ISO/IEC/IEEE 8802-3-2:2021

FINAL
INTERNATIONAL ISO/IEC/
DRAFT
STANDARD IEEE/FDIS
8802-3-2
ISO/IEC JTC 1/SC 6
Telecommunications and exchange
Secretariat: KATS
between information technology
Voting begins on:
2021-05-31 systems — Requirements for local and
metropolitan area networks —
Voting terminates on:
2021-10-18
Part 3-2:
Standard for Ethernet YANG data
model definitions
RECIPIENTS OF THIS DRAFT ARE INVITED TO
SUBMIT, WITH THEIR COMMENTS, NOTIFICATION
OF ANY RELEVANT PATENT RIGHTS OF WHICH
THEY ARE AWARE AND TO PROVIDE SUPPOR TING
DOCUMENTATION.
IN ADDITION TO THEIR EVALUATION AS
Reference number
BEING ACCEPTABLE FOR INDUSTRIAL, TECHNO-
ISO/IEC/IEEE FDIS 8802-3-2:2021(E)
LOGICAL, COMMERCIAL AND USER PURPOSES,
DRAFT INTERNATIONAL STANDARDS MAY ON
OCCASION HAVE TO BE CONSIDERED IN THE
LIGHT OF THEIR POTENTIAL TO BECOME STAN-
DARDS TO WHICH REFERENCE MAY BE MADE IN
©
NATIONAL REGULATIONS. IEEE 2019

---------------------- Page: 1 ----------------------
ISO/IEC/IEEE FDIS 8802-3-2:2021(E)

COPYRIGHT PROTECTED DOCUMENT
© IEEE 2019
All rights reserved. Unless otherwise specified, or required in the context of its implementation, no part of this publication may
be reproduced or utilized otherwise in any form or by any means, electronic or mechanical, including photocopying, or posting
on the internet or an intranet, without prior written permission. Permission can be requested from IEEE at the address below.
Institute of Electrical and Electronics Engineers, Inc
3 Park Avenue, New York
NY 10016-5997, USA
Email: stds.ipr@ieee.org
Website: www.ieee.org
Published in Switzerland
ii © IEEE 2019 – All rights reserved

---------------------- Page: 2 ----------------------
ISO/IEC/IEEE FDIS 8802-3-2:2021(E)
Foreword
ISO (the International Organization for Standardization) and IEC (the International Electrotechnical
Commission) form the specialized system for worldwide standardization. National bodies that are
members of ISO or IEC participate in the development of International Standards through technical
committees established by the respective organization to deal with particular fields of technical activity.
ISO and IEC technical committees collaborate in fields of mutual interest. Other international
organizations, governmental and non-governmental, in liaison with ISO and IEC, also take part in the
work.
The procedures used to develop this document and those intended for its further maintenance are
described in the ISO/IEC Directives, Part 1. In particular, the different approval criteria needed for the
different types of ISO/IEC documents should be noted (see www.iso.org/directives or
www.iec.ch/members_experts/refdocs).
IEEE Standards documents are developed within the IEEE Societies and the Standards Coordinating
Committees of the IEEE Standards Association (IEEE-SA) Standards Board. The IEEE develops its
standards through a consensus development process, approved by the American National Standards
Institute, which brings together volunteers representing varied viewpoints and interests to achieve the
final product. Volunteers are not necessarily members of the Institute and serve without compensation.
While the IEEE administers the process and establishes rules to promote fairness in the consensus
development process, the IEEE does not independently evaluate, test, or verify the accuracy of any of the
information contained in its standards.
Attention is drawn to the possibility that some of the elements of this document may be the subject of
patent rights. ISO and IEC shall not be held responsible for identifying any or all such patent rights. Details
of any patent rights identified during the development of the document will be in the Introduction and/or
on the ISO list of patent declarations received (see www.iso.org/patents) or the IEC list of patent
declarations received (see patents.iec.ch).
Any trade name used in this document is information given for the convenience of users and does not
constitute an endorsement.
For an explanation of the voluntary nature of standards, the meaning of ISO specific terms and
expressions related to conformity assessment, as well as information about ISO's adherence to the World
Trade Organization (WTO) principles in the Technical Barriers to Trade (TBT),
see www.iso.org/iso/foreword.html. In the IEC, see www.iec.ch/understanding-standards.
ISO/IEC/IEEE 8802-3-2 was prepared by the LAN/MAN of the IEEE Computer Society (as IEEE Std
802.3.2-2019) and drafted in accordance with its editorial rules. It was adopted, under the “fast-track
procedure” defined in the Partner Standards Development Organization cooperation agreement between
ISO and IEEE, by Joint Technical Committee ISO/IEC JTC 1, Information technology, Subcommittee SC 6,
Telecommunications and information exchange between systems.
A list of all parts in the ISO/IEC/IEEE 8802 series can be found on the ISO and IEC websites.
Any feedback or questions on this document should be directed to the user’s national standards body. A
complete listing of these bodies can be found at www.iso.org/members.html and www.iec.ch/national-
committees.
© IEEE 2019 – All rights reserved iii

