ISO 545:1975
(Main)Filler rods, other than drawn or extruded, for welding - Lengths and tolerance
Filler rods, other than drawn or extruded, for welding - Lengths and tolerance
Métaux d'apport non tréfilés — Longueurs et tolérance
General Information
Relations
Frequently Asked Questions
ISO 545:1975 is a standard published by the International Organization for Standardization (ISO). Its full title is "Filler rods, other than drawn or extruded, for welding - Lengths and tolerance". This standard covers: Filler rods, other than drawn or extruded, for welding - Lengths and tolerance
Filler rods, other than drawn or extruded, for welding - Lengths and tolerance
ISO 545:1975 is classified under the following ICS (International Classification for Standards) categories: 25.160.20 - Welding consumables. The ICS classification helps identify the subject area and facilitates finding related standards.
ISO 545:1975 has the following relationships with other standards: It is inter standard links to ISO 544:1989. Understanding these relationships helps ensure you are using the most current and applicable version of the standard.
You can purchase ISO 545:1975 directly from iTeh Standards. The document is available in PDF format and is delivered instantly after payment. Add the standard to your cart and complete the secure checkout process. iTeh Standards is an authorized distributor of ISO standards.
Standards Content (Sample)
INTERNATIONAL STANDARD @ 545
'a=!@
~
IYTERNATIONAL ORGANIZATIOh FOR STANDARDIZATION .UFA2VHhPO,lH4R OPrlHM3hUMR Il0 CTAHLIAPTM3AUMM *ORGANISATION INTERNATIONALE DE NORMALISATION
L
Filler rods, other than drawn or extruded, for welding -
Lengths and tolerance
Métaux d'apport non tréfilés - Longueurs et tolérance
First edition - 1975-06-01
Y
UDC 621.791.042-1 81 Ref. No. IS0 545-1975 (E)
Descriptors : welding, filler metal, welding rods, dimensions. length, dimensional tolerances
Price based on 1 page
__ -
-_--- -
_-
FOREWORD
IS0 (the International Organization for Standardization) is a worldwide federation
of national standards institutes (IS0 Member Bodies). The work of developing
International Standards is carried out through IS0 Technical Committees. Every
Member Body interested in a subject for which a Technical Committee has been set
up has the right to be represented on that Committee. International organizations,
governmental and non-governmental, in liaison with ISO, also take part in the work.
Draft International Standards adopted by the Technical Committees are circulated
to the Member Bodies for approval before their acceptance as International
Standards by the IS0 Council.
Prior to 1972, the results of the work of the Technical Committees were published
as IS0 Recommendations; these documents are now in the process of being
transfor
...
NORME INTERNATIONALE @ 545
‘*E@
INTERNATIONAL ORGANIZATION FOR STANDARDIZATION .MEXAYHAPOLIHAR OPrAHM3AUMR il0 CTAHILAPTM3AUMM .ORGANISATION INTERNATIONALE DE NORMALISATION
Métaux d‘apport non tréfilés - Longueurs et tolérance
Filler rods, other than drawn or extruded, for welding - Lengths and tolerance
Première édition - 1975-06-01
CDU 621.791.042-181 Réf. no : IS0 545-1975 (F)
Descripteurs : soudage, métal d‘apport, baguette de soudage, dimension, longueur, tolérance de dimension.
Prix basé sur 1 page
AVANT-PROPOS
L'ISO (Organisation Internationale de Normalisation) est une fédération mondiale
d'organismes nationaux de normalisation (Comités Membres ISO). L'élaboration de
Normes Internationales est confiée aux Comités Techniques ISO. Chaque Comité
Membre intéressé par une étude a le droit de faire partie du Comité Technique
correspondant. Les organisations internationales, gouvernementales et non
gouvernementales, en liaison avec I'ISO, participent également aux travaux.
Les Projets de Normes Internationales adoptés par les Comités Techniques sont
soumis aux Comités Membres pour approbation, avant leur acceptation comme
Normes Internationales par le Conseil de I'ISO.
Avant 1972, les résultats des travaux des Comités Techniques étaient publiés
comme Recommandations ISO; maintenant, ces documents sont en cours de
transformation en Normes Internationales.
...
Questions, Comments and Discussion
Ask us and Technical Secretary will try to provide an answer. You can facilitate discussion about the standard in here.
Loading comments...