Dental water-based cements — Technical Corrigendum 1

Changes, at both chemical type entries for zinc phosphate in table 1, the erosion limit from 0,1 to 1,0.

Ciments dentaires à base d'eau — Rectificatif technique 1

General Information

Status

Withdrawn

Publication Date

12-May-1993

Withdrawal Date

12-May-1993

ICS

11.060.10 - Dental materials

Technical Committee

ISO/TC 106/SC 1 - Filling and restorative materials

Drafting Committee

ISO/TC 106/SC 1 - Filling and restorative materials

Current Stage

9599 - Withdrawal of International Standard

Completion Date

04-Nov-2003

Ref Project

Relations

Corrects

ISO 9917:1991 - Dental water-based cements

Effective Date

06-Jun-2022

Child

ISO 9917:1991 - Dental water-based cements

Effective Date

15-Apr-2008

Consolidated By

ISO 216:2007 - Writing paper and certain classes of printed matter — Trimmed sizes — A and B series, and indication of machine direction

Effective Date

06-Jun-2022

Buy Standard

Standard

ISO 9917:1991/Cor 1:1993

English language

1 pages

sale 15% off

Preview

sale 15% off

Preview

Standard

ISO 9917:1991/Cor 1:1993

French language

1 pages

sale 15% off

Preview

sale 15% off

Preview

Standard

ISO 9917:1991/Cor 1:1993

French language

1 pages

sale 15% off

Preview

sale 15% off

Preview

Standards Content (Sample)

NORME INTERNATIONALE ISO 9917:1991
RECTIFICATIF TECHNIQUE 1
Publié 1993-05-01
Ciments dentaires à base d’eau
RECTIFICATIF TECHNIQUE 1
Dental water-based cements
TECHNICAL CORRIGENDUM I
Le Rectificatif technique 1 à la Norme internationale ISO 9917:1991 a été élaboré par le comité technique lSO/rC 106,
Produits et matériel pour l’art dentaire, sous-comité SC 1, Produits pour obturation et restauration.
Page 3, tableau I
Pour les deux entrées de type chimique co
...

Questions, Comments and Discussion

Ask us and Technical Secretary will try to provide an answer. You can facilitate discussion about the standard in here.

This May Also Interest You

ISO

ISO 20749:2023(Main)

Dentistry — Pre-capsulated dental amalgam

This document specifies the requirements and test methods for dental amalgam products supplied to the user in capsules, pre-dosed with dental amalgam alloy powder and dental mercury in quantities suitable for the creation of a single dental restoration. This document specifies the requirements and test methods for the capsule and the requirements for packaging and marking. This document is not applicable to other metallic materials in which an alloy powder reacts with an alloy that is liquid at ambient temperature to produce a solid metallic material intended for dental restoration. This document is restricted to dental amalgam products marketed in pre-capsulated form, alone. Other products intended for use in the production of dental amalgam restorations (dental amalgam alloy as a free-flowing powder supplied in bulk masses, dental amalgam alloy powder supplied as compressed tablets and dental mercury sachets) are described in ISO 24234.

Standard
35 pages
English language
sale 15% off
Standard
36 pages
French language
sale 15% off
Draft
39 pages
French language
sale 15% off

ISO

ISO/TS 4640:2023(Main)

Dentistry — Test methods for tensile bond strength to tooth structure

This document gives guidance on substrate selection, storage and handling as well as essential characteristics of tensile bond strength test methods for quality testing of the adhesive bond between restorative dental materials and tooth structure, i.e. enamel and dentine. Some specific test methods for tensile bond strength measurements are given in Annex A. This document does not include requirements for components of adhesive materials and their performance.

Technical specification
16 pages
English language
sale 15% off
Technical specification
17 pages
French language
sale 15% off
Draft
16 pages
English language
sale 15% off
Draft
16 pages
English language
sale 15% off

ISO

ISO 7551:2023(Main)

Dentistry — Endodontic absorbent points

This document specifies the requirements and test methods for sterilized absorbent points used in endodontic procedures. Absorbent points are marketed sterilized or non-sterilized. The requirements apply to absorbent points which have been sterilized once in a manner approved by the manufacturer. This document specifies numerical systems and a colour-coding system for designating the sizes of absorbent points. Clause 7 specifies the labelling and packaging needed, including the instructions for use. A claim by the manufacturer that the contents of the unopened pack are sterile is the responsibility of the manufacturer (see Table 2). This document does not specify requirements or test methods for sterility. NOTE 1 Reference to applicable national regulations can be made. Reference is made to internationally accepted pharmacopoeia. NOTE 2 National requirements can apply. Standards on methods of validating sterilization processes are also available: ISO 11137-1, ISO 11137-2 and ISO 11137-3.

