Welding consumables — Test methods — Part 1: Test methods for all-weld metal test specimens in steel, nickel and nickel alloys — Amendment 1

Produits consommables pour le soudage — Méthodes d'essai — Partie 1: Méthodes d'essai pour les éprouvettes de métal fondu hors dilution pour le soudage de l'acier, du nickel et des alliages de nickel — Amendement 1

General Information

Status
Withdrawn
Publication Date
28-Sep-2011
Withdrawal Date
28-Sep-2011
ICS
25.160.20 - Welding consumables
Technical Committee
ISO/TC 44/SC 3 - Welding consumables
Drafting Committee
ISO/TC 44/SC 3 - Welding consumables
Current Stage
9599 - Withdrawal of International Standard
Start Date
20-Aug-2020
Completion Date
12-Feb-2026

Relations

Referred By
EN ISO 18275:2012 - Welding consumables - Covered electrodes for manual metal arc welding of high-strength steels - Classification (ISO 18275:2011)
Effective Date
09-Feb-2026
Referred By
EN ISO 17634:2015 - Welding consumables - Tubular cored electrodes for gas shielded metal arc welding of creep-resisting steels - Classification (ISO 17634:2015)
Effective Date
09-Feb-2026
Consolidates
EN ISO 15792-1:2008/A1:2011 - Welding consumables - Test methods - Part 1: Test methods for all-weld metal test specimens in steel, nickel and nickel alloys (ISO 15792-1:2000/Amd 1:2011)
Effective Date
12-Feb-2026
Consolidates
ISO 21148:2005 - Cosmetics — Microbiology — General instructions for microbiological examination
Effective Date
06-Jun-2022
Amends
ISO 15792-1:2000 - Welding consumables — Test methods — Part 1: Test methods for all-weld metal test specimens in steel, nickel and nickel alloys
Effective Date
28-Oct-2020
Revised
ISO 15792-1:2020 - Welding consumables — Test methods — Part 1: Preparation of all-weld metal test pieces and specimens in steel, nickel and nickel alloys
Effective Date
23-Apr-2020

Get Certified

Connect with accredited certification bodies for this standard

National Aerospace and Defense Contractors Accreditation Program (NADCAP)

Global cooperative program for special process quality in aerospace.

ANAB United States Verified
Visit Website

CARES (UK Certification Authority for Reinforcing Steels)

UK certification for reinforcing steels and construction.

UKAS United Kingdom Verified
Visit Website

DVS-ZERT GmbH

German welding certification society.

DAKKS Germany Verified
Visit Website

Sponsored listings

Frequently Asked Questions

ISO 15792-1:2000/Amd 1:2011 is a standard published by the International Organization for Standardization (ISO). Its full title is "Welding consumables — Test methods — Part 1: Test methods for all-weld metal test specimens in steel, nickel and nickel alloys — Amendment 1". This standard covers: Welding consumables — Test methods — Part 1: Test methods for all-weld metal test specimens in steel, nickel and nickel alloys — Amendment 1

Welding consumables — Test methods — Part 1: Test methods for all-weld metal test specimens in steel, nickel and nickel alloys — Amendment 1

ISO 15792-1:2000/Amd 1:2011 is classified under the following ICS (International Classification for Standards) categories: 25.160.20 - Welding consumables. The ICS classification helps identify the subject area and facilitates finding related standards.

ISO 15792-1:2000/Amd 1:2011 has the following relationships with other standards: It is inter standard links to EN ISO 18275:2012, EN ISO 17634:2015, EN ISO 15792-1:2008/A1:2011, ISO 21148:2005, ISO 15792-1:2000, ISO 15792-1:2020. Understanding these relationships helps ensure you are using the most current and applicable version of the standard.

ISO 15792-1:2000/Amd 1:2011 is available in PDF format for immediate download after purchase. The document can be added to your cart and obtained through the secure checkout process. Digital delivery ensures instant access to the complete standard document.

