iTeh Standards logo
EURUSD
Your shopping cart is empty.
ISO

ISO 4393:1978

(Main)

Fluid power systems and components - Cylinders - Basic series of piston strokes

Fluid power systems and components - Cylinders - Basic series of piston strokes

It specifies the preferred series of piston strokes for application to single-acting and double-acting, hydraulic and pneumatic fluid power cylinders. The figure shows the identification of piston strokes. It tabulates piston strokes from 25 mm up to and including 500 mm. If an extension of the series shown is required, use the rounded-off R 10 series of values as shown in ISO 497.

Transmissions hydrauliques et pneumatiques — Vérins — Série de base de courses de piston

La présente Norme internationale fixe la série préférentielle des courses de piston à adopter pour les vérins pour transmissions hydrauliques et pneumatiques, à simple ou à double effet.

Fluidna tehnika - Valji - Osnovna vrsta batnih gibov

General Information

Status
Withdrawn
Publication Date
31-Aug-1978
Withdrawal Date
31-Aug-1978
ICS
23.100.20 - Cylinders
Technical Committee
ISO/TC 131/SC 3 - Cylinders
Drafting Committee
ISO/TC 131/SC 3 - Cylinders
Current Stage
9599 - Withdrawal of International Standard
Start Date
09-Sep-2015
Completion Date
13-Dec-2025
Ref Project
SIST ISO 4393:1995 - Fluid power systems and components -- Cylinders -- Basic series of piston strokes

Relations

Revised
ISO 4393:2015 - Fluid power systems and components - Cylinders - Basic series of piston strokes
Effective Date
08-Jun-2013
ISO 4393:1995ISO 4393:1995
PreviousNext
Standard
ISO 4393:1995
English language
4 pages
sale 10% off
Preview
sale 10% off
Preview
e-Library read for
1 day
ISO 4393:1978 - Fluid power systems and components -- Cylinders -- Basic series of piston strokesISO 4393:1978 - Fluid power systems and components -- Cylinders -- Basic series of piston strokes
PreviousNext
Standard
ISO 4393:1978 - Fluid power systems and components -- Cylinders -- Basic series of piston strokes
English language
2 pages
sale 15% off
Preview
sale 15% off
Preview
ISO 4393:1978 - Transmissions hydrauliques et pneumatiques -- Vérins -- Série de base de courses de pistonISO 4393:1978 - Transmissions hydrauliques et pneumatiques -- Vérins -- Série de base de courses de piston
PreviousNext
Standard
ISO 4393:1978 - Transmissions hydrauliques et pneumatiques -- Vérins -- Série de base de courses de piston
French language
2 pages
sale 15% off
Preview
sale 15% off
Preview
ISO 4393:1978 - Transmissions hydrauliques et pneumatiques -- Vérins -- Série de base de courses de pistonISO 4393:1978 - Transmissions hydrauliques et pneumatiques -- Vérins -- Série de base de courses de piston
PreviousNext
Standard
ISO 4393:1978 - Transmissions hydrauliques et pneumatiques -- Vérins -- Série de base de courses de piston
French language
2 pages
sale 15% off
Preview
sale 15% off
Preview

Frequently Asked Questions

ISO 4393:1978 is a standard published by the International Organization for Standardization (ISO). Its full title is "Fluid power systems and components - Cylinders - Basic series of piston strokes". This standard covers: It specifies the preferred series of piston strokes for application to single-acting and double-acting, hydraulic and pneumatic fluid power cylinders. The figure shows the identification of piston strokes. It tabulates piston strokes from 25 mm up to and including 500 mm. If an extension of the series shown is required, use the rounded-off R 10 series of values as shown in ISO 497.

It specifies the preferred series of piston strokes for application to single-acting and double-acting, hydraulic and pneumatic fluid power cylinders. The figure shows the identification of piston strokes. It tabulates piston strokes from 25 mm up to and including 500 mm. If an extension of the series shown is required, use the rounded-off R 10 series of values as shown in ISO 497.