Standard
12 pages
English language
sale 15% off
Standard
13 pages
French language
sale 15% off

ISO

ISO 3107:2022(Main)

Dentistry — Zinc oxide-eugenol cements and non-eugenol zinc oxide cements

This document specifies requirements for zinc oxide-eugenol cements suitable for use in restorative dentistry for temporary cementation, for bases and as temporary restorations. This document also specifies requirements for non-eugenol zinc oxide cements containing zinc oxide and oil(s) other than eugenol for temporary cementation.

Standard
10 pages
English language
sale 15% off
Standard
11 pages
French language
sale 15% off
Draft
10 pages
English language
sale 15% off
Draft
10 pages
English language
sale 15% off
Draft
11 pages
French language
sale 15% off

ISO

ISO 21606:2022(Main)

Dentistry — Elastomeric auxiliaries for use in orthodontics

This document specifies the requirements and their test methods applicable to all elastomeric auxiliaries used for orthodontics both inside and outside the mouth, in conjunction with fixed and removable appliances.

Standard
8 pages
English language
sale 15% off
Standard
9 pages
French language
sale 15% off

ISO

ISO 6877:2021(Main)

Dentistry — Endodontic obturating materials

This document establishes the specifications for the dimensions of various endodontic obturating materials including preformed metal, preformed polymeric-coated metal, polymeric points, thermoplastic obturating material or combinations of the above, suitable for use in the obturation of the root canal system. This document also specifies numerical systems and a colour-coding system for designating the sizes of preformed endodontic obturating points. Dental endodontic obturating points are marketed sterilized or non-sterilized. This document covers the physical attributes expected of such products as supplied. Sterility is not included in this document, and any claim that the product is sterile is the responsibility of the manufacturer (see Table 3). Clause 7 specifies the labelling needed, including the instructions for use. This document does not apply to instruments or apparatus used in conjunction with thermoplastic obturating materials (obturating material that deform with heat). This document is not applicable to materials for support of a coronal restoration.

Standard
17 pages
English language
sale 15% off
Standard
19 pages
French language
sale 15% off
Draft
18 pages
English language
sale 15% off
Draft
20 pages
French language
sale 15% off

ISO

ISO 24234:2021(Main)

Dentistry — Dental amalgam

This document specifies the requirements and test methods for dental amalgam alloy powder and dental mercury that are suitable for the preparation of dental amalgam together with the requirements and test methods for that dental amalgam and the requirements for packaging and marking. NOTE Two of the requirements apply only to dental mercury (as supplied). All of the other requirements apply to the dental amalgam alloy (as supplied) and dental amalgam. This document is not applicable to dental amalgam alloy powder and dental mercury supplied in a pre-capsulated form. This document is not applicable to other metallic materials in which an alloy powder reacts with an alloy that is liquid at ambient temperature to produce a solid metallic material intended for dental restoration. This document applies to products used to make dental amalgam restorations, supplied to the user in the following forms: dental amalgam alloy as a fine free flowing powder, or as a fine powder compacted into tablets and dental mercury in dental mercury sachets (sometimes referred to as dental mercury pillows). The mass of dental mercury in these sachets is limited to the amount required to make a small to medium-sized restoration in a single tooth. This document is not applicable to dental mercury that is supplied in a primary container in an undivided mass that exceeds the amount suitable for a small to medium-sized restoration.

Standard
27 pages
English language
sale 15% off
Standard
29 pages
French language
sale 15% off
Draft
27 pages
English language
sale 15% off
Draft
29 pages
French language
sale 15% off

ISO

ISO 15841:2014/Amd 1:2020(Amendment)

Dentistry — Wires for use in orthodontics — Amendment 1

Standard
1 page
English language
sale 15% off
Standard
1 page
French language
sale 15% off
Draft
1 page
English language
sale 15% off
Draft
1 page
French language
sale 15% off

ISO

ISO 17254:2016/Amd 1:2020(Amendment)

Dentistry — Coiled springs for use in orthodontics — Amendment 1

Standard
1 page
English language
sale 15% off
Standard
1 page
French language
sale 15% off
Draft
1 page
English language
sale 15% off
Draft
1 page
French language
sale 15% off

ISO

ISO 23325:2020(Main)

Dentistry — Corrosion resistance of dental amalgam

This document specifies the requirements for the permissible reduction in strength resulting from crevice corrosion of dental amalgam products that are within the scope of ISO 24234 or ISO 20749. It provides details of the test procedure for determining this.

Standard
13 pages
English language
sale 15% off
Standard
13 pages
English language
sale 15% off
Standard
13 pages
French language
sale 15% off