Standards Content (Sample)


INTERNATIONAL ISO
STANDARD 15792-1
First edition
2000-12-15
AMENDMENT 1
2011-10-01
Welding consumables — Test methods —
Part 1:
Test methods for all-weld metal test
specimens in steel, nickel and nickel
alloys
AMENDMENT 1
Produits consommables pour le soudage — Méthodes d'essai —
Partie 1: Méthodes d'essai pour les éprouvettes de métal fondu hors
dilution pour le soudage de l'acier, du nickel et des alliages de nickel
AMENDEMENT 1
Reference number
ISO 15792-1:2000/Amd.1:2011(E)
©
ISO 2011
ISO 15792-1:2000/Amd.1:2011(E)

©  ISO 2011
All rights reserved. Unless otherwise specified, no part of this publication may be reproduced or utilized in any form or by any means,
electronic or mechanical, including photocopying and microfilm, without permission in writing from either ISO at the address below or
ISO's member body in the country of the requester.
ISO copyright office
Case postale 56  CH-1211 Geneva 20
Tel. + 41 22 749 01 11
Fax + 41 22 749 09 47
E-mail copyright@iso.org
Web www.iso.org
Published in Switzerland
ii © ISO 2011 – All rights reserved

ISO 15792-1:2000/Amd.1:2011(E)
Foreword
ISO (the International Organization for Standardization) is a worldwide federation of national standards bodies
(ISO member bodies). The work of preparing International Standards is normally carried out through ISO
technical committees. Each member body interested in a subject for which a technical committee has been
established has the right to be represented on that committee. International organizations, governmental and
non-governmental, in liaison with ISO, also take part in the work. ISO collaborates closely with the
International Electrotechnical Commission (IEC) on all matters of electrotechnical standardization.
International Standards are d
...


NORME ISO
INTERNATIONALE 15792-1
Première édition
2000-12-15
AMENDEMENT 1
2011-10-01
Produits consommables pour le
soudage — Méthodes d'essai
Partie 1:
Méthodes d'essai pour les éprouvettes
de métal fondu hors dilution pour
le soudage de l'acier, du nickel et
des alliages de nickel
AMENDEMENT 1
Welding consumables — Test methods —
Part 1: Test methods for all-weld metal test specimens in steel, nickel
and nickel alloys
AMENDMENT 1
Numéro de référence
ISO 15792-1:2000/Amd.1:2011(F)
©
ISO 2011
ISO 15792-1:2000/Amd.1:2011(F)

DOCUMENT PROTÉGÉ PAR COPYRIGHT

©  ISO 2011
Droits de reproduction réservés. Sauf prescription différente, aucune partie de cette publication ne peut être reproduite ni utilisée sous
quelque forme que ce soit et par aucun procédé, électronique ou mécanique, y compris la photocopie et les microfilms, sans l'accord écrit
de l'ISO à l'adresse ci-après ou du comité membre de l'ISO dans le pays du demandeur.
ISO copyright office
Case postale 56  CH-1211 Geneva 20
Tel. + 41 22 749 01 11
Fax + 41 22 749 09 47
E-mail copyright@iso.org
Web www.iso.org
Publié en Suisse
ii © ISO 2011 – Tous droits réservés

ISO 15792-1:2000/Amd.1:2011(F)
Avant-propos
L'ISO (Organisation internationale de normalisation) est une fédération mondiale d'organismes nationaux de
normalisation (comités membres de l'ISO). L'élaboration des Normes internationales est en général confiée
aux comités techniques de l'ISO. Chaque comité membre intéressé par une étude a le droit de faire partie du
comité technique créé à cet effet. Les organisations internationales, gouvernementales et non
gouvernementales, en liaison avec l'ISO participent également aux travaux. L'ISO collabore étroitement avec
la Commission électrotechnique internationale (CEI) en ce qui concerne la normalisation électrotechnique.
Les Normes internationales sont rédigées conformément aux règles données dans les Directives ISO/CEI,
Partie 2.
La tâche principale des comités techniques est d'élaborer les Normes inter
...

Questions, Comments and Discussion

Ask us and Technical Secretary will try to provide an answer. You can facilitate discussion about the standard in here.

Loading comments...