iTeh StandardsiTeh Standards
EURUSD
Your shopping cart is empty.
ISO

ISO 13613:2011

(Main)

Ships and marine technology — Maintenance and testing to reduce losses in critical systems for propulsion

Ships and marine technology — Maintenance and testing to reduce losses in critical systems for propulsion

ISO 13613:2011 provides shipboard personnel and other parties information concerning operational maintenance and testing for certain critical systems. Proper maintenance of these systems can help reduce the risk of ship propulsion and manoeuvrability losses.

Navires et technologie maritime — Maintenance et essais pour réduire les pertes dans les systèmes critiques pour la propulsion

General Information

Status
Published
Publication Date
22-Nov-2011
ICS
47.020.20 - Marine engines and propulsion systems
Technical Committee
ISO/TC 8/SC 3 - Piping and machinery
Drafting Committee
ISO/TC 8/SC 3 - Piping and machinery
Current Stage
9093 - International Standard confirmed
Completion Date
06-Jun-2024
Ref Project

Buy Standard

ISO 13613:2011 - Ships and marine technology -- Maintenance and testing to reduce losses in critical systems for propulsionISO 13613:2011 - Ships and marine technology -- Maintenance and testing to reduce losses in critical systems for propulsion
PreviousNext
Standard
ISO 13613:2011 - Ships and marine technology -- Maintenance and testing to reduce losses in critical systems for propulsion
English language
14 pages
sale 15% off
Preview
sale 15% off
Preview

Standards Content (Sample)

INTERNATIONAL ISO
STANDARD 13613
First edition
2011-12-01
Ships and marine technology —
Maintenance and testing to reduce losses
in critical systems for propulsion
Navires et technologie maritime — Maintenance et essais pour réduire
les pertes dans les systèmes critiques pour la propulsion
Reference number
ISO 13613:2011(E)
©
ISO 2011

---------------------- Page: 1 ----------------------
ISO 13613:2011(E)
COPYRIGHT PROTECTED DOCUMENT
© ISO 2011
All rights reserved. Unless otherwise specified, no part of this publication may be reproduced or utilized in any form or by any means,
electronic or mechanical, including photocopying and microfilm, without permission in writing from either ISO at the address below or ISO’s
member body in the country of the requester.
ISO copyright office
Case postale 56 • CH-1211 Geneva 20
Tel. + 41 22 749 01 11
Fax + 41 22 749 09 47
E-mail copyright@iso.org
Web www.iso.org
Published in Switzerland
ii © ISO 2011 – All rights reserved

---------------------- Page: 2 ----------------------
ISO 13613:2011(E)
Contents Page
Foreword .iv
0 Introduction . v
0.1 General .vi
0.2 Air start system failure . vi
0.3 Fuel oil quality problems . vi
0.4 Fuel switching . vi
0.5 Informative annexes . vi
1 Scope . 1
2 Terms and definitions . 1
3 Technical information and recommendations . 1
3.1 General maintenance of ship systems . 1
3.2 Compressed air systems maintenance . 2
3.3 Fuel oil system maintenance . 3
3.4 Maintenance and testing of ship automation systems . 6
Annex A (informative) Example maintenance items for compressed air systems . 7
Annex B (informative) Sample record of periodic maintenance procedures . 8
Annex C (informative) Example diagram of engine fuel supply and switching system . 9
Annex D (informative) Recommendations for lubricating oil systems .10
Annex E (informative) Recommendations for other common engineering system components . 11
Annex F (informative) Marine fuel characteristics (see also ISO 8217) .12
Annex G (informative) Marine residual fuel characteristics (see also ISO 8217) .13
Bibliography .14
© ISO 2011 – All rights reserved iii

---------------------- Page: 3 ----------------------
ISO 13613:2011(E)
Foreword
ISO (the International Organization for Standardization) is a worldwide federation of national standards bodies
(ISO member bodies). The work of preparing International Standards is normally carried out through ISO
technical committees. Each member body interested in a subject for which a technical committee has been
established has the right to be represented on that committee. International organizations, governmental and
non-governmental, in liaison with ISO, also take part
...

Questions, Comments and Discussion

Ask us and Technical Secretary will try to provide an answer. You can facilitate discussion about the standard in here.

This May Also Interest You

ISO
ISO 484-1:2015(Main)
Shipbuilding — Ship screw propellers — Manufacturing tolerances — Part 1: Propellers of diameter greater than 2,50 m

ISO 484-1:2015 defines manufacturing tolerances of ship screw propellers of a diameter greater than 2,50 m. NOTE Some deviations for the tolerance are permitted in certain cases subject to the discretion of the customer or of the designer and the customer.

  • Standard
    13 pages
    English language
    sale 15% off
ISO
ISO 484-2:2015(Main)
Shipbuilding — Ship screw propellers — Manufacturing tolerances — Part 2: Propellers of diameter between 0,80 and 2,50 m inclusive

ISO 484-2:2015 defines manufacturing tolerances of ship screw propellers of a diameter between 0,80 m and 2,50 m. NOTE Some deviations for the tolerance are permitted in certain cases subject to the discretion of the customer or of the designer and the customer.