---------------------- Page: 3 ----------------------
ISO/IEC/IEEE FDIS 8802-3-2:2021(E)
Abstract: YANG models for IEEE Std 802.3 are defined in this standard. This standard also
publishes these models in a machine-readable format.
Keywords: 802.3, 802.3.2, Ethernet, YANG
The Institute of Electrical and Electronics Engineers, Inc.
3 Park Avenue, New York, NY 10016-5997, USA
Copyright © 2019 by the Institute of Electrical and Electronics Engineers, Inc.
All rights reserved. Published 21 June 2019. Printed in the United States of America.
IEEE and 802 are registered trademarks in the U.S. Patent & Trademark Office, owned by the Institute of Electrical and
Electronics Engineers, Incorporated.
PDF: ISBN 978-1-5044-5671-5 STD23620
Print: ISBN 978-1-5044-5672-2 STDPD23620
IEEE prohibits discrimination, harassment and bullying. For more information, visit http://www.ieee.org/web/aboutus/whatis/policies/p9-26.html.
No part of this publication may be reproduced in any form, in an electronic retrieval system or otherwise, without the prior written permission
of the publisher.

---------------------- Page: 4 ----------------------
ISO/IEC/IEEE FDIS 8802-3-2:2021(E)
Important Notices and Disclaimers Concerning IEEE Standards Documents
IEEE documents are made available for use subject to important notices and legal disclaimers. These notices
and disclaimers, or a reference to this page, appear in all standards and may be found under the heading
“Important Notice” or “Important Notices and Disclaimers Concerning IEEE Standards Documents.”
Notice and Disclaimer of Liability Concerning the Use of IEEE Standards
Documents
IEEE Standards documents (standards, recommended practices, and guides), both full-use and trial-use, are
developed within IEEE Societies and the Standards Coordinating Committees of the IEEE Standards
Association (“IEEE-SA”) Standards Board. IEEE (“the Institute”) develops its standards through a
consensus development process, approved by the American National Standards Institute (“ANSI”), which
brings together volunteers representing varied viewpoints and interests to achieve the final product.
Volunteers are not necessarily members of the Institute and participate without compensation from IEEE.
While IEEE administers the process and establishes rules to promote fairness in the consensus development
process, IEEE does not independently evaluate, test, or verify the accuracy of any of the information or the
soundness of any judgments contained in its standards.
IEEE does not warrant or represent the accuracy or content of the material contained in its standards, and
expressly disclaims all warranties (express, implied and statutory) not included in this or any other
document relating to the standard, including, but not limited to, the warranties of: merchantability; fitness
for a particular purpose; non-infringement; and quality, accuracy, effectiveness, currency, or completeness
of material. In addition, IEEE disclaims any and all conditions relating to: results; and workmanlike effort.
IEEE standards documents are supplied “AS IS” and “WITH ALL FAULTS.”
Use of an IEEE standard is wholly voluntary. The existence of an IEEE standard does not imply that there
are no other ways to produce, test, measure, purchase, market, or provide other goods and services related t o
the scope of the IEEE standard. Furthermore, the viewpoint expressed at the time a standard is approved and
issued is subject to change brought about through developments in the state of the art and comments
received from users of the standard.
In publishing and making its standards available, IEEE is not suggesting or rendering professional or othe r
services for, or on behalf of, any person or entity nor is IEEE undertaking to perform any duty owed by any
other person or entity to another. Any person utilizing any IEEE Standards document, should rely upon his
or her own independent judgment in the exercise of reasonable care in any given circumstances or, as
appropriate, seek the advice of a competent professional in determining the appropriateness of a given IEEE
standard.
IN NO EVENT SHALL IEEE BE LIABLE FOR ANY DIRECT, INDIRECT, INCIDENTAL, SPECIAL,
EXEMPLARY, OR CONSEQUENTIAL DAMAGES (INCLUDING, BUT NOT LIMITED TO:
PROCUREMENT OF SUBSTITUTE GOODS OR SERVICES; LOSS OF USE, DATA, OR PROFITS; OR
BUSINESS INTERRUPTION) HOWEVER CAUSED AND ON ANY THEORY OF LIABILITY,
WHETHER IN CONTRACT, STRICT LIABILITY, OR TORT (INCLUDING NEGLIGENCE OR
OTHERWISE) ARISING IN ANY WAY OUT OF THE PUBLICATION, USE OF, OR RELIANCE
UPON ANY STANDARD, EVEN IF ADVISED OF THE POSSIBILITY OF SUCH DAMAGE AND
REGARDLESS OF WHETHER SUCH DAMAGE WAS FORESEEABLE.
Translations
The IEEE consensus development process involves the review of documents in English only. In the even t
that an IEEE standard is translated, only the English version published by IEEE should be considered the
approved IEEE standard.
3
Copyright © 2019 IEEE. All rights reserved.

