ISO 5415:1977
(Main)Reduction sleeves with 7/24 external and Morse internal taper and incorporated screw
Reduction sleeves with 7/24 external and Morse internal taper and incorporated screw
Lays down the dimensions of these reduction sleeves. Applies to 7/24 taper Nos. 30 - 40 - 45 - 50 and 60 and Morse taper Nos. 1 to 6. Morse tapers Nos. 4 - and 6 being either with positive drive (sleeves of type B) or without positive drive (sleeves of type A). These sleeves permit driving of tools with Morse taper shanks with tapped holes with the aid of an internal screw. The form of this screw and its fixation in the sleeve are left to the manufacturer' s discretion.
Douilles de réduction aux cônes extérieur 7/24 et intérieur Morse, avec vis incorporée
General Information
- Status
- Withdrawn
- Publication Date
- 28-Feb-1977
- Withdrawal Date
- 28-Feb-1977
- Technical Committee
- ISO/TC 29 - Small tools
- Drafting Committee
- ISO/TC 29 - Small tools
- Current Stage
- 9599 - Withdrawal of International Standard
- Start Date
- 26-Nov-2007
- Completion Date
- 12-Feb-2026
Relations
- Revised
ISO 5415:2007 - Reduction sleeves with 7/24 external and Morse internal taper and incorporated screw - Effective Date
- 15-Apr-2008
ISO 5415:1977 - Reduction sleeves with 7/24 external and Morse internal taper and incorporated screw
ISO 5415:1977 - Douilles de réduction aux cônes extérieur 7/24 et intérieur Morse, avec vis incorporée
ISO 5415:1977 - Douilles de réduction aux cônes extérieur 7/24 et intérieur Morse, avec vis incorporée
Get Certified
Connect with accredited certification bodies for this standard
National Aerospace and Defense Contractors Accreditation Program (NADCAP)
Global cooperative program for special process quality in aerospace.
CARES (UK Certification Authority for Reinforcing Steels)
UK certification for reinforcing steels and construction.
DVS-ZERT GmbH
German welding certification society.
Sponsored listings
Frequently Asked Questions
ISO 5415:1977 is a standard published by the International Organization for Standardization (ISO). Its full title is "Reduction sleeves with 7/24 external and Morse internal taper and incorporated screw". This standard covers: Lays down the dimensions of these reduction sleeves. Applies to 7/24 taper Nos. 30 - 40 - 45 - 50 and 60 and Morse taper Nos. 1 to 6. Morse tapers Nos. 4 - and 6 being either with positive drive (sleeves of type B) or without positive drive (sleeves of type A). These sleeves permit driving of tools with Morse taper shanks with tapped holes with the aid of an internal screw. The form of this screw and its fixation in the sleeve are left to the manufacturer' s discretion.
Lays down the dimensions of these reduction sleeves. Applies to 7/24 taper Nos. 30 - 40 - 45 - 50 and 60 and Morse taper Nos. 1 to 6. Morse tapers Nos. 4 - and 6 being either with positive drive (sleeves of type B) or without positive drive (sleeves of type A). These sleeves permit driving of tools with Morse taper shanks with tapped holes with the aid of an internal screw. The form of this screw and its fixation in the sleeve are left to the manufacturer' s discretion.
ISO 5415:1977 is classified under the following ICS (International Classification for Standards) categories: 25.060.20 - Dividing and tool-workpiece holding devices. The ICS classification helps identify the subject area and facilitates finding related standards.
ISO 5415:1977 has the following relationships with other standards: It is inter standard links to ISO 5415:2007. Understanding these relationships helps ensure you are using the most current and applicable version of the standard.
ISO 5415:1977 is available in PDF format for immediate download after purchase. The document can be added to your cart and obtained through the secure checkout process. Digital delivery ensures instant access to the complete standard document.
Standards Content (Sample)
INTERNATIONAL STANDARD
INTERNATIONAL ORGANIZATION FOR STANDARDIZATION l MEXJJYHAPOAHAII OPrAHM3AUM~ l-l0 CI-AHLIAPTM3AUMW-ORGANISATION INTERNATIONALE DE NORMALISATION
Reduction sleeves with 7/24 external and Morse internal tape
and incorporated screw
Douilles de r6duction aux ches ext6rieur 7/24 et intkieur Morse, avec vis incorpor&e
First edition - 1977-03-15
w
-
Ref. No. ISO 5415-1977 (IE)
UDC 621.9-229.2
Morse taper shan ks, adapter sleeves, specifications, dimensions.
Descriptors : tools, power-operated tools,
Price based on 2 pages
ISO (the International Organization for Standardization) is a worldwide federation
of national Standards institutes (ISO member bodies). The work of developing
International Standards is carried out through ISO technical committees. Every
member body interested in a subject for which a technical committee has been set
up has the right to be represented on that committee. International organizations,
governmental and non-governmental, in liaison with ISO, also take part in the work.
Draft International Standards adopted by the technical committees are circulated
to the member bodies for approval before their acceptance as International
Standards by the ISO Council.