ISO 4393:1978 is classified under the following ICS (International Classification for Standards) categories: 23.100.20 - Cylinders. The ICS classification helps identify the subject area and facilitates finding related standards.

ISO 4393:1978 has the following relationships with other standards: It is inter standard links to ISO 4393:2015. Understanding these relationships helps ensure you are using the most current and applicable version of the standard.

You can purchase ISO 4393:1978 directly from iTeh Standards. The document is available in PDF format and is delivered instantly after payment. Add the standard to your cart and complete the secure checkout process. iTeh Standards is an authorized distributor of ISO standards.

Standards Content (Sample)


2003-01.Slovenski inštitut za standardizacijo. Razmnoževanje celote ali delov tega standarda ni dovoljeno.Fluidna tehnika - Valji - Osnovna vrsta batnih gibovTransmissions hydrauliques et pneumatiques -- Vérins -- Série de base de courses de pistonFluid power systems and components -- Cylinders -- Basic series of piston strokes23.100.20CylindersICS:Ta slovenski standard je istoveten z:ISO 4393:1978SIST ISO 4393:1995en01-avgust-1995SIST ISO 4393:1995SLOVENSKI
STANDARD
INTERNATIONAL STANDARD 4393 INTERNATIONAL ORGANIZATION FOR STANDARDIZATION.MEWYHAPO~HAR OPI-AHM3AqMR fl0 CTAH,QAPTM3A~4lVl.ORGANlSATlON INTERNATIONALE DE NORMALISATION Fluid power Systems and components - Cylinders - Basic series of Piston strokes Transmissions h ydrauliques et Pneuma tiques - W-ins - S&ie de base de courses de Piston First edition .- 1978-09-01 UDC 621.8.032 : 62-242 Ref. No. ISO 4393-1978 (E) Descriptors : hydraulic cylinders, pneumatic cylinders, pistons, classification. Price based on 2 pages SIST ISO 4393:1995

ISO (the International Organization for Standardization) is a worldwide federation of national Standards institutes (ISO member bodies). The work of developing International Standards is carried out through ISO technical committees. Every member body interested in a subject for which a technical committee has been set up has the right to be represented on that committee. International organizations, governmental and non-governmental, in liaison with ISO, also take part in the.work. Draft International Standards adopted by the technical committees are circulated to the member bodies for approval before their acceptance as International Standards by the ISO Council. International Standard ISO 4393 was developed by Technical Committee lSO/TC 131, Fluid power Systems and components, and was circulated to the member bodies in March 1977. lt has been approved by the member bodies of the following countries : Australia Germany Austria Hungary Belgium India grazil Iran Chile Italy Czechoslovakia Japan Egypt, Arab Rep. of Korea, Rep. of Finland Mexico France Netherlands Poland Romania South Africa, Rep. of Spain Sweden Switzerland Turkey h)nited Kingdom U .S.A. No member body expressed disappr
...


INTERNATIONAL STANDARD
INTERNATIONAL ORGANIZATION FOR STANDARDIZATION.MEWYHAPO~HAR OPI-AHM3AqMR fl0 CTAH,QAPTM3A~4lVl.ORGANlSATlON INTERNATIONALE DE NORMALISATION
Fluid power Systems and components - Cylinders -
Basic series of Piston strokes
Transmissions h ydrauliques et Pneuma tiques - W-ins - S&ie de base de courses de Piston
First edition .- 1978-09-01
Ref. No. ISO 4393-1978 (E)
UDC 621.8.032 : 62-242
hydraulic cylinders, pneumatic cylinders, pistons, classification.
Descriptors :
Price based on 2 pages
ISO (the International Organization for Standardization) is a worldwide federation
of national Standards institutes (ISO member bodies). The work of developing
International Standards is carried out through ISO technical committees. Every
member body interested in a subject for which a technical committee has been set
International organizations,
up has the right to be represented on that committee.
governmental and non-governmental, in liaison with ISO, also take part in the.work.
Draft International Standards adopted by the technical committees are circulated
to the member bodies for approval before their acceptance as International
Standards by the ISO Council.
International Standard ISO 4393 was developed by Technical Committee
lSO/TC 131, Fluid power Systems and components, and was circulated to the
member bodies in March 1977.
lt has been approved by the member bodies of the following countries :
Poland
Australia Germany
Hungary Romania
Austria
India South Africa, Rep. of
Belgium
Iran Spain
grazil
Sweden
Chile Italy
Japan Switzerland
Czechoslovakia
Korea, Rep. of Turkey
Egypt, Arab Rep. of
Mexico h)nited Kingdom
Finland
Netherlands U .S.A.
France
No member body expressed disapproval of the document.
Q International Organkation for Standardkation, 1978 l
Printed in Switzerland
-
ISO 4393-1978 (E)
INTERNATIONAL STANDARD
Fluid power Systems and components - Cylinders -
Basic series of Piston strokes
0 INTRODU
...