---------------------- Page: 5 ----------------------
ISO/IEC/IEEE FDIS 8802-3-2:2021(E)
Official statements
A statement, written or oral, that is not processed in accordance with the IEEE-SA Standards Board
Operations Manual shall not be considered or inferred to be the official position of IEEE or any of its
committees and shall not be considered to be, or be relied upon as, a formal position of IEEE. At lectures,
symposia, seminars, or educational courses, an individual presenting information on IEEE standards shal l
make it clear that his or her views should be considered the personal views of that individual rather than the
formal position of IEEE.
Comments on standards
Comments for revision of IEEE Standards documents are welcome from any interested party, regardless of
membership affiliation with IEEE. However, IEEE does not provide consulting information or advic e
pertaining to IEEE Standards documents. Suggestions for changes in documents should be in the form of a
proposed change of text, together with appropriate supporting comments. Since IEEE standards represent a
consensus of concerned interests, it is important that any responses to comments and questions also receive
the concurrence of a balance of interests. For this reason, IEEE and the members of its societies and
Standards Coordinating Committees are not able to provide an instant response to comments or questions
except in those cases where the matter has previously been addressed. For the same reason, IEEE does not
respond to interpretation requests. Any person who would like to participate in revisions to an IEEE
standard is welcome to join the relevant IEEE working group.
Comments on standards should be submitted to the following address:
Secretary, IEEE-SA Standards Board
445 Hoes Lane
Piscataway, NJ 08854 USA
Laws and regulations
Users of IEEE Standards documents should consult all applicable laws and regulations. Compliance with the
provisions of any IEEE Standards document does not imply compliance to any applicable regulatory
requirements. Implementers of the standard are responsible for observing or referring to the applicable
regulatory requirements. IEEE does not, by the publication of its standards, intend to urge action that is not
in compliance with applicable laws, and these documents may not be construed as doing so.
Copyrights
IEEE draft and approved standards are copyrighted by IEEE under U.S. and international copyright laws.
They are made available by IEEE and are adopted for a wide variety of both public and private uses. These
include both use, by reference, in laws and regulations, and use in private self-regulation, standardization,
and the promotion of engineering practices and methods. By making these documents available for use and
adoption by public authorities and private users, IEEE does not waive any rights in copyright to the
documents.
Photocopies
Subject to payment of the appropriate fee, IEEE will grant users a limited, non-exclusive license t o
photocopy portions of any individual standard for company or organizational internal use or individual, non-
commercial use only. To arrange for payment of licensing fees, please contact Copyright Clearance Center,
Customer Service, 222 Rosewood Drive, Danvers, MA 01923 USA; +1 978 750 8400. Permission to
4
Copyright © 2019 IEEE. All rights reserved.

