ISO 18340:2020

INTERNATIONAL ISO
STANDARD 18340
First edition
2020-07
Endoscopes — Trocar pins, trocar
sleeves and endotherapy devices for
use with trocar sleeves
Endoscopes — Mandrins de trocart, fourreaux de trocart et dispositifs
d'endothérapie à utiliser avec des fourreaux de trocart
Reference number
©
ISO 2020
© ISO 2020
All rights reserved. Unless otherwise specified, or required in the context of its implementation, no part of this publication may
be reproduced or utilized otherwise in any form or by any means, electronic or mechanical, including photocopying, or posting
on the internet or an intranet, without prior written permission. Permission can be requested from either ISO at the address
below or ISO’s member body in the country of the requester.
ISO copyright office
CP 401 • Ch. de Blandonnet 8
CH-1214 Vernier, Geneva
Phone: +41 22 749 01 11
Email: copyright@iso.org
Website: www.iso.org
Published in Switzerland
ii © ISO 2020 – All rights reserved

Contents Page
Foreword .iv
Introduction .v
1 Scope . 1
2 Normative references . 1
3 Terms and definitions . 1
4 Dimensions . 2
4.1 General . 2
4.2 Trocar pin and trocar sleeve . 2
4.3 Endotherapy device for use through a trocar sleeve . 4
4.3.1 Not dismountable endotherapy devices . 5
4.3.2 Dismountable endotherapy devices . 5
4.4 Endotherapy device with spring handle for use through a trocar sleeve . 6
5 Material . 8
6 Marking . 8
Bibliography . 9
Foreword
ISO (the International Organization for Standardization) is a worldwide federation of national standards
bodies (ISO member bodies). The work of preparing International Standards is normally carried out
through ISO technical committees. Each member body interested in a subject for which a technical
committee has been established has the right to be represented on that committee. International
organizations, governmental and non-governmental, in liaison with ISO, also take part in the work.
ISO collaborates closely with the International Electrotechnical Commission (IEC) on all matters of
electrotechnical standardization.
The procedures used to develop this document and those intended for its further maintenance are
described in the ISO/IEC Directives, Part 1. In particular, the different approval criteria needed for the
different types of ISO documents should be noted. This document was drafted in accordance with the
editorial rules of the ISO/IEC Directives, Part 2 (see www .iso .org/ directives).
Attention is drawn to the possibility that some of the elements of this document may be the subject of
patent rights. ISO shall not be held responsible for identifying any or all such patent rights. Details of
any patent rights identified during the development of the document will be in the Introduction and/or
on the ISO list of patent declarations received (see www .iso .org/ patents).
Any trade name used in this document is information given for the convenience of users and does not
constitute an endorsement.
For an explanation of the voluntary nature of standards, the meaning of ISO specific terms and
expressions related to conformity assessment, as well as information about ISO's adherence to the
World Trade Organization (WTO) principles in the Technical Barriers to Trade (TBT), see www .iso .org/
iso/ foreword .html.
This document was prepared by Technical Committee ISO/TC 172 Optics and photonics,
Subcommittee SC 5, Microscopes and endoscopes.
This first edition cancels and replaces the first edition of ISO/TS 18340:2015.
Any feedback or questions on this document should be directed to the user’s national standards body. A
complete listing of these bodies can be found at www .iso .org/ members .html.
iv © ISO 2020 – All rights reserved

Introduction
This document is intended to help manufacturers to produce universally interchangeable and reusable
trocar sleeves and trocar pins and endotherapy devices which are inserted through these trocar sleeves.
INTERNATIONAL STANDARD ISO 18340:2020(E)
Endoscopes — Trocar pins, trocar sleeves and endotherapy
devices for use with trocar sleeves
1 Scope
This document specifies the design, testing and labelling of trocar sleeves and trocar pins that are
universally interchangeable and reusable.
It also specifies the design, testing and labelling of endotherapy devices which are inserted through
these trocar sleeves and are also universally interchangeable and reuseable.
This document specifies the minimum requirements for the production of the products mentioned.
2 Normative references
The following documents, in whole or in part, are normatively referenced in this document and are
indispensable for its application. For dated references, only the edition cited applies. For undated
references, the latest edition of the referenced document (including any amendments) applies.
ISO 8600-1, Endoscopes — Medical endoscopes and endotherapy devices — Part 1: General requirements
ISO 8600-6, Optics and photonics
...