  • Standard
    13 pages
    English language
    sale 15% off
ISO
ISO 18770:2005(Main)
Ships and marine technology — Machinery-space flammable oil systems — Prevention of leakage of flammable oil

ISO 18770:2005 specifies the measures to be taken to reduce fires originating from machinery-space flammable oil systems and to prevent leakage of flammable oil. It is intended for designers, shipyard personnel, engine-room personnel, owners, operators and maintenance personnel. Requirements contained herein address the design, construction, testing, installation, maintenance and inspection of systems containing flammable oil. ISO 18770:2005 is applicable to new and existing vessels, and is intended to be used as a supplement to the regulations for fuel oil, lubricating oil and other flammable oils contained in the International Convention for the Safety of Life At Sea (SOLAS 74), as amended, issued by the International Maritime Organization (IMO).

  • Standard
    17 pages
    English language
    sale 15% off
  • Standard
    18 pages
    Russian language
    sale 15% off
ISO
ISO 3715-1:2002(Main)
Ships and marine technology — Propulsion plants for ships — Part 1: Vocabulary for geometry of propellers

This part of ISO 3715 gives terms and definitions for screw propellers used in the propulsion plants of ships and other vessels (such as mobile offshore drilling units) that are self-propelled or propulsion-assisted. The definitions are valid only for the hydrodynamically effective part of the propeller. No definitions are given for the mechanical construction of the hub.

  • Standard
    16 pages
    English language
    sale 15% off
ISO
ISO 3715-2:2001(Main)
Ships and marine technology — Propulsion plants for ships — Part 2: Vocabulary for controllable-pitch propeller plants

This part of ISO 3715 gives terms and definitions applicable exclusively to continuously variable and hydraulic operated controllable-pitch propeller units. It does not cover controllable-pitch propeller units for which only a few specified pitch settings apply. General vocabulary for the geometry of screw propellers is given in ISO 3715-1 and is also valid for controllablepitch propellers.

  • Standard
    8 pages
    English language
    sale 15% off
ISO
ISO 4679:2023(Main)
Ships and marine technology — Hydraulic performance tests for waterjet propulsion system

This document specifies the measurement and acceptance criteria and the test report of hydraulic performance tests for waterjet propulsion system of Class A and Class B. The test methods for the waterjet propulsion pump with and without the inlet duct are both specified. This document is applicable to the hydraulic performance test of water jet propulsion under the specified test conditions. This document specifies the precision grade of Class A for hydraulic model tests of water jet propulsion and Class B for acceptance tests of small and middle-sized or intermediate test models. In addition, this document specifies the test conditions of Class A and Class B, and recommendations and requirements for test equipment to ensure that the test can be carried out under the conditions of corresponding accuracy. This document does not include miscellaneous parts of waterjet unit, such as steering and reversing gear, hydraulic system and control system.

  • Standard
    18 pages
    English language
    sale 15% off
ISO
ISO 23453:2022(Main)
Ships and marine technology — Guidelines for the design and manufacture of the hub cap with fins for a fixed-pitch marine propeller

This document provides general guidelines for design and manufacture of a hub vortex energy-saving device for a fixed-pitch marine propeller. This document can also apply to the design and manufacture of hub vortex energy-saving device for other types of marine propellers. According to the specific geometrical shape of the propeller and other specifications, it is suggested that hub cap with fins is used in merchant ships.

  • Standard
    7 pages
    English language
    sale 15% off
ISO
ISO 22098:2020(Main)
Ships and marine technology — Full-scale test method for propeller cavitation observation and hull pressure measurement

This document specifies a full-scale test method for propeller cavitation observation and hull pressure measurement. The objective of the test is to investigate the propeller cavitation behaviour and its effects on the hull vibration problems. The test method comprises the specification of the test instrumentation and implementation, construction requirements to ensure structural safety, test and measurement procedures, and reporting documentation. This document is applicable to ships in the following stages: — before or during sea-trial, prior to delivery stage (vessels under constructions), and — after delivery stage.

  • Standard
    12 pages
    English language
    sale 15% off
ISO
ISO 20233-2:2019(Main)
Ships and marine technology — Model test method for propeller cavitation noise evaluation in ship design — Part 2: Noise source localization

This document specifies a model test method for propeller cavitation noise evaluation in ship design, focusing mainly on the noise source localization. The procedure comprises the model test set-up, noise measurements, data processing and source localization. The target noise source being propeller cavitation, this document describes the test set-up and conditions to reproduce the cavitation patterns of the ship, which is the same as in ISO 20233‑1. The noise measurements are performed using a hydrophone array for the source localizations. Therefore, the instrumentation of the hydrophone array is also addressed, as well as a suitable array signal processing of the measured data. Finally, a method to visualize and to interpret the results is presented.

  • Standard
    10 pages
    English language
    sale 15% off
ISO
ISO 20083-3:2019(Main)
Ships and marine technology — Determination of the shaft power of ship propulsion systems by measuring the shaft distorsion — Part 3: Elastic vibration method

This document specifies a procedure to determine the shaft power of engine ships, by measuring the shaft distortion using an elastic vibration type device. It gives the principles of the measurement, the components of the device and the calculation method. It also describes the factors for determining the measuring accuracy and specifies the on-board documentation for the device.

  • Standard
    8 pages
    English language
    sale 15% off