standards, the meaning of ISO specific terms and
expressions related to conformity assessment, as well as information about ISO’s adherence to
the World Trade Organization (WTO) principles in the Technical Barriers to Trade (TBT), see
www.iso.org/iso/foreword.html.
This document was prepared by Technical Committee ISO/TC 34, Food products, Subcommittee SC 7,
Spices, culinary herbs and condiments.
Any feedback or questions on this document should be directed to the user’s national standards body. A
complete listing of these bodies can be found at www.iso.org/members.html.
iv
  © ISO 2022 – All rights reserved

---------------------- Page: 4 ----------------------
INTERNATIONAL STANDARD ISO 24052:2022(E)
Spices and condiments — Dried sumac — Specification
1 Scope
This document specifies requirements for rubbed form of dried sumac (Rhus coriaria, family
Anacardiaceae).
Recommendations relating to storage and transport conditions are given in Annex A.
2 Normative references
The following documents are referred to in the text in such a way that some or all of their content
constitutes requirements of this document. For dated references, only the edition cited applies. For
undated references, the latest edition of the referenced document (including any amendments) applies.
ISO 927, Spices and condiments — Determination of extraneous matter and foreign matter content
ISO 928, Spices and condiments — Determination of total ash
ISO 930, Spices and condiments — Determination of acid-insoluble ash
ISO 939, Spices and condiments — Determination of moisture content
ISO 948, Spices and condiments — Sampling
ISO 2825, Spices and condiments — Preparation of a ground sample for analysis
3 Terms and definitions
For the purposes of this document, the following terms and definitions apply.
ISO and IEC maintain terminology databases for use in standardization at the following addresses:
— ISO Online browsing platform: available at https:// www .iso .org/ obp
— IEC Electropedia: available at https:// www .electropedia .org/
3.1
sumac
shrub or small tree belonging to the Anacardiaceae family
Note 1 to entry: Sumac can reach a height of 1 m to 5 m. The leaves are spirally arranged; they are usually pinnately
compound, though some species have trifoliate or simple leaves. There are two kinds of sumac according to the
area of cultivation: red and brown sumac.
Note 2 to entry: The flowers are in dense panicles or spikes 20 cm to 25 cm long. Each flower is very small, and
greenish, creamy white or red in colour, with five petals. The fruits form dense clusters of reddish drupes called
“sumac bobs”.
3.2
dried sumac
powder obtained by drying fruits from dense clusters of reddish drupes of Rhus coriaria of the
Anacardiaceae family
1
© ISO 2022 – All rights reserved

---------------------- Page: 5 ----------------------
ISO 24052:2022(E)
4 Requirements
4.1 Odour and flavour
Dried sumac shall have a characteristic odour and flavour. It shall be free from mustiness and other
foreign flavours.
4.2 Colour
The colour of dried sumac is red to brown. It shall be free from added colour.
4.3 Fineness of dried sumac
Dried sumac shall pass completely through a sieve of nominal aperture size 2 000 μm.
4.4 Physical and chemical requirements
Table 1 — Physical and chemical requirements for dried sumac
Characteristic Requirements Method of test
Moisture content (% mass fraction), max. 10,0 ISO 939
Total ash (% mass fraction) on dry basis, max. 13 ISO 928
Acid insoluble ash (% mass fraction), on dry basis, max. 1,5 ISO 930
Added colours (natural and artificial) Absent Annex B
Foreign matter Absent ISO 927
Extraneous matter (% mass fraction), on dry basis, max. 0,2 ISO 927
5 Sampling
Sample the dried sumac by the method specified in ISO 948. Sample preparation shall be in accordance
with ISO 2825.
6 Method of test
Samples of dried sumac shall be tested for conformity to the requirements of this document by the test
methods referred to in Table 1.
7 Packaging and marketing
7.1 Packaging
Dried sumac shall be packed in rigid, sealed, clean and sound containers made of material which cannot
affect the product quality and which protects it from env
...

Questions, Comments and Discussion

Ask us and Technical Secretary will try to provide an answer. You can facilitate discussion about the standard in here.