iTeh StandardsiTeh Standards
EURUSD
Your shopping cart is empty.
ISO

ISO 17325-4:2018

(Main)

Ships and marine technology — Marine environment protection — Oil booms — Part 4: Auxiliary equipment

Ships and marine technology — Marine environment protection — Oil booms — Part 4: Auxiliary equipment

This document specifies basic requirements for the design, layout and application of boom accessories, referred to as auxiliary equipment for the purpose of this document. This document does not purport to address all safety concerns, if any, associated with its use. However, it is the responsibility of the user of this document to establish the appropriate safety and health procedures, and to determine the applicability of regulatory limitations.

Navires et technologie maritime — Protection de l'environnement marin — Barrages de rétention de pétrole — Partie 4: Équipement auxiliaire

General Information

Status
Published
Publication Date
17-Sep-2018
ICS
13.020.99 - Other standards related to environmental protection
47.020.99 - Other standards related to shipbuilding and marine structures
Technical Committee
ISO/TC 8/SC 2 - Marine environment protection
Drafting Committee
ISO/TC 8/SC 2 - Marine environment protection
Current Stage
9092 - International Standard to be revised
Completion Date
02-May-2024
Ref Project

Buy Standard

ISO 17325-4:2018 - Ships and marine technology -- Marine environment protection -- Oil boomsISO 17325-4:2018 - Ships and marine technology -- Marine environment protection -- Oil booms
PreviousNext
Standard
ISO 17325-4:2018 - Ships and marine technology -- Marine environment protection -- Oil booms
English language
12 pages
sale 15% off
Preview
sale 15% off
Preview

Standards Content (Sample)

INTERNATIONAL ISO
STANDARD 17325-4
First edition
2018-09
Ships and marine technology —
Marine environment protection —
Oil booms —
Part 4:
Auxiliary equipment
Navires et technologie maritime — Protection de l'environnement
marin — Barrages de rétention de pétrole —
Partie 4: Équipement auxiliaire
Reference number
ISO 17325-4:2018(E)
©
ISO 2018

---------------------- Page: 1 ----------------------
ISO 17325-4:2018(E)

COPYRIGHT PROTECTED DOCUMENT
© ISO 2018
All rights reserved. Unless otherwise specified, or required in the context of its implementation, no part of this publication may
be reproduced or utilized otherwise in any form or by any means, electronic or mechanical, including photocopying, or posting
on the internet or an intranet, without prior written permission. Permission can be requested from either ISO at the address
below or ISO’s member body in the country of the requester.
ISO copyright office
CP 401 • Ch. de Blandonnet 8
CH-1214 Vernier, Geneva
Phone: +41 22 749 01 11
Fax: +41 22 749 09 47
Email: copyright@iso.org
Website: www.iso.org
Published in Switzerland
ii © ISO 2018 – All rights reserved

---------------------- Page: 2 ----------------------
ISO 17325-4:2018(E)

Contents Page
Foreword .iv
Introduction .v
1 Scope . 1
2 Normative references . 1
3 Terms and definitions . 1
4 General requirements . 1
5 Boom reels . 2
5.1 General . 2
5.2 Basic design requirements . 2
5.3 Operational considerations . 3
5.4 Transport and lifting . 3
6 Inflator for inflatable booms. 3
6.1 General . 3
6.2 Operational considerations . 4
7 Water pump for beach sealing booms . 5
7.1 General . 5
7.2 Design considerations. 5
7.3 Operational considerations . 5
8 Boom anc
...

Questions, Comments and Discussion

Ask us and Technical Secretary will try to provide an answer. You can facilitate discussion about the standard in here.

This May Also Interest You

ISO
ISO 23668:2022(Main)
Ships and marine technology — Marine environment protection — Continuous on-board pH monitoring method

This document specifies the performance requirements and the test procedures for a pH meter used for continuous on-board monitoring using combination electrodes. The pH meter applies to measuring the pH of the following water for on-board consumption and research purposes: a) natural seawater and freshwater, b) freshwater produced from freshwater generators, c) the used process water for running machinery on-board ships. This document also specifies the method for evaluating performance, calibration, and maintenance of a pH meter used for continuous on-board monitoring.

  • Standard
    10 pages
    English language
    sale 15% off
ISO
ISO 21070:2017/Amd 1:2022(Amendment)
Ships and marine technology — Marine environment protection — Management and handling of shipboard garbage — Amendment 1: Updates to classification of garbage
  • Standard
    2 pages
    English language
    sale 15% off
ISO
ISO 23765:2021(Main)
Ships and marine technology — Marine environment protection — Specification for collecting data on ship's fuel oil consumption

This document provides a method for ships of 5 000 gross tonnage (GT) and above to collect data on fuel oil consumption, as required by regulation 22A of MARPOL, Annex VI. It specifies practical methods to measure the fuel oil consumption, the distance travelled and the hours underway. Annex A provides an example of a ship fuel oil consumption data collection plan.

