iTeh Standards logo
EURUSD
Your shopping cart is empty.
ISO

ISO/TR 11071-2:1996/Amd 1:1999

(Amendment)

Comparison of worldwide lift safety standards - Part 2: Hydraulic lifts (elevators) - Amendment 1: Reference to Japanese and Australian standards

Comparison of worldwide lift safety standards - Part 2: Hydraulic lifts (elevators) - Amendment 1: Reference to Japanese and Australian standards

Comparaison des normes mondiales de sécurité des ascenseurs — Partie 2: Ascenseurs hydrauliques — Amendement 1: Référence aux normes japonaises et australiennes

General Information

Status
Withdrawn
Publication Date
11-Aug-1999
Withdrawal Date
11-Aug-1999
ICS
91.140.90 - Lifts. Escalators
Technical Committee
ISO/TC 178 - Lifts, escalators and moving walks
Drafting Committee
ISO/TC 178/WG 4 - Safety requirements and risk assessment
Current Stage
9599 - Withdrawal of International Standard
Start Date
19-Apr-2006
Completion Date
13-Dec-2025
Ref Project

Relations

Amends
ISO/TR 11071-2:1996 - Comparison of worldwide lift safety standards - Part 2: Hydraulic lifts (elevators)
Effective Date
06-Jun-2022
Revised
ISO/TR 11071-2:2006 - Comparison of worldwide lift safety standards - Part 2: Hydraulic lifts (elevators)
Effective Date
15-Apr-2008
Child
SIST ISO/TR 11071-2:1999 - Comparison of worldwide lift safety standards -- Part 2: Hydraulic lifts (elevators)
Effective Date
14-Aug-2008
Child
ISO/TR 11071-2:1996 - Comparison of worldwide lift safety standards - Part 2: Hydraulic lifts (elevators)
Effective Date
15-Apr-2008
ISO/TR 11071-2:1996/Amd 1:1999 - Reference to Japanese and Australian standardsISO/TR 11071-2:1996/Amd 1:1999 - Reference to Japanese and Australian standards
PreviousNext
Technical report
ISO/TR 11071-2:1996/Amd 1:1999 - Reference to Japanese and Australian standards
English language
31 pages
sale 15% off
Preview
sale 15% off
Preview

Frequently Asked Questions

ISO/TR 11071-2:1996/Amd 1:1999 is a technical report published by the International Organization for Standardization (ISO). Its full title is "Comparison of worldwide lift safety standards - Part 2: Hydraulic lifts (elevators) - Amendment 1: Reference to Japanese and Australian standards". This standard covers: Comparison of worldwide lift safety standards - Part 2: Hydraulic lifts (elevators) - Amendment 1: Reference to Japanese and Australian standards

Comparison of worldwide lift safety standards - Part 2: Hydraulic lifts (elevators) - Amendment 1: Reference to Japanese and Australian standards

ISO/TR 11071-2:1996/Amd 1:1999 is classified under the following ICS (International Classification for Standards) categories: 91.140.90 - Lifts. Escalators. The ICS classification helps identify the subject area and facilitates finding related standards.

ISO/TR 11071-2:1996/Amd 1:1999 has the following relationships with other standards: It is inter standard links to ISO/TR 11071-2:1996, ISO/TR 11071-2:2006; is excused to SIST ISO/TR 11071-2:1999, ISO/TR 11071-2:1996. Understanding these relationships helps ensure you are using the most current and applicable version of the standard.

You can purchase ISO/TR 11071-2:1996/Amd 1:1999 directly from iTeh Standards. The document is available in PDF format and is delivered instantly after payment. Add the standard to your cart and complete the secure checkout process. iTeh Standards is an authorized distributor of ISO standards.

