ISO 1496-4:2023
(Main)Series 1 freight containers — Specification and testing — Part 4: Non-pressurized containers for dry bulk
Series 1 freight containers — Specification and testing — Part 4: Non-pressurized containers for dry bulk
This document specifies the basic specifications and testing requirements for series 1 freight containers of the dry bulk container non-pressurized type which are suitable for international exchange and for conveyance by road, rail and sea, including interchange between these forms of transport. As the density and flow characteristics of dry bulk cargoes vary widely, containers conforming to this document are not expected to be suitable for the carriage of all such cargoes. Therefore, except where otherwise stated, the requirements of this document are minimum requirements. The container types covered by this document are given in Table 1. This document does not apply to BK3 flexible bulk containers.
Titre manque
General Information
Relations
Buy Standard
Standards Content (Sample)
INTERNATIONAL ISO
STANDARD 1496-4
Second edition
2023-10
Series 1 freight containers —
Specification and testing —
Part 4:
Non-pressurized containers for dry
bulk
Reference number
ISO 1496-4:2023(E)
© ISO 2023
---------------------- Page: 1 ----------------------
ISO 1496-4:2023(E)
COPYRIGHT PROTECTED DOCUMENT
© ISO 2023
All rights reserved. Unless otherwise specified, or required in the context of its implementation, no part of this publication may
be reproduced or utilized otherwise in any form or by any means, electronic or mechanical, including photocopying, or posting on
the internet or an intranet, without prior written permission. Permission can be requested from either ISO at the address below
or ISO’s member body in the country of the requester.
ISO copyright office
CP 401 • Ch. de Blandonnet 8
CH-1214 Vernier, Geneva
Phone: +41 22 749 01 11
Email: copyright@iso.org
Website: www.iso.org
Published in Switzerland
ii
© ISO 2023 – All rights reserved
---------------------- Page: 2 ----------------------
ISO 1496-4:2023(E)
Contents Page
Foreword .v
Introduction . vi
1 Scope . 1
2 Normative references . 1
3 Terms and definitions . 1
4 Dimensions and ratings . 4
4.1 External dimensions . 4
4.2 Internal dimensions . 4
4.3 Ratings . 4
5 Design requirements .5
5.1 General . 5
5.2 Corner fittings . 5
5.3 Base structure . . . 6
5.4 Floor strength of bulk containers . 7
5.5 End structure . 8
5.6 Side structure . 8
5.7 Walls (box type only) . . 8
5.8 Shell (hopper type only) . 8
5.9 Openings .
...
INTERNATIONAL ISO
STANDARD 1496-4
Second edition
Series 1 freight containers —
Specification and testing —
Part 4:
Non-pressurized containers for dry
bulk
PROOF/ÉPREUVE
Reference number
ISO 1496-4:2023(E)
© ISO 2023
---------------------- Page: 1 ----------------------
ISO 1496-4:2023(E)
COPYRIGHT PROTECTED DOCUMENT
© ISO 2023
All rights reserved. Unless otherwise specified, or required in the context of its implementation, no part of this publication may
be reproduced or utilized otherwise in any form or by any means, electronic or mechanical, including photocopying, or posting on
the internet or an intranet, without prior written permission. Permission can be requested from either ISO at the address below
or ISO’s member body in the country of the requester.
ISO copyright office
CP 401 • Ch. de Blandonnet 8
CH-1214 Vernier, Geneva
Phone: +41 22 749 01 11
Email: copyright@iso.org
Website: www.iso.org
Published in Switzerland
ii
PROOF/ÉPREUVE © ISO 2023 – All rights reserved
---------------------- Page: 2 ----------------------
ISO 1496-4:2023(E)
Contents Page
Foreword .v
Introduction . vi
1 Scope . 1
2 Normative references . 1
3 Terms and definitions . 1
4 Dimensions and ratings . 4
4.1 External dimensions . 4
4.2 Internal dimensions . 4
4.3 Ratings . 4
5 Design requirements .5
5.1 General . 5
5.2 Corner fittings . 5
5.3 Base structure . . . 6
5.4 Floor strength of bulk containers . 7
5.5 End structure . 7
5.6 Side structure . 8
5.7 Walls (box type only) . . 8
5.8 Shell (hopper type only) . 9
5.9 Openings .
...
ISO/PRF 1496-4:2023(E)
ISO/TC 104/SC 2
Date: 2023-07-18
Secretariat: BSI
Date: 2023-08-16
Series 1 freight containers — Specification and testing — —
Part 4:
Non-pressurized containers for dry bulk
FDIS stage
---------------------- Page: 1 ----------------------
ISO/PRF 1496-4:2023(E)
© ISO 2023
All rights reserved. Unless otherwise specified, or required in the context of its implementation, no part of this
publication may be reproduced or utilized otherwise in any form or by any means, electronic or mechanical,
including photocopying, or posting on the internet or an intranet, without prior written permission. Permission can
be requested from either ISO at the address below or ISO’s member body in the country of the requester.
ISO copyright office
CP 401 • Ch. de Blandonnet 8
CH-1214 Vernier, Geneva
Phone: + 41 22 749 01 11
EmailE-mail: copyright@iso.org
Website: www.iso.orgwww.iso.org
Published in Switzerland
ii © ISO 2023 – All rights reserved
ii © ISO 2023 – All rights reserved
---------------------- Page: 2 ----------------------
ISO/PRF 1496-4:2023(E)
Contents
Foreword . vi
Introduction . viii
Part 4: Non-pressurized containers for dry bulk . 1
1 Scope . 1
2 Normative references . 1
3 Terms and definitions . 2
4 Dimensions and ratings . 5
4.1 External dimensions . 5
4.2 Internal dimensions . 5
4.3 Ratings . 5
5 Design requirements . 5
5.1 General . 5
5.2 Corner fittings . 6
5.3 Base structure . 6
5.4 Floor strength of bulk containers . 7
5.5 End structure . 8
5.6 Side structure . 9
5.7 Walls (box type only) . 9
5.8 Shell (hopper type only) . 10
5.9 Openings . 10
5.9.1 General .
...
Questions, Comments and Discussion
Ask us and Technical Secretary will try to provide an answer. You can facilitate discussion about the standard in here.