NORME INTERNATIONALE 4393
INTFRNATIONAL ORGANIZATION FOR sTANDARDIZATIO~ME)KL1YHAPO~HA~ OfTAHH3AlJHR fl0 CTAH~APTH3AU13H~RGANlSATlON INTERNATIONALE DE NORMALISATICJN
Transmissions hydrauliques et pneumatiques - Vérins -
Skie de base de courses de piston
Fluid power systems and components - Cylinders - Basic series of piston strokes
Première Édition - 1978-09-01
CDU 621.8.032 : 62-242 RAf. no : ISO 4393-1978 (F)
Descriptwrs : vérin hydraulique, vérin pneumatique, piston, classification.
Prix basé sur 2 pages
AVANT-PROPOS
L’ISO (Organisation internationale de normalisation) est une fédération mondiale
d’organismes nationaux de normalisation (comités membresde I’ISO). L’élaboration
des Normes internationales est confiée aux comités techniques de I’ISO. Chaque
comité membre intéressé par une étude a le droit de faire partie du comité technique
correspondant. Les organisations internationales, gouvernementales et non
gouvernementales, en liaison avec I’ISO, participent également aux travaux.
Les projets de Normes internationales adoptés par les comités techniques sont
soumis aux comités membres pour approbation, avant leur acceptation comme
Normes internationales par le Conseil de I’ISO.
La Norme internationale ISO 4393 a été élaborée par le comité technique
lSO/TC 131, Transmissions hydrauliques et pneumatiques, et a été soumise aux
comités membres en mars 1977.
Les comités membres des pays suivants l’ont approuvée :
Afrique du Sud, Rép. d’ Espagne Pays-Bas
Allemagne Finlande Pologne
Australie France Roumanie
Royaume-Uni
Autriche Hongrie
Suède
Belgique’ Inde
Suisse
Brésil Iran
Tchécoslovaquie
Chili Italie
Turquie
Corée, Rép. de Japon
Mexique U.S.A.
Égypte, Rép. arabe d’
Aucun comité membre ne l’a désapprouvée.
0 Organisation internationale de normalisation, 1978 l
Imprimé en Suisse
ISO 4393-1978 (F)
NORME INTERNATIONALE
Transmissions hydrauliques et pneumatiques - Vérins -
Série de base de courses de piston
0 INTRODUCTION
Dans les systèmes de transmissions hydrauliques ou pneu-
matiques, l’énergie est transmise et comma
...


