ISO 10247:1990/Amd 1:2006
(Amendment)Conveyor belts - Characteristics of covers - Classification - Amendment 1
Conveyor belts - Characteristics of covers - Classification - Amendment 1
Courroies transporteuses — Caractéristiques des revêtements — Classification — Amendement 1
Naprave za kontinuirni transport - Trakovi tračnih transporterjev - Lastnosti površinskih prevlek - Razporeditev - Dopolnilo 1
General Information
- Status
- Published
- Publication Date
- 11-Jan-2006
- Technical Committee
- ISO/TC 41/SC 3 - Conveyor belts
- Drafting Committee
- ISO/TC 41/SC 3 - Conveyor belts
- Current Stage
- 6060 - International Standard published
- Start Date
- 12-Jan-2006
- Due Date
- 21-Oct-2007
- Completion Date
- 21-Oct-2007
Relations
- Consolidated By
ISO 12460-4:2016 - Wood-based panels - Determination of formaldehyde release - Part 4: Desiccator method - Effective Date
- 17-Dec-2022
- Effective Date
- 06-Jun-2022
- Effective Date
- 12-May-2008
- Effective Date
- 15-Apr-2008
Overview
ISO 10247:1990/Amd 1:2006 is an amendment to the international standard that defines the classification of conveyor belt cover characteristics. Amendment 1 clarifies the standard's scope by explicitly stating that it is not applicable to light conveyor belts as defined in ISO 21183-1. The amendment also adds ISO 21183-1 to the bibliographical references in Annex A. The change was prepared by ISO/TC 41 (Pulleys and belts), Subcommittee SC 3 (Conveyor belts).
This document is relevant for manufacturers, specifiers, procurement teams and quality engineers working with conveyor belts in industrial and bulk-material handling applications. It provides a harmonized reference for classifying cover materials and communicating requirements across suppliers and users.
Key Topics
- Classification of cover characteristics: Establishes a common framework to describe the properties of belt covers for selection and specification.
- Scope clarification: Amendment 1 explicitly excludes light conveyor belts; users should consult ISO 21183-1 for those products.
- Bibliographic update: Adds ISO 21183-1 to Annex A to guide practitioners to the relevant companion standard.
- Standards governance: Prepared by ISO/TC 41 SC 3, ensuring alignment with committee-level expertise for pulleys and belts.
Applications
This amendment and the underlying standard are useful for:
- Material selection: Use the classification to compare cover types and select materials that meet operational needs (abrasion resistance, chemical exposure, temperature ranges) without relying on inconsistent terminology.
- Procurement and specification: Create clear purchase specifications and tender documents referencing ISO 10247 and, where applicable, ISO 21183-1 to avoid ambiguity.
- Quality control and inspection: Standardized classification supports consistent acceptance criteria and supplier verification.
- Regulatory and compliance checks: Facilitates conformity assessment and documentation when demonstrating adherence to international best practices.
Related Standards
- ISO 21183-1 - Light conveyor belts: principal characteristics and applications (now referenced by Amendment 1). Consult this standard when specifying or assessing light conveyor belts.
- Other ISO publications on conveyor systems and belt components may be relevant depending on application and industry sector.
For practitioners, the practical value of ISO 10247:1990/Amd 1:2006 lies in improved clarity when classifying conveyor belt covers, stronger alignment between suppliers and users, and a direct pointer to the appropriate standard for light belts (ISO 21183-1). Always cross-reference both documents when developing specifications or conducting technical evaluations.
Frequently Asked Questions
ISO 10247:1990/Amd 1:2006 is a standard published by the International Organization for Standardization (ISO). Its full title is "Conveyor belts - Characteristics of covers - Classification - Amendment 1". This standard covers: Conveyor belts - Characteristics of covers - Classification - Amendment 1
Conveyor belts - Characteristics of covers - Classification - Amendment 1
ISO 10247:1990/Amd 1:2006 is classified under the following ICS (International Classification for Standards) categories: 53.040.20 - Components for conveyors. The ICS classification helps identify the subject area and facilitates finding related standards.
ISO 10247:1990/Amd 1:2006 has the following relationships with other standards: It is inter standard links to ISO 12460-4:2016, ISO 10247:1990; is excused to SIST ISO 10247:1997, ISO 10247:1990. Understanding these relationships helps ensure you are using the most current and applicable version of the standard.
You can purchase ISO 10247:1990/Amd 1:2006 directly from iTeh Standards. The document is available in PDF format and is delivered instantly after payment. Add the standard to your cart and complete the secure checkout process. iTeh Standards is an authorized distributor of ISO standards.
Standards Content (Sample)
INTERNATIONAL ISO
STANDARD 10247
First edition
1990-11-15
AMENDMENT 1
2006-01-15
Conveyor belts — Characteristics of
covers — Classification
AMENDMENT 1
Courroies transporteuses — Caractéristiques des revêtements —
Classification
AMENDEMENT 1
Reference number
ISO 10247:1990/Amd.1:2006(E)
©
ISO 2006
ISO 10247:1990/Amd.1:2006(E)
PDF disclaimer
This PDF file may contain embedded typefaces. In accordance with Adobe's licensing policy, this file may be printed or viewed but
shall not be edited unless the typefaces which are embedded are licensed to and installed on the computer performing the editing. In
downloading this file, parties accept therein the responsibility of not infringing Adobe's licensing policy. The ISO Central Secretariat
accepts no liability in this area.
Adobe is a trademark of Adobe Systems Incorporated.
Details of the software products used to create this PDF file can be found in the General Info relative to the file; the PDF-creation
parameters were optimized for printing. Every care has been taken to ensure that the file is suitable for use by ISO member bodies. In
the unlikely event that a problem relating to it is found, please inform the Central Secretariat at the address given below.
© ISO 2006
All rights reserved. Unless otherwise specified, no part of this publication may be reproduced or utilized in any form or by any means,
electronic or mechanical, including photocopying and microfilm, without permission in writing from either ISO at the address below or
ISO's member body in the country of the requester.
ISO copyright office
Case postale 56 • CH-1211 Geneva 20
Tel. + 41 22 749 01 11
Fax + 41 22 749 09 47
E-mail copyright@iso.org
Web www.iso.org
Published in Switzerland
ii © ISO 2006 – All rights reserved
ISO 10247:1990/Amd.1:2006(E)
Foreword
ISO (the Int
...
NORME ISO
INTERNATIONALE 10247
Première édition
1990-11-15
AMENDEMENT 1
2006-01-15
Courroies transporteuses —
Caractéristiques des revêtements —
Classification
AMENDEMENT 1
Conveyor belts — Characteristics of covers — Classification
AMENDMENT 1
Numéro de référence
ISO 10247:1990/Amd.1:2006(F)
©
ISO 2006
ISO 10247:1990/Amd.1:2006(F)
PDF – Exonération de responsabilité
Le présent fichier PDF peut contenir des polices de caractères intégrées. Conformément aux conditions de licence d'Adobe, ce fichier
peut être imprimé ou visualisé, mais ne doit pas être modifié à moins que l'ordinateur employé à cet effet ne bénéficie d'une licence
autorisant l'utilisation de ces polices et que celles-ci y soient installées. Lors du téléchargement de ce fichier, les parties concernées
acceptent de fait la responsabilité de ne pas enfreindre les conditions de licence d'Adobe. Le Secrétariat central de l'ISO décline toute
responsabilité en la matière.
Adobe est une marque déposée d'Adobe Systems Incorporated.
Les détails relatifs aux produits logiciels utilisés pour la création du présent fichier PDF sont disponibles dans la rubrique General Info
du fichier; les paramètres de création PDF ont été optimisés pour l'impression. Toutes les mesures ont été prises pour garantir
l'exploitation de ce fichier par les comités membres de l'ISO. Dans le cas peu probable où surviendrait un problème d'utilisation,
veuillez en informer le Secrétariat central à l'adresse donnée ci-dessous.
© ISO 2006
Droits de reproduction réservés. Sauf prescription différente, aucune partie de cette publication ne peut être reproduite ni utilisée sous
quelque forme que ce soit et par aucun procédé, électronique ou mécanique, y compris la photocopie et les microfilms, sans l'accord écrit
de l'ISO à l'adresse ci-après ou du comité membre de l'ISO dans le pays du demandeur.
ISO copyright office
Case postale 56 • CH-1211 Geneva 20
Tel. + 41 22 749 01 11
Fax. + 41 22 749 09 47
E-mail copyright@iso.org
Web www.iso.org
Publié en Suisse
ii © ISO 2006 – Tous droits réservés
ISO 10247:1990/Amd.1:2006(F)
Avant-propos
L'ISO (Organisation internationale de normalisation) est une fédérati
...
SLOVENSKI STANDARD
01-oktober-2020
Naprave za kontinuirni transport - Trakovi tračnih transporterjev - Lastnosti
površinskih prevlek - Razporeditev - Dopolnilo 1
Conveyor belts - Characteristics of covers - Classification
Courroies transporteuses - Caractéristiques des revêtements - Classification
Ta slovenski standard je istoveten z: ISO 10247:1990/Amd 1:2006
ICS:
53.040.20 Deli za transporterje Components for conveyors
2003-01.Slovenski inštitut za standardizacijo. Razmnoževanje celote ali delov tega standarda ni dovoljeno.
INTERNATIONAL ISO
STANDARD 10247
First edition
1990-11-15
AMENDMENT 1
2006-01-15
Conveyor belts — Characteristics of
covers — Classification
AMENDMENT 1
Courroies transporteuses — Caractéristiques des revêtements —
Classification
AMENDEMENT 1
Reference number
ISO 10247:1990/Amd.1:2006(E)
©
ISO 2006
ISO 10247:1990/Amd.1:2006(E)
PDF disclaimer
This PDF file may contain embedded typefaces. In accordance with Adobe's licensing policy, this file may be printed or viewed but
shall not be edited unless the typefaces which are embedded are licensed to and installed on the computer performing the editing. In
downloading this file, parties accept therein the responsibility of not infringing Adobe's licensing policy. The ISO Central Secretariat
accepts no liability in this area.
Adobe is a trademark of Adobe Systems Incorporated.
Details of the software products used to create this PDF file can be found in the General Info relative to the file; the PDF-creation
parameters were optimized for printing. Every care has been taken to ensure that the file is suitable for use by ISO member bodies. In
the unlikely event that a problem relating to it is found, please inform the Central Secretariat at the address given below.
© ISO 2006
All rights reserved. Unless otherwise specified, no part of this publication may be reproduced or utilized in any form or by any means,
electronic or mechanical, including photocopying and microfilm, without permission in writing from either ISO at the address below or
ISO's member body in the country of the request
...
Questions, Comments and Discussion
Ask us and Technical Secretary will try to provide an answer. You can facilitate discussion about the standard in here.
Loading comments...