ISO 8036:2015

INTERNATIONAL ISO
STANDARD 8036
Redline version
compares Second edition to
First edition
Microscopes — Immersion liquids for
light microscopy
Microscopes — Liquides d’immersion pour microscopie optique
Reference number
ISO 8036:redline:2015(E)
©
ISO 2015

---------------------- Page: 1 ----------------------
ISO 8036:redline:2015(E)

IMPORTANT — PLEASE NOTE
This is a mark-up copy and uses the following colour coding:
Text example 1 — indicates added text (in green)
— indicates removed text (in red)
Text example 2
— indicates added graphic figure
— indicates removed graphic figure
1.x . — Heading numbers containg modifications are highlighted in yellow in
the Table of Contents
All changes in this document have yet to reach concensus by vote and as such should only
be used internally for review purposes.
DISCLAIMER
This Redline version provides you with a quick and easy way to compare the main changes
between this edition of the standard and its previous edition. It doesn’t capture all single
changes such as punctuation but highlights the modifications providing customers with
the most valuable information. Therefore it is important to note that this Redline version is
not the official ISO standard and that the users must consult with the clean version of the
standard, which is the official standard, for implementation purposes.
COPYRIGHT PROTECTED DOCUMENT
© ISO 2015, Published in Switzerland
All rights reserved. Unless otherwise specified, no part of this publication may be reproduced or utilized otherwise in any form
or by any means, electronic or mechanical, including photocopying, or posting on the internet or an intranet, without prior
written permission. Permission can be requested from either ISO at the address below or ISO’s member body in the country of
the requester.
ISO copyright office
Ch. de Blandonnet 8 • CP 401
CH-1214 Vernier, Geneva, Switzerland
Tel. +41 22 749 01 11
Fax +41 22 749 09 47
copyright@iso.org
www.iso.org
ii © ISO 2015 – All rights reserved

---------------------- Page: 2 ----------------------
ISO 8036:redline:2015(E)

Contents Page
Foreword .iv
1 Scope . 1
2 Normative references . 1
3 Classification . 1
4 Characteristics of immersion liquids . 1
4.1 Optical properties . 1
4.2 Transmittance . 2
4.3 Autofluorescence. 2
4.4 Viscosity . 3
4.5 Density . 3
5 Minimum requirements . 3
6 Ingredients . 3
7 Designation of immersion liquids . 3
8 Labelling of containers. 3
9 Technical data sheet. 5
© ISO 2015 – All rights reserved iii

---------------------- Page: 3 ----------------------
ISO 8036:redline:2015(E)

Foreword
ISO (the International Organization for Standardization) is a worldwide federation of national standards
bodies (ISO member bodies). The work of preparing International Standards is normally carried out
through ISO technical committees. Each member body interested in a subject for which a technical
committee has been established has the right to be represented on that committee. International
organizations, governmental and non-governmental, in liaison with ISO, also take part in the work.
ISO collaborates closely with the International Electrotechnical Commission (IEC) on all matters of
electrotechnical standardization.
International Standards areThe procedures used to develop this document and those intended for its
further maintenance are described in the ISO/IEC Directives, Part 1. In particular the different approval
criteria needed for the different types of ISO documents should be noted. This document was drafted
in accordance with the rules given ineditorial rules of the ISO/IEC Directives, Part 2 (see www.iso.
org/directives).
The main task of technical committees is to prepare International Standards. Draft International
Standards adopted by the technical committees are circulated to the member bodies for voting.
Publication as an International Standard requires approval by at least 75 % of the member bodies
casting a vote.
Attention is drawn to the possibility that some of the elements of this document may be the subject of
patent rights. ISO shall not be held responsible for identifying any or all such patent rights. Details of any
patent rights identified during the development of the document will be in the Introduction and/or on
the ISO list of patent declarations received (see www.iso.org/patents).
Any trade name used in this document is information given for the convenience of users and does not
constitute an endorsement.
For an explanation on the meaning of ISO specific terms and expressions related to conformity
assessment, as well as information about ISO’s adherence to the WTO principles in the Technical Barriers
to Trade (TBT), see the following URL: Foreword — Supplementary information.
ISO 8036 was prepared by Technical CommitteeThe committee responsible for this document is
ISO/TC 172, Optics and photonics, Subcommittee SC 5, Microscopes and endoscopes.
ItThis second edition cancels and replaces the first edition (ISO 8036-1:1998:2006, which has been
technically revised), where in Clause 6, the outdated reference to the EU Directive 91/155/EEC and its
Amendments 93/112/EC and 01/58/EC were removed.
The scope has been extended to include not only immersion oils for general use in light microscopy, but
also immersion liquids for use in fluorescence microscopy.
iv © ISO 2015 – All rights reserved

---------------------- Page: 4 ----------------------
INTERNATIONAL STANDARD ISO 8036:redline:2015(E)
Microscopes — Immersion liquids for light microscopy
1 Scope
This International Standard describes the characteristics of immersion liquids used in microscopy. It
classifies immersion liquids according to their field of application and specifies requirements and test
methods for each type.
This International Standard further specifies a system of designation for immersion liquids, the
information to be included on container labels, and the information to be supplied in technical data
sheets.
2 Normative references
The following referenced documentsdocuments, in whole or in part, are normatively referenced in this
document and are indispensable for the application of this documentits application. For dated references,
only the edition cited applies. For undated references, the latest edition of the referenced document
(including any amendments) applies.
ISO 2592, Determination of flash and fire points — Cleveland open cup method
ISO 8255-1, Optics and optical instruments —  Microscopes — Cover glasses — Part 1: Dimensional
tolerances, thickness and optical properties
ISO 8255-2, Optics and optical instruments —  Microscopes — Cover glasses — Part 2: Quality of materials,
standards of finish and mode of packaging
3 Classification
Depending on their field of application, immersion liquids are classified as follows:
— type N
...