NORME INTERNATIONALE 4393
INTFRNATIONAL ORGANIZATION FOR sTANDARDIZATIO~ME)KL1YHAPO~HA~ OfTAHH3AlJHR fl0 CTAH~APTH3AU13H~RGANlSATlON INTERNATIONALE DE NORMALISATICJN
Transmissions hydrauliques et pneumatiques - Vérins -
Skie de base de courses de piston
Fluid power systems and components - Cylinders - Basic series of piston strokes
Première Édition - 1978-09-01
CDU 621.8.032 : 62-242 RAf. no : ISO 4393-1978 (F)
Descriptwrs : vérin hydraulique, vérin pneumatique, piston, classification.
Prix basé sur 2 pages
AVANT-PROPOS
L’ISO (Organisation internationale de normalisation) est une fédération mondiale
d’organismes nationaux de normalisation (comités membresde I’ISO). L’élaboration
des Normes internationales est confiée aux comités techniques de I’ISO. Chaque
comité membre intéressé par une étude a le droit de faire partie du comité technique
correspondant. Les organisations internationales, gouvernementales et non
gouvernementales, en liaison avec I’ISO, participent également aux travaux.
Les projets de Normes internationales adoptés par les comités techniques sont
soumis aux comités membres pour approbation, avant leur acceptation comme
Normes internationales par le Conseil de I’ISO.
La Norme internationale ISO 4393 a été élaborée par le comité technique
lSO/TC 131, Transmissions hydrauliques et pneumatiques, et a été soumise aux
comités membres en mars 1977.
Les comités membres des pays suivants l’ont approuvée :
Afrique du Sud, Rép. d’ Espagne Pays-Bas
Allemagne Finlande Pologne
Australie France Roumanie
Royaume-Uni
Autriche Hongrie
Suède
Belgique’ Inde
Suisse
Brésil Iran
Tchécoslovaquie
Chili Italie
Turquie
Corée, Rép. de Japon
Mexique U.S.A.
Égypte, Rép. arabe d’
Aucun comité membre ne l’a désapprouvée.
0 Organisation internationale de normalisation, 1978 l
Imprimé en Suisse
ISO 4393-1978 (F)
NORME INTERNATIONALE
Transmissions hydrauliques et pneumatiques - Vérins -
Série de base de courses de piston
0 INTRODUCTION
Dans les systèmes de transmissions hydrauliques ou pneu-
matiques, l’énergie est transmise et comma
...

Questions, Comments and Discussion

Ask us and Technical Secretary will try to provide an answer. You can facilitate discussion about the standard in here.

Loading comments...

This May Also Interest You

ISO
ISO 8133:2022(Main)
Hydraulic fluid power - Mounting dimensions for accessories for single rod cylinders, 16 MPa (160 bar) compact series

This document specifies the mounting dimensions required for interchangeability of accessories for 16 MPa (160 bar) compact cylinders conforming to ISO 6020‑2. The accessories have been designed specifically for use with cylinders manufactured in accordance with ISO 6020‑2, but this does not limit their application[1]. This document covers the following accessories, identified in accordance with ISO 6099: - AP6 - rod eye spherical, female thread (see Figure 1 and Table 1); - AB5 - clevis bracket, spherical eye, in angle (see Figure 2 and Table 2); - AA6-L - pivot pin, spherical bearing, locking plate (see Figure 3 and Table 3); - AL6 - locking plate for pivot pin (see Figure 4 and Table 4); - AP2 - rod clevis, female thread (see Figure 5 and Table 5); - AP4 - rod eye plain, female thread (see Figure 6 and Table 6); - AB2 - eye bracket (see Figure 7 and Table 7); - AB4 - clevis bracket, straight (see Figure 8 and Table 8); - AA4-S - pivot pin, plain (split pins) (see Figure 9 and Table 9); - AA4-R - pivot pin, plain (rings) (see Figure 10 and Table 10); - AT4 - trunnion bracket (see Figure 11 and Table 11). These accessories are used on hydraulic cylinders for mechanically transmitting the cylinder force. The design of these accessories is based on the maximum forces resulting from the specified internal diameters of the cylinders and pressures according to ISO 3320 and ISO 2944. This document only applies to the dimensional criteria of products manufactured in conformity with this document; it does not apply to their functional characteristics. [1] 1 bar = 0,1 MPa = 105 Pa; 1 MPa = 1 N/mm2

  • Standard
    14 pages
    English language
    sale 15% off
  • Standard
    15 pages
    French language
    sale 15% off
ISO
ISO 8132:2022(Main)
Hydraulic fluid power - Mounting dimensions for accessories for single rod cylinders, 16 MPa (160 bar) medium and 25 MPa (250 bar) series