  • Standard
    16 pages
    English language
    sale 15% off
ISO
ISO 21716-1:2020(Main)
Ships and marine technology — Bioassay methods for screening anti-fouling paints — Part 1: General requirements

This document specifies general requirements and common specifications for preparing and aging panels coated with anti-fouling paint to perform laboratory bioassay screening tests against specified organisms. Such tests are given in the other parts of the ISO 21716 series, with which this document is intended to be used. This document is applicable to all anti-fouling paints that prevent or deter the attachment and growth of sessile organisms on a surface through chemical or biological means. It is not applicable to the following: — coatings that deter or prevent fouling solely by physical means such as biocide-free foul release paints; — anti-fouling methods used for controlling harmful marine organisms and pathogenic organisms in ships' ballast water and sediments according to IMO International Convention for the Control and Management of Ships' Ballast Water and Sediments, 2004[7].

  • Standard
    9 pages
    English language
    sale 15% off
ISO
ISO 21716-3:2020(Main)
Ships and marine technology — Bioassay methods for screening anti-fouling paints — Part 3: Mussels

This document specifies a laboratory test method for screening anti-fouling paints in a flow-through system using mussels as the test organism. It is intended to be used in conjunction with ISO 21716-1, which specifies the general requirements. The purpose of the test is to determine if there is a difference in mussel settlement on painted test panels compared with mussel settlement on inert non-toxic control panels under the conditions of the test. Examples of statistical analysis to determine if the difference in mussel settlement is statistically significant are given in Annex A.

  • Standard
    21 pages
    English language
    sale 15% off
ISO
ISO 21716-2:2020(Main)
Ships and marine technology — Bioassay methods for screening anti-fouling paints — Part 2: Barnacles

This document specifies a laboratory test method for screening anti-fouling paints in a flow-through system using barnacle cyprid larvae as the test organism. It is intended to be used in conjunction with ISO 21716-1, which specifies the general requirements. The purpose of the test is to determine if there is a difference in barnacle settlement on painted test panels compared with barnacle settlement on inert non-toxic control panels under the conditions of the test. Examples of statistical analysis to determine if the difference in barnacle settlement is statistically significant are given in Annex A.

  • Standard
    27 pages
    English language
    sale 15% off
ISO
ISO 21963:2020(Main)
Ships and marine technology — Marine environment protection — Tanks and piping systems for facilitating 5 ppm oil-water separation

This document provides requirements and test methods for tanks, piping and separation systems facilitating the separation of contaminated fluids of oil and water on fixed offshore marine structures and ships, where treatment is performed by separation systems that optimize oil-water separation to a concentration equal to or less than 5 ppm. It is applicable to fixed offshore marine structures and to ships operating in designated sea areas determined by the relevant authorities.

  • Standard
    20 pages
    English language
    sale 15% off
ISO
ISO 21072-3:2020(Main)
Ships and marine technology — Marine environment protection: performance testing of oil skimmers — Part 3: High viscosity oil

This document specifies a methodology for establishing quantitative performance data for oil skimmers for recovery of oil with high viscosity (above 50 000 cP), so the end user can objectively judge, compare and evaluate the design and performance of different skimmers. The methodology applies to testing in a basin and requires control of oil properties and oil slick characteristics. The method is applicable to all types of skimmers provided that the equipment dimensions are within the physical limitations of the test basin. The test procedure provides full-scale test results for the unit tested, under controlled conditions, and for one or more classes of highly viscous oil. Attention is drawn to the care required when applying the test results to predict a realistic skimmer performance under field conditions. For dedicated/in-built systems, the test procedures outlined in this document are only applicable to the skimming device as such, not to the entire skimming system.

  • Standard
    10 pages
    English language
    sale 15% off
ISO
ISO 21072-2:2020(Main)
Ships and marine technology — Marine environment protection: performance testing of oil skimmers — Part 2: Light and medium viscosity oil

This document specifies a methodology for establishing quantitative performance data for oil skimmers for recovery of oil with light and medium viscosity (up to 50 000 cP), so the end user can objectively judge, compare, and evaluate the design and performance of different skimmers. The methodology applies to testing in a basin and requires control of oil properties and oil slick characteristics. The method is applicable to all types of skimmers provided that the equipment dimensions are within the physical limitations of the test basin. The test procedure provides the full-scale test results for the unit tested, under controlled conditions, and for one or more classes of oil. Attention is drawn to the care required when applying the test results to predict skimmer performance under field conditions. For dedicated/in-built systems, the test procedures outlined in this document can only be used for the skimming device as such, not for the entire skimming system.

  • Standard
    10 pages
    English language
    sale 15% off
ISO
ISO 17325-3:2018(Main)
Ships and marine technology — Marine environment protection — Oil booms — Part 3: End connectors

This document specifies the requirements for the design of end connectors of oil booms used for the prevention of spreading of oil spills on water. These criteria are intended to define minimum mating characteristics and are not intended to be restricted to a specific configuration. It should be considered that different types of connectors are preferably used in different areas. This document does not define any priority. It remains the responsibility of manufacturers and users to select the right connector for the intended application. Stability features of boom connectors are the result of interaction between bodies of booms and connectors. This document does not purport to address all safety concerns, if any, associated with its use. However, it is the responsibility of the user of this document to establish the appropriate safety and health procedures, and to determine the applicability of regulatory limitations.

  • Standard
    10 pages
    English language
    sale 15% off