ISO/IEC 15962:2022
(Main)Information technology — Radio frequency identification (RFID) for item management — Data protocol: data encoding rules and logical memory functions
Information technology — Radio frequency identification (RFID) for item management — Data protocol: data encoding rules and logical memory functions
This document focuses on encoding the transfer syntax of the application commands defined in ISO/IEC 15961-1. The encodation is in a Logical Memory as a software analogue of the physical memory of the RFID tag being addressed by the interrogator. This document — defines the encoded structure of object identifiers; — specifies the data compaction rules that apply to the encoded data; — specifies a Precursor for encoding syntax features efficiently; — specifies formatting rules for the data, e.g. depending on whether a directory is used or not; — defines how application commands, e.g. to lock data, are transferred to the Tag Driver; — specifies processes associated with sensory information and the transfers to the Tag Driver; — defines other communication to the application.
Technologies de l'information — Identification par radiofréquence (RFID) pour la gestion d'objets — Protocole de données: règles d'encodage des données et fonctions logiques de mémoire
General Information
Relations
Standards Content (Sample)
INTERNATIONAL ISO/IEC
STANDARD 15962
Third edition
2022-01
Information technology — Radio
frequency identification (RFID) for
item management — Data protocol:
data encoding rules and logical
memory functions
Technologies de l'information — Identification par radiofréquence
(RFID) pour la gestion d'objets — Protocole de données: règles
d'encodage des données et fonctions logiques de mémoire
Reference number
ISO/IEC 15962:2022(E)
© ISO/IEC 2022
---------------------- Page: 1 ----------------------
ISO/IEC 15962:2022(E)
COPYRIGHT PROTECTED DOCUMENT
© ISO/IEC 2022
All rights reserved. Unless otherwise specified, or required in the context of its implementation, no part of this publication may
be reproduced or utilized otherwise in any form or by any means, electronic or mechanical, including photocopying, or posting on
the internet or an intranet, without prior written permission. Permission can be requested from either ISO at the address below
or ISO’s member body in the country of the requester.
ISO copyright office
CP 401 • Ch. de Blandonnet 8
CH-1214 Vernier, Geneva
Phone: +41 22 749 01 11
Email: copyright@iso.org
Website: www.iso.org
Published in Switzerland
ii
© ISO/IEC 2022 – All rights reserved
---------------------- Page: 2 ----------------------
ISO/IEC 15962:2022(E)
Contents Page
Foreword .ix
Introduction .x
1 Scope . 1
2 Normative references . 1
3 Terms and definitions and abbreviated terms . 1
3.1 Terms and definitions . 1
3.2 Abbreviated terms . 2
4 Conformance . 2
4.1 Conformance with the air interface . . 2
4.2 Conformance with the application interface . 2
4.2.1 Encoders and the application interface. 2
4.2.2 Decoders and the application interface . 3
4.2.3 Comprehensive encoder/decoder devices and the application interface . 3
4.3 Conformance with the Access-Method . 3
4.3.1 Encoders and the Access-Method . 3
4.3.2 Decoders and the Access-Method . 3
4.3.3 Comprehensive encoder/decoder devices and the Access-Method . 3
5 Protocol model . 3
5.1 Overview . 3
5.2 Layered protocol .
...
Questions, Comments and Discussion
Ask us and Technical Secretary will try to provide an answer. You can facilitate discussion about the standard in here.