This document specifies the mounting dimensions required for the interchangeability of accessories for 16 MPa (160 bar) medium series cylinders in accordance with ISO 6020‑1 and for 25 MPa (250 bar) series cylinders in accordance with ISO 6022. The accessories have been designed specifically for use with cylinders manufactured in accordance with ISO 6020‑1 and ISO 6022, but this does not limit their application[1]. This document covers the following accessories, identified in accordance with ISO 6099: - AP2 - rod clevis, female thread (see Figure 1 and Table 1); - AF3 - rod flange, circular (see Figure 2 and Table 2); - AB4 - clevis bracket, straight (see Figure 3 and Table 3); - AB3 - clevis bracket, in angle (see Figure 4 and Table 4); - AT4 - trunnion bracket (see Figure 5 and Table 5); - AA4-R - pivot pin, plain bearing (snap ring type) (see Figure 6 and Table 6); - AA4-S - pivot pin, plain bearing (split pin type) (see Figure 7 and Table 7); - AA6-R - pivot pin, spherical bearing (snap ring type) (see Figure 6 and Table 6); - AA6-S - pivot pin, spherical bearing (split pin type) (see Figure 7 and Table 7); - AP6 - rod eye spherical, female thread (see Figure 8 and Table 8); - AP4 - rod eye plain, female thread (see Figure 9 and Table 9). These accessories are used on hydraulic cylinders for mechanically transmitting the cylinder force. The design of these accessories is based on the maximum forces resulting from the specified internal diameters of the cylinders and pressures according to ISO 3320 and ISO 2944. This document applies only to the dimensional criteria of products manufactured in conformity with this document; it does not apply to their functional characteristics. [1] 1 bar = 0,1 MPa = 105 Pa; 1 MPa = 1 N/mm2.

  • Standard
    14 pages
    English language
    sale 15% off
  • Standard
    14 pages
    French language
    sale 15% off
ISO
ISO/TS 13725:2021(Main)
Hydraulic fluid power - Method for evaluating the buckling load of a hydraulic cylinder

This document specifies a method for the evaluation of the buckling load which: a) takes into account a geometric model of the hydraulic cylinder, meaning it does not treat the hydraulic cylinder as an equivalent column, b) can be used for all types of cylinder mounting and rod end connection specified in Table 2, c) includes a factor of safety, k, to be set by the person performing the calculations and reported with the results of the calculations, d) takes into account possible off-axis loading, e) takes into account the weight of the hydraulic cylinder, meaning it does not neglect all transverse loads applied on the hydraulic cylinder, f) can be implemented as a simple computer program, and g) considers the cylinder fully extended. The method specified is based on the elastic buckling theory and is applicable to single and double acting cylinders that conform to ISO 6020 (all parts), ISO 6022 and ISO 10762. If necessary, finite element analyses can be used to verify as well as to determine the buckling load. The method is not developed for thin-walled cylinders, double-rods or plunger cylinders. The method is not developed for internal (rod) buckling. The friction of spherical bearings is not taken into account. NOTE This method is based mainly on original work by Fred Hoblit[2]. This method has been established in reference to the standard NFPA/T3.6.37[1].

  • Technical specification
    20 pages
    English language
    sale 15% off
  • Technical specification
    20 pages
    French language
    sale 15% off
ISO
ISO 10100:2020(Main)
Hydraulic fluid power - Cylinders - Acceptance tests
SIST ISO 10100:2021

This document specifies acceptance and function tests for hydraulic fluid power cylinders.

  • Standard
    14 pages
    English language
    sale 10% off
    e-Library read for
    1 day
  • Standard
    9 pages
    English language
    sale 15% off
  • Standard
    9 pages
    French language
    sale 15% off
  • Standard
    9 pages
    French language
    sale 15% off
ISO
ISO 6099:2018(Main)
Fluid power systems and components - Cylinders - Identification code for mounting dimensions and mounting types

This document establishes a convention for the identification of mounting dimensions and types used in the mounting of fluid power cylinders. It specifies a code for identifying cylinder mounting, envelope, accessory and connector dimensions, and for cylinder mounting and accessory types. This document does not represent a standard list of all fluid power cylinder mounting and accessory types.