Standards Content (Sample)


TECHNICAL ISO/TR
REPORT 11071-2
First edition
1996-12-15
AMENDMENT 1
1999-08-01
Comparison of worldwide lift safety
standards —
Part 2:
Hydraulic lifts (elevators)
AMENDMENT 1: Reference to Japanese and
Australian standards
Comparaison des normes mondiales de sécurité des ascenseurs —
Partie 2: Ascenseurs hydrauliques
AMENDEMENT 1: Référence aux normes japonaises et australiennes
�
Reference number
ISO 4824:1993/Amd.1:1999(E)
ISO/TR 11071-2:1996/Amd.1:1999(E)
© ISO 1999
All rights reserved. Unless otherwise specified, no part of this publication may be reproduced or utilized in any form or by any means, electronic
or mechanical, including photocopying and microfilm, without permission in writing from the publisher.
International Organization for Standardization
Case postale 56 � CH-1211 Genève 20 � Switzerland
Internet iso@iso.ch
Printed in Switzerland
ii
© ISO
ISO/TR 11071-2:1996/Amd.1:1999(E)
iii
© ISO
ISO/TR 11071-2:1996/Amd.1:1999(E)
iv
©
ISO
ISO/TR 11071-2:1996/Amd.1:1999(E)
Comparison of worldwide lift safety standards —
Part 2:
Hydraulic lifts (elevators)
AMENDMENT 1: Reference to Japanese and Australian standards
©
ISO
ISO/TR 11071-2:1996/Amd.1:1999(E)
©
ISO
ISO/TR 11071-2:1996/Amd.1:1999(E)
©
ISO
ISO/TR 11071-2:1996/Amd.1:1999(E)
©
ISO
ISO/TR 11071-2:1996/Amd.1:1999(E)
©
ISO
ISO/TR 11071-2:1996/Amd.1:1999(E)
©
ISO
ISO/TR 11071-2:1996/Amd.1:1999(E)
©
ISO
ISO/TR 11071-2:1996/Amd.1:1999(E)
©
ISO
ISO/TR 11071-2:1996/Amd.1:1999(E)
©
ISO
ISO/TR 11071-2:1996/Amd.1:1999(E)
...

Questions, Comments and Discussion

Ask us and Technical Secretary will try to provide an answer. You can facilitate discussion about the standard in here.

Loading comments...

This May Also Interest You

ISO
ISO/TS 8100-10:2025(Main)
Lifts for the transport of persons and goods - Part 10: Building Information Modelling

This document defines minimum specific elements required for BIM process with new lifts. It does not define the BIM process itself. This document specifies a minimum set of information for lifts following the structure of ISO 7817-1, for the purpose of building planning during pre-design stage, schematic design stage and detailed design stage of a building. It covers the geometrical information and the alphanumerical information. NOTE The BIM processes are defined in ISO/TC 59/SC 13 standards. This document does not cover requirements during other stages (information delivery milestones) and the documentation. This document does not cover definition of actors, which are project specific. The definitions are for a single lift. This document does not describe the structures required for multiple lifts in the same building. This document describes the information of a lift and its interfaces to the building which are relevant for the planning of the building. The structural forces are out of the scope of this document. This document is not applicable to lifts, which are installed before the date of its publication.

  • Technical specification
    14 pages
    English language
    sale 15% off
ISO
ISO/TR 25741-1:2025(Main)
Lifts and escalators subject to seismic conditions - Compilation report - Part 1: Rule by rule comparison

This document compares the requirements of selected topics as covered by the following seismic standards (excluding local deviations): a) EN 81-77:2018 (EU); b) ASME 17.1 16 CH 8.4 (USA) / CSA B44-16 CH 8.4 (CAN); c) NZS 4332-1997, NZS1170.5-2004 (NZ); d) AS 1735.1:2016, AS 1735.5 :2001 (AUS); e) BSLJ / GFS:2016 (Japan).

  • Technical report
    56 pages
    English language
    sale 15% off
ISO
ISO/TR 8101-10:2024(Main)
Fire safety on lifts - Part 10: Comparison of safety standards worldwide on lifts used by firefighters and for building evacuation

This document consists of an updated comparison of the requirements of selected topics pertaining to the use of lifts for firefighting and building evacuation, as covered by worldwide safety standards. This document applies to electric traction lifts only, although some sections are also applicable for positive drive lifts and other lifts suspended by rope or chain.

  • Technical report
    106 pages
    English language
    sale 15% off
ISO
ISO 8100-7:2024(Main)
Lifts for the transport of persons and goods - Part 7: Accessibility to lifts for persons including persons with disability

This document specifies the minimum requirements for the safe and independent access and use of lifts by persons, including persons with disabilities. It covers the needs of persons with disabilities according to Annex A. NOTE For guidance on solutions for increased accessibility and usability, see Annex D. This document is not applicable to lifts installed before the date of its publication.

