ISO 2737:1973
(Main)Permeable sintered metal materials - Determination of oil content
Permeable sintered metal materials - Determination of oil content
Matériaux en métal fritté perméable — Détermination de la teneur en huile
General Information
Relations
Frequently Asked Questions
ISO 2737:1973 is a standard published by the International Organization for Standardization (ISO). Its full title is "Permeable sintered metal materials - Determination of oil content". This standard covers: Permeable sintered metal materials - Determination of oil content
Permeable sintered metal materials - Determination of oil content
ISO 2737:1973 is classified under the following ICS (International Classification for Standards) categories: 77.160 - Powder metallurgy. The ICS classification helps identify the subject area and facilitates finding related standards.
ISO 2737:1973 has the following relationships with other standards: It is inter standard links to ISO 2738:1987. Understanding these relationships helps ensure you are using the most current and applicable version of the standard.
You can purchase ISO 2737:1973 directly from iTeh Standards. The document is available in PDF format and is delivered instantly after payment. Add the standard to your cart and complete the secure checkout process. iTeh Standards is an authorized distributor of ISO standards.
Standards Content (Sample)
INTERNATIONAL STANDARD @ 'ax& 2737
INTERNATIONAL ORGANIZATION FOR STANOARDIZATION MEXnYHAPOnHAR OPïAHH3AUWII il0 ~AHJlAF'TW3AU~.OROANISATlON INTERNATIONALE DE NORMALISATION
Permeable sintered m
content
First edition - 1973-10-01
UDC 669-492.8 : 620.2 : 531.73
Ref. No. IS0 2737-1973 (E)
Descriptors : sintered products, porous materials, determination of content, oils.
Price based on 1 page
I
FOREWORD
IS0 (the loternational Organization for Standardization) is a worldwide federation
of national standards institutes (IS0 Member Bodies). The work of developing
International Standards is carried out through ISQ Technical Committees. Every
Member Body interested in a subject for which a Technical Committee has been set
up has the right to be represented on that Committee. International organizations,
governmental and non-governmental, in liaison with ISO, also take part in the work.
Draft International Standards adopted by the Technical Committees are circulated
to the Member Bodies for approval before their acceptance as International
Standards by the IS0 Council.
International Standard IS0 2737 was drawn up by Technical Committee
ISO/TC 119, Powder metallurgical materials and products, and circulated to the
Member Bodies in July 1972,
It has been approved by the Member Bodies of the following countries :
Australia Ireland South Africa, Rep. of
Austria Italy Spain
Canada /Japan Sweden
Egypt, Arab Rep. of Mexico Thailand
France Portugal U.S.A.
Germany Romania
The Member Body of the following country expressed disapproval of the document
on technical grounds :
United Kingdom
O International Organization for Standardization, 1973 0
Printed in Switzerland
INTERNATIONAL STANDARD IS0 2737-1973 (E)
Permeable sintered metal materials - Determination of oil
content
7 EXPRESSION OF RESULTS
1 SCOPE AND FIELD OF APPLICATION
The oil content is given by the following formulae :
This International Standard specifies a method for the
determination of the oil content of permeable sintered
a) as a percentage by mass :
metal materials.
m, -m2
It applies in particular to the determination of the oil
x 100
content in
...
NORME INTERNATIONALE @ 2737
‘wm
INTERNATIONAL ORGANIZATION FOR STANDARDIZATION *MEXAYHAPOnHAR OPrAHH3AUAR ii0 CTAH~APTH3ALIHH.ORGANlSATlON INTERNATIONALE DE NORMALISATION
Matériaux en métal fritté perméable - Détermination de la
teneur en huile
Premiere édition - 1973-10-01
CDU 669-492.8 : 620.2 : 531.73
Réf. NO : IS0 2737-1973 (F)
Descripteurs : produit fritté, matériau poreux, dosage, huile.
Prix basé sur 1 page
AVANT-PROPOS
IS0 (Organisation Internationale de Normalisation) est une fédération mondiale
d'organismes nationaux de normalisation (Comités Membres 60). L'élaboration de
Normes Internationales est confiée aux Comités Techniques ISO. Chaque Comité
Membre intéressé par une étude a le droit de faire partie du Comité Technique
correspondant. Les organisations internationales, gouvernementales et non
gouvernementales, en liaison avec I'ISO, participent également aux travaux.
Les Projets de Normes Internationales adoptés par les Comités Techniques sont
soumis aux Comités Membres pour approbation, avant leur acceptation comme
Normes Internationales par le Conseil de I'ISO.
La Norme Internationale IS0 2737 a été établie par le Comité Technique
ISO/TC 11 9, Matièrespremières et produits de la métallurgie des poudres, et soumis
aux Comités Membres en juillet 1972.
Elle a été approuvée par les Comités Membres des pays suivants :
Afrique du Sud, Rép. d' Espagne Portugal
Allemagne France Roumanie
Australie ?Ilande Suède
Italie Thaïlande
Autriche
Japon U.S.A.
Canada
Egypte, Rép. arabe d' Mexique
Le Comité Membre du pays suivant a désapprouvé le document pour des raisons
techniques :
Royaume-Uni
8 Oigsnisation Internationale da Normalisation, 1973
Imprim6 en Suisse
NORME INTERNATIONALE IS0 2737-1973 (F)
teneur en huile
1 OBJET ET DOMAINE D'APPLICATION 7 EXPRESSION DES RÉSULTATS
La teneur en huile est donnée par les formules suivantes :
La présente Norme Internationale spécifie une méthode
pour déterminer la teneur en huile des matériaux en métal
a) en pourcentage en masse :
fritté perméable.
ml -m2
Elle s'applique plus particulièrement au controle de la x 100
ml
teneur en huile des coussinets auto-lubrifiants.
b) en pourcentage du volume :
z RÉFÉRENCE
ml -m2
x 100
IS
...
Questions, Comments and Discussion
Ask us and Technical Secretary will try to provide an answer. You can facilitate discussion about the standard in here.
Loading comments...