---------------------- Page: 6 ----------------------
ISO/IEC/IEEE FDIS 8802-3-2:2021(E)
photocopy portions of any individual standard for educational classroom use can also be obtained throug h
the Copyright Clearance Center.
Updating of IEEE Standards documents
Users of IEEE Standards documents should be aware that these documents may be superseded at any tim e
by the issuance of new editions or may be amended from time to time through the issuance of amendments,
corrigenda, or errata. An official IEEE document at any point in time consists of the current edition of the
document together with any amendments, corrigenda, or errata then in effect.
Every IEEE standard is subjected to review at least every ten years. When a document is more than ten years
old and has not undergone a revision process, it is reasonable to conclude that its contents, although still o f
some value, do not wholly reflect the present state of the art. Users are cautioned to check to determine that
they have the latest edition of any IEEE standard.
In order to determine whether a given document is the current edition and whether it has been amended
through the issuance of amendments, corrigenda, or errata, visit the IEEE-SA Website a t
http://ieeexplore.ieee.org/xpl/standards.jsp or contact IEEE at the address listed previously. For mor e
information about the IEEE SA or IEEE's standards development process, visit the IEEE-SA Website a t
http://standards.ieee.org.
Errata
Errata, if any, for all IEEE standards can be accessed on the IEEE-SA Website at the following URL:
http://standards.ieee.org/findstds/errata/index.html. Users are encouraged to check this URL for errata
periodically.
Patents
Attention is called to the possibility that implementation of this standard may require use of subject matter
covered by patent rights. By publication of this standard, no position is taken by the IEEE with respect to the
existence or validity of any patent rights in connection therewith. If a patent holder or patent applicant has
filed a statement of assurance via an Accepted Letter of Assurance, then the statement is listed on the IEEE-
SA Website at http://standards.ieee.org/about/sasb/patcom/patents.html. Letters of Assurance may indicate
whether the Submitter is willing or unwilling to grant licenses under patent rights without compensation o r
under reasonable rates, with reasonable terms and conditions that are demonstrably free of any unfair
discrimination to applicants desiring to obtain such licenses.
Essential Patent Claims may exist for which a Letter of Assurance has not been received. The IEEE is not
responsible for identifying Essential Patent Claims for which a license may be required, for conducting
inquiries into the legal validity or scope of Patents Claims, or determining whether any licensing terms o r
conditions provided in connection with submission of a Letter of Assurance, if any, or in any licensing
agreements are reasonable or non-discriminatory. Users of this standard are expressly advised that
determination of the validity of any patent rights, and the risk of infringement of such rights, is entirely thei r
own responsibility. Further information may be obtained from the IEEE Standards Association.
5
Copyright © 2019 IEEE. All rights reserved.

---------------------- Page: 7 ----------------------
ISO/IEC/IEEE FDIS 8802-3-2:2021(E)
Participants
The following individuals were officers and members of the IEEE 802.3 working group at the beginning of
the IEEE P802.3.2 (IEEE 802.3cf) working group ballot. Individuals may have not voted, voted for
approval, disapproval or abstained on this standard.
David J. Law, IEEE 802.3 Working Group Chair
Adam Healey, IEEE 802.3 Working Group Vice-Chair
Pete Anslow, IEEE 802.3 Working Group Secretary
Steven B. Carlson, IEEE 802.3 Working Group Executive Secretary
Valerie Maguire, IEEE 802.3 Working Group Treasurer
Yan Zhuang, IEEE P802.3.2 (IEEE 802.3cf)YANG Data Model Definitions
Task Force Chair
Marek Hajduczenia, IEEE P802.3.2 (IEEE 802.3cf) YANG Data Model Definitions
Task Force Editor-in-Chief
Estes David
David Abramson Kimber Mark
John Ewen
Dale Amason Klaus Andrew
Ramin Farjad Michael Klempa
Ali Angha
Eric Baden Shahar Feldman Curtis Knittle
Amrik Bains Alan Flatman Elizabeth Kochuparambil
Paul Kolesar
Thananya Baldwin Brian Franchuk
Hans Lackner
Denis Beaudoin Matthias Fritsche
Jeffrey Lapak
Piergiorgio Beruto Richard Frosch
Mark Laubach
Mark Bohm Mike Gardner
Greg Le Cheminant
Brad Booth Ali Ghiasi
Han Hyub Lee
Martin Bouda Joel Goergen
Hanan Leizerovich
David Brandt Steven Gorshe
David Lewis
Ralf-Peter Braun Jens Gottron
Jon Lewis
Theodore Brillhart Steffen Graber
Mike Peng Li
Paul Brooks Olaf Grau
Jane Lim
Matthew Brown Robert M. Grow
Alex Lin
Phillip Brownlee Yong Guo
Robert Lingle
Chris Bullock Mark Gustlin
Dekun Liu
Jairo Bustos Heredia Tomohiro Hashimoto
Hai-Feng Liu
Adrian Butter Akinori Hayakawa
Zhenyu Liu
Clark Carty Rajmohan Hegde
Miklos Lukacs
Craig Chabot David Hess
Kent Lusted
Mandeep Chadha Yasuo Hidaka
Zahy Madgar
David Chalupsky David Hoglund
Jeffery Maki
Frank Chang Rita Horner
David Malicoat
Xin Chang Bernd Horrmeyer
Arthur Marris
Chan Chen Xi Huang
Takeo Masuda
Weiying Cheng Yasuhiro Hyakutake
Kirsten Matheus
Golam Choudhury Jonathan Ingham
Erdem Matoglu
Keng Hua Chuang Kazuhiko Ishibe
Mick McCarthy
Keith Conroy Hideki Isono
Brett Mcclellan
John D’Ambrosia Tom Issenhuth
Thomas Mcdermott
Yair Darshan Kenneth Jackson
Larry McMillan
Piers Dawe Andrew Jimenez
Greg McSorley
Fred Dawson John Johnson
Marcel Medina
Eric DiBiaso Chad Jones
Richard Mei
Chris Diminico Peter Jones
Richard Mellitz
Mike Dudek
Upen Kareti
Phil Miguelez
Frank Effenberger
Yasuaki Kawatsu
Harald Mueller
Eitel Cornelia Yong Kim
Ron Muir
6
Copyright © 2019 IEEE. All rights reserved.