  • Standard
    25 pages
    English language
    sale 15% off
ISO
ISO 8103-1:2024(Main)
Escalators and moving walks - Part 1: Safety requirements

This document is applicable for new escalators and moving walks (pallet or belt type) as defined in Clause 3. This document deals with all significant hazards, hazardous situations, and events relevant to escalators and moving walks when they are used as intended and under conditions of misuse which are reasonably foreseeable by the manufacturer (see Clause 4). This document is not applicable to escalators and moving walks which were manufactured before the date of its publication. It is, however, recommended that existing installations be adapted to this document.

  • Standard
    97 pages
    English language
    sale 15% off
  • Standard
    107 pages
    French language
    sale 15% off
ISO
ISO/TS 8100-22:2024(Main)
Lifts for the transport of persons and goods - Part 22: Prerequisites for certification of lifts, model lifts, lift components and lift functions

This document specifies prerequisite requirements for application for the certification of new lifts (elevators), model lifts, lift components and lift functions. NOTE Hereinafter in this document, the term “lift” is used instead of the term “elevator”.

  • Technical specification
    9 pages
    English language
    sale 15% off
ISO
ISO/TS 8100-23:2024(Main)
Lifts for the transport of persons and goods - Part 23: Requirements for bodies certifying lifts, model lifts, lift components and lift functions

This document specifies requirements for conformity assessment bodies (CABs) performing certification of new lifts (elevators), model lifts, lift components and lift functions. NOTE Hereinafter in this document, the term “lift” is used instead of the term “elevator”.

  • Technical specification
    8 pages
    English language
    sale 15% off
ISO
ISO 25745-2:2015/Amd 1:2023(Amendment)
Energy performance of lifts, escalators and moving walks - Part 2: Energy calculation and classification for lifts (elevators) - Amendment 1: Express zones
  • Standard
    2 pages
    English language
    sale 15% off
  • Standard
    2 pages
    French language
    sale 15% off
ISO
ISO 25745-1:2023(Main)
Energy performance of lifts, escalators and moving walks - Part 1: Energy measurement and verification

This document specifies: a) methods of measuring actual energy consumption of lifts, escalators and moving walks on a single unit basis; b) methods of carrying out periodic energy verification checks on lifts, escalators and moving walks in operation. This document only considers the energy performance during the operational portion of the life cycle of the lifts, escalators or moving walks. For lifts, this document does not cover energy aspects, such as: a) hoistway lighting; b) heating and cooling equipment, including fans in the lift car; c) machine room lighting; d) machine room heating, ventilation and air conditioning; e) non-lift, display systems, closed circuit television security cameras, etc.; f) non-lift, monitoring systems (building management systems, etc.); g) the effect of lift group dispatching on energy consumption; h) non-lift equipment consumption through the power sockets; i) energy storage systems if used as an alternative energy source for operation. For escalators and moving walks, this document does not cover energy aspects of the ancillary equipment, such as: a) lighting with the exception of comb plate lighting and step gap lighting and traffic light; b) cooling and heating; c) alarm devices and emergency battery supplies equipment, etc.

  • Standard
    16 pages
    English language
    sale 15% off
  • Standard
    17 pages
    French language
    sale 15% off
ISO
ISO/TR 14799-2:2023(Main)
Comparison of worldwide escalator and moving walk safety standards - Part 2: Abbreviated comparison and comments

This document consists of a comparison of the requirements of selected topics as covered by the following worldwide safety standards (excluding local deviations): a) Europe (CEN) – EN 115‑1:2017, Safety of escalators and moving walks - Part 1: Construction and installation; b) North America - ASME A17.1/CSA B44:2016, Safety Code for Elevators and Escalators; c) Japan – Safety requirements mainly comprised of Building Standard Law Enforcement Order (BSLJ-EO), Notifications of Ministry of Construction (MOC-N), and Japan Elevator Association Standard (JEAS).

  • Technical report
    143 pages
    English language
    sale 15% off