ISO/TR 10064-5:2005/Cor 1:2006
(Corrigendum)Code of inspection practice — Part 5: Recommendations relative to evaluation of gear measuring instruments — Technical Corrigendum 1
Code of inspection practice — Part 5: Recommendations relative to evaluation of gear measuring instruments — Technical Corrigendum 1
This part of ISO/TR 10064 provides additional information and examples to support the implementation of ISO 18653. It proposes evaluation and calibration procedures for involute, helix, pitch, runout, and tooth thickness measurement processes. Methods are given for evaluation of the condition and alignments of instrument elements such as centres, guideways, probe systems, etc. Recommendations are included for establishment of a proper environment and for statistical data evaluation procedures. It also covers the application of gear artifacts to the estimation of U95 measurement process uncertainty. Guidance on the application of measurement processes to the inspection of product gears is provided, including fitness for use and the recommended limits for U95 uncertainty based upon the accuracy tolerances of product gears to be inspected. Many of its recommendations may also be applicable to the measurement of worms, worm wheels, bevel gears and gear cutting tools.
Code pratique de réception — Partie 5: Recommandations relatives à l'évaluation des instruments de mesure des engrenages — Rectificatif technique 1
Valjasti zobniki – Smernice za pregledovanje – 5. del: Priporočila za vrednotenje merilne negotovosti instrumentov za merjenje zobnikov – Tehnični popravek 1
General Information
Relations
Standards Content (Sample)
SIST-TP ISO/TR 10064-5:2006/TC 1:2006SLOVENSKIdecember 2006
STANDARDValjasti zobniki – Smernice za pregledovanje – 5. del: Priporočila za vrednotenje merilne negotovosti instrumentov za merjenje zobnikov – Tehnični popravek 1Cylindrical gears - Code of inspection practice -
Part 5: Recommendations relative to evaluation of
gear measuring instruments - Technical
Corrigendum 1©
Standard je založil in izdal Slovenski inštitut za standardizacijo. Razmnoževanje ali kopiranje celote ali delov tega dokumenta ni dovoljenoReferenčna številkaSIST-TP ISO/TR 10064-5:2006/TC 1:2006(en)ICS21.200
ICS
21.200 Ref. No. ISO/TR 10064-5:2005/Cor.1:2006(E)©
ISO 2006 – All rights reserved Printed in Switzerland
TECHNICAL REPORT ISO/TR 10064-5:2005 TECHNICAL CORRIGENDUM 1 Published 2006-08-01 INTERNATIONAL ORGANIZATION FOR STANDARDI
...
Questions, Comments and Discussion
Ask us and Technical Secretary will try to provide an answer. You can facilitate discussion about the standard in here.