---------------------- Page: 8 ----------------------
ISO/IEC/IEEE FDIS 8802-3-2:2021(E)
Henry Muyshondt Laura Schweitz Alexander Umnov
Edward Nakamoto Masood Shariff Sterling A. Vaden
Gary Nicholl Ramin Shirani Paul Vanderlaan
Kevin Noll Mizuki Shirao
Dylan Walker
Ronald Nordin Kapil Shrikhande Edward Walter
Mark Nowell Jeff Slavick Haifei Wang
David Ofelt Daniel Smith Roy Wang
Tom Palkert Scott Sommers Tongtong Wang
Sujan Pandey Bryan Sparrowhawk Xinyuan Wang
Earl Parsons Edward Sprague Christoph Wechsler
Harsh Patel Atul Srivastava Brian Welch
Arkadiy Peker Peter Stassar Matthias Wendt
Wanquan Peng Heath Stewart Oded Wertheim
Gerald Pepper David Stover Natalie Wienckowski
Michael Peters
Junqing Sun Ludwig Winkel
Phong Pham Steve Swanson Peter Wu
Jean Picard Andre Szczepanek Markus Wucher
David Piehler Bharat Tailor Dayin Xu
Rick Pimpinella Tomoo Takahara Yu Xu
William Powell Kohichi Tamura Adrian Young
Rick Rabinovich Lennart Yseboodt
Ronald Tellas
Adee Ran Geoffrey O. Thompson Andrew Zambell
Alon Regev Pirooz Tooyserkani Conrad Zerna
Duane Remein Nathan Tracy Huanlin Zhang
Michael Ressl Matthew Traverso Qiwen Zhong
Salvatore Rotolo
David Tremblay Martin Zielinski
Sam Sambasivan George Zimmerman
Stephen Trowbridge
Edward Sayre Ed Ulrichs Helge Zinner
Fred Schindler Daisuke Umeda Pavel Zivny
The following members of the individual balloting committee voted on this standard. Balloters may have
voted for approval, disapproval, or abstention.
Atsushi Ito Maximilian Riegel
Andrea Agnes
Richard Alfvin Raj Jain
Robert Robinson
Niranth Amogh SangKwon Jeong
Benjamin Rolfe
Peter Anslow Stuart Kerry
Daniel Smith
Butch Anton Yongbum Kim
Thomas Starai
Ralf-Peter Braun Patrick Kinney
Peter Stassar
Nancy Bravin Mark Laubach
Walter Struppler
Theodore Brillhart David J. Law
Ganesh Subramanian
Matthew Brown Hyeong Ho Lee
Mitsutoshi Sugawara
Demetrio Bucaneg Jon Lewis
Kohichi Tamura
Jairo Bustos Heredia Elvis Maculuba
David Tremblay
Valerie Maguire
William Byrd
Stephen Trowbridge
Jeffery Maki
Steven Carlson
Keith Chow Vinayagam Mariappan Mark-Rene Uchida
Rodney Cummings Roger Marks
Alexander Umnov
Andrew Fieldsend Arthur Marris
Dmitri Varsanofiev
Avraham Freedman Michael Maytum
George Vlantis
Matthias Fritsche Brett Mcclellan
Khurram Waheed
Yukihiro Fujimoto Thomas Mcdermott
Karl Weber
Eric W. Gray Richard Mellitz
Hung-Yu Wei
Randall Groves Nick S.A. Nikjoo
Scott Willy
Robert M. Grow Satoshi Obara
Adrian Young
Marek Hajduczenia Bansi Patel
James Young
Adam Healey Rick Pimpinella
Oren Yuen
William Powell
Marco Hernandez
Zhen Zhou
R. K. Rannow
Werner Hoelzl
Noriyuki Ikeuchi Alon Regev Yan Zhuang
Sergiu Iordanescu Duane Remein Pavel Zivny
7
Copyright © 2019 IEEE. All rights reserved.

---------------------- Page: 9 ----------------------
ISO/IEC/IEEE FDIS 8802-3-2:2021(E)
When the IEEE-SA Standards Board approved this standard on 21 March 2019, it had the following
membership:
Gary Hoffman, Chair
Ted Burse, Vice Chair
Jean-Philippe Faure, Past Chair
Konstantinos Karachalios, Secretary
Masayuki Ariyoshi John D. Kulick Dorothy Stanley
Stephen D. Dukes David J. Law
Sha Wei
J. Travis Griffith Joseph Levy
Phil Wennblom
Guido Hiertz Howard Li
Philip Winston
Christel Hunter Xiaohui Liu
Howard Wolfman
Thomas Koshy Kevin Lu
Feng Wu
Daleep Mohla
Joseph L. Koepfinger*
Jingyi Zhou
Andrew Myles
Thomas Koshy
Annette D. Reilly
*Member Emeritus
8
Copyright © 2019 IEEE. All rights reserved.

---------------------- Page: 10 ----------------------
ISO/IEC/IEEE FDIS 8802-3-2:2021(E)
Introduction
This introduction is not part of IEEE Std 802.3.2-2019, IEEE Standard for Ethernet YANG Data Model Definitions.
The YANG modules included in this standard provide YANG versions of attributes defined i n
TM
IEEE Std 802.3 -2018, Clause 30, as well as derivative attributes defined in other management informa-
tion bases (e.g., SNMP attributes included in IEEE Std 802.3.1, YANG versions of IETF Etherlike MIB
attributes, etc.). The YANG modules defined in this standard accommodate IEEE Std 802.3-2018, excluding
any currently published or future amendments. As IEEE Std 802.3 continues to evolve, new revisions of this
standard may be published in the future to address new technologies and features.
9
Copyright © 2019 IEEE. All rights reserved.

---------------------- Page: 11 ----------------------
ISO/IEC/IEEE FDIS 8802-3-2:2021(E)
Contents
1. Overview. 12
1.1 Scope. 12
1.2 Purpose. 12
1.3 Machine-readable YANG modules . 12
1.4 Summary of YANG-based management framework. 12
1.5 Security considerations . 13
1.6 YANG module syntax validation . 13
2. Normative references. 14
3. Definitions . 16
4. Abbreviations. 17
5. Ethernet YANG Module. 18
5.1 YANG module structure. 18
5.2 Mapping of IEEE Std 802.3, Clause 30 managed objects . 18
5.3 YANG module definition . 23
5.3.1 Tree hierarchy . 23
5.3.2 YANG module. 26
5.3.2.1 Ethernet interface module. 26
5.3.2.2 Ethernet interface module (half-duplex). 43
6. YANG module for Ethernet data terminal equipment (DTE) power via medium dependent
interface (MDI) and Power over Data Lines (PoDL) . 50
6.1 Introduction. 50
6.2 YANG module structure. 50
6.3 Security considerations for Ethernet data terminal equipment (DTE) power via medium
dependent interface (MDI) and Power over Data Line Module . 50
6.4 Mapping of IEEE Std 802.3, Clause 30 managed objects . 50
6.5 YANG module definition . 53
6.5.1 Tree hierarchy . 53
6.5.2 YANG module. 54
7. YANG module for Ethernet Passive Optical Network (EPON). 65
7.1 Introduction. 65
7.2 YANG module structure. 65
7.2.1 Introduction. 65
7.2.2 Principles of operation . 66
7.2.3 Physical media . 67
7.2.4 PMD specifications. 67
7.2.5 Principles of the MPCP. 67
7.2.6 Forward error correction (FEC). 69
7.2.7 Management architecture. 70
7.3 Mapping of IEEE Std 802.3, Clause 30 managed objects . 71
7.4 YANG module definition . 77
7.4.1 Tree hierarchy . 77
10
Copyright © 2019 IEEE. All rights reserved.

---------------------- Page: 12 ----------------------
ISO/IEC/IEEE FDIS 8802-3-2:2021(E)
7.4.2 YANG module. 80
8. YANG module for Ethernet Link OAM (ELO) . 123
8.1 Introduction.
...