iTeh Standards logo
EURUSD
Your shopping cart is empty.
ISO

ISO 10207:1991/Cor 1:1991

(Corrigendum)

Rock drilling equipment - Rope threaded drill steel equipment for percussive drilling, nominal sizes 22 mm to 38 mm - Technical Corrigendum 1

Rock drilling equipment - Rope threaded drill steel equipment for percussive drilling, nominal sizes 22 mm to 38 mm - Technical Corrigendum 1

Matériel de forage des roches — Équipements pour forage percutant à filetage corde, de dimension nominale 22 mm à 38 mm — Rectificatif technique 1

Oprema za vrtanje v kamnino - Natikalna jeklena vrtalna oprema za udarno vrtanje s standardnimi velikostmi (premeri) od 22 do 38 mm - Tehnični popravek 1

General Information

Status
Published
Publication Date
10-Apr-1991
ICS
73.100.30 - Equipment for drilling and mine excavation
Technical Committee
ISO/TC 82 - Mining
Drafting Committee
ISO/TC 82 - Mining
Current Stage
6060 - International Standard published
Start Date
11-Apr-1991
Completion Date
13-Dec-2025
Ref Project
SIST ISO 10207 TC 1:2000 - Rock drilling equipment - Rope threaded drill steel equipment for percussive drilling, nominal sizes 22 mm to 38 mm - Technical corrigendum 1

Relations

Corrects
ISO 10207:1991 - Rock drilling equipment - Rope threaded drill steel equipment for percussive drilling, nominal sizes 22 mm to 38 mm
Effective Date
06-Jun-2022
Child
SIST ISO 10207:1996 - Rock drilling equipment -- Rope threaded drill steel equipment for percussive drilling, nominal sizes 22 mm to 38 mm
Effective Date
12-May-2008
Child
ISO 10207:1991 - Rock drilling equipment - Rope threaded drill steel equipment for percussive drilling, nominal sizes 22 mm to 38 mm
Effective Date
15-Apr-2008
ISO 10207 TC 1:2000ISO 10207 TC 1:2000
PreviousNext
Corrigendum
ISO 10207 TC 1:2000
English language
1 pages
sale 10% off
Preview
sale 10% off
Preview
e-Library read for
1 day

Frequently Asked Questions

ISO 10207:1991/Cor 1:1991 is a corrigendum published by the International Organization for Standardization (ISO). Its full title is "Rock drilling equipment - Rope threaded drill steel equipment for percussive drilling, nominal sizes 22 mm to 38 mm - Technical Corrigendum 1". This standard covers: Rock drilling equipment - Rