ISO 20954-1:2019

INTERNATIONAL ISO
STANDARD 20954-1
First edition
2019-07
Digital cameras — Measurement
method for image stabilization
performance —
Part 1:
Optical systems
Caméras numériques — Méthode de mesure de la perfomance de
stabilisation de l'image —
Partie 1: Systèmes optiques
Reference number
ISO 20954-1:2019(E)
©
ISO 2019

---------------------- Page: 1 ----------------------
ISO 20954-1:2019(E)

COPYRIGHT PROTECTED DOCUMENT
© ISO 2019
All rights reserved. Unless otherwise specified, or required in the context of its implementation, no part of this publication may
be reproduced or utilized otherwise in any form or by any means, electronic or mechanical, including photocopying, or posting
on the internet or an intranet, without prior written permission. Permission can be requested from either ISO at the address
below or ISO’s member body in the country of the requester.
ISO copyright office
CP 401 • Ch. de Blandonnet 8
CH-1214 Vernier, Geneva
Phone: +41 22 749 01 11
Fax: +41 22 749 09 47
Email: copyright@iso.org
Website: www.iso.org
Published in Switzerland
ii © ISO 2019 – All rights reserved

---------------------- Page: 2 ----------------------
ISO 20954-1:2019(E)

Contents Page
Foreword .v
Introduction .vi
1 Scope . 1
2 Normative references . 1
3 Terms and definitions . 1
4 Measurement method . 2
4.1 General . 2
4.2 Equipment and environment for measurement . 3
4.2.1 Test chart . 3
4.2.2 Lighting . 3
4.2.3 Temperature and humidity . 4
4.2.4 Vibration generator . 4
4.2.5 Vibration waveform. 7
4.2.6 Shooting distance . 7
4.3 Settings of camera to be measured . 8
4.3.1 Shooting mode . 8
4.3.2 Optical image stabilization mode . 8
4.3.3 Image quality mode (compression ratio) . 8
4.3.4 Image quality mode (number of recorded pixels) . 8
4.3.5 Sensitivity . . .
...