International Standard ISO 5415 was developed by Technical Committee
lSO/TC 29, Small tools, and was circulated to the member bodies in March 1976.
lt has been approved by the member bodies of the following countries :
Austral ia Hungary Romania
Austria India South Africa, Rep. of
Belgium Israel Spain
Brazil I taly Switzerland
Bulgaria Japan Turkey
Czechoslovakia Mexico United Kingdom
France Netherlands U.S.S. R.
Germany Philippines Yugoslavia
No member body expressed disapproval of the document.
0 International Organization for Standardkation, 1977 l
Printed in Switzerland
ISO 5415-1977 (El
INTERNATIONAL STANDARD
Reduction
...
NORME INTERNATIONALE
INTERNATIONAL ORGANIZATION FOR STANDARDIZATION 44EXAYHAPOAHA5i OPrAHW3AW’III n0 CTAH~APTH3ALVIW*ORGANlSATION INTERNATIONALE DE NORMALISATION
Douilles de réduction aux cônes extérieur 7/24 et
intérieur Morse, avec vis incorporée
Reduction sleeves wïth 7R4 external and Morse interna/ taper and incorporated screw
Première édition - 1977-03-15
CDU 621.9-229.2
Réf. n* : ISO 54154977 (F)
Descrip~ws : outil, outil mécanique, queue cône Morse, douille de hduction, spécification, dimension.
Prix basé sur 2 pages
AVANT-PROPOS
L’ISO (Organisation internationale de normalisation) est une fédération mondiale
d’organismes nationaux de normalisation (comités membres de I’ISO). L’élaboration
des Normes internationales est confiée aux comités techniques de I’ISO. Chaque
comité membre intéressé par une étude a le droit de faire partiedu comité technique
correspondant. Les organisations internationales, gouvernementales et non
gouvernementales, en liaison avec I’ISO, participent également aux travaux.
Les projets de Normes internationales adoptés par les comités techniques sont
soumis aux comités membres pour approbation, avant leur acceptation comme
Normes internationales par le Conseil de I’ISO.
La Norme internationale ISO 5415 a été élaborée par le comité technique
ISO/TC 29, Petit ouMage, et a été soumise aux comités membres en mars 1976.
Les comités membres des pays suivants l’ont approuvée :
Afrique du Sud France Philippines
Hongrie Roumanie
Allemagne
Inde Royaume-Uni
Australie
Israël Suisse
Au triche
Italie Tchécoslovaquie
Belgique
Brésil Japon Turquie
Bulgarie Mexique U.R.S.S.
Pays-Bas
Espagne Yougoslavie
Aucun comité membre ne l’a désapprouvée.
@ Organisation internationale de normalisation, 1977 l
Imprimé en Suisse
NORME INTERNATIONALE ISO 5415-1977 (F)
Douilles de réduction aux cônes extérieur 7/24 et
intérieur Morse, av
...
NORME INTERNATIONALE
INTERNATIONAL ORGANIZATION FOR STANDARDIZATION 44EXAYHAPOAHA5i OPrAHW3AW’III n0 CTAH~APTH3ALVIW*ORGANlSATION INTERNATIONALE DE NORMALISATION
Douilles de réduction aux cônes extérieur 7/24 et
intérieur Morse, avec vis incorporée
Reduction sleeves wïth 7R4 external and Morse interna/ taper and incorporated screw
Première édition - 1977-03-15
CDU 621.9-229.2
Réf. n* : ISO 54154977 (F)
Descrip~ws : outil, outil mécanique, queue cône Morse, douille de hduction, spécification, dimension.
Prix basé sur 2 pages
AVANT-PROPOS
L’ISO (Organisation internationale de normalisation) est une fédération mondiale
d’organismes nationaux de normalisation (comités membres de I’ISO). L’élaboration
des Normes internationales est confiée aux comités techniques de I’ISO. Chaque
comité membre intéressé par une étude a le droit de faire partiedu comité technique
correspondant. Les organisations internationales, gouvernementales et non
gouvernementales, en liaison avec I’ISO, participent également aux travaux.
Les projets de Normes internationales adoptés par les comités techniques sont
soumis aux comités membres pour approbation, avant leur acceptation comme
Normes internationales par le Conseil de I’ISO.
La Norme internationale ISO 5415 a été élaborée par le comité technique
ISO/TC 29, Petit ouMage, et a été soumise aux comités membres en mars 1976.
Les comités membres des pays suivants l’ont approuvée :
Afrique du Sud France Philippines
Hongrie Roumanie
Allemagne
Inde Royaume-Uni
Australie
Israël Suisse
Au triche
Italie Tchécoslovaquie
Belgique
Brésil Japon Turquie
Bulgarie Mexique U.R.S.S.
Pays-Bas
Espagne Yougoslavie
Aucun comité membre ne l’a désapprouvée.
@ Organisation internationale de normalisation, 1977 l
Imprimé en Suisse
NORME INTERNATIONALE ISO 5415-1977 (F)
Douilles de réduction aux cônes extérieur 7/24 et
intérieur Morse, av
...
Questions, Comments and Discussion
Ask us and Technical Secretary will try to provide an answer. You can facilitate discussion about the standard in here.
Loading comments...