  • Standard
    68 pages
    English language
    sale 15% off
  • Standard
    68 pages
    French language
    sale 15% off
ISO
ISO 8140:2018(Main)
Pneumatic fluid power - Cylinders, 1 000 kPa (10 bar) series - Mounting dimensions of rod-end clevises

This document specifies the mounting dimensions required for interchangeability of rod-end clevises of pneumatic cylinders. The rod-end clevises have been designed specifically for use with 1 000 kPa [10 bar1] series cylinders manufactured in accordance with ISO 6432 and ISO 15552, but this does not limit their application. The clevises are used on piston rods of pneumatic cylinders for mechanically transmitting the cylinder force. The design of the clevises is based on the maximum forces resulting from the specified internal diameter of the cylinders and pressure according to ISO 6432, ISO 15552 and ISO 21287. 1 1 bar = 100 kPa = 105 Pa; 1 Pa = 1 N/m2.

  • Standard
    4 pages
    English language
    sale 15% off
  • Standard
    4 pages
    French language
    sale 15% off
ISO
ISO 8139:2018(Main)
Pneumatic fluid power - Cylinders, 1 000 kPa (10 bar) series - Mounting dimensions of rod-end spherical eyes

This document specifies the mounting dimensions required for interchangeability of rod-end spherical eyes of pneumatic cylinders. The rod-end spherical eyes have been designed specifically for use with 1 000 kPa [10 bar[1]] series cylinders manufactured in accordance with ISO 6432 and ISO 15552, but this does not limit their application. The spherical bearing end eyes are used on piston rods of pneumatic cylinders for mechanically transmitting the cylinder force under oscillatory rotational and tilting movements. The design of the rod-end spherical eyes is based on the maximum forces resulting from the specified internal diameter of the cylinders and pressure according to ISO 6432, ISO 15552 and ISO 21287. [1] 1 bar = 100 kPa = 105 Pa; 1 Pa = 1 N/m2.

  • Standard
    4 pages
    English language
    sale 15% off
  • Standard
    4 pages
    French language
    sale 15% off
ISO
ISO 15552:2018(Main)
Pneumatic fluid power - Cylinders with detachable mountings, 1 000 kPa (10 bar) series, bores from 32 mm to 320 mm - Basic, mounting and accessories dimensions
SIST ISO 15552:2021

ISO 15552:2018 establishes a metric series of basic, mounting and accessories dimensions as required for interchangeability of single or double rod pneumatic cylinders with or without provision for magnetic sensors for a maximum rated pressure of 1 000 kPa (10 bar). ISO 15552:2018 applies to pneumatic cylinders with detachable mountings.

  • Standard
    23 pages
    English language
    sale 10% off
    e-Library read for
    1 day
  • Standard
    18 pages
    English language
    sale 15% off
  • Standard
    20 pages
    French language
    sale 15% off
ISO
ISO 16656:2016(Main)
Hydraulic fluid power - Single rod, short-stroke cylinders with bores from 32 mm to 100 mm for use at 10 MPa (100 bar) - Mounting dimensions
SIST ISO 16656:2021

ISO 16656:2016 establishes mounting dimensions for single rod short-stroke cylinders with bores from 32 mm to 100 mm for use at 10 MPa (100 bar) with or without magnetic functions, as required for interchangeability of these commonly used hydraulic cylinders.

  • Standard
    10 pages
    English language
    sale 10% off
    e-Library read for
    1 day
  • Standard
    5 pages
    English language
    sale 15% off
ISO
ISO 4393:2015(Main)
Fluid power systems and components - Cylinders - Basic series of piston strokes
SIST ISO 4393:2016

ISO 4393:2015 specifies the preferred series of piston strokes for application to single-acting and double-acting fluid power cylinders. These strokes are mainly used for pneumatic cylinders but may also be used for hydraulic cylinders.

  • Standard
    9 pages
    English language
    sale 10% off
    e-Library read for
    1 day
  • Standard
    4 pages
    English language
    sale 15% off
  • Standard
    3 pages
    French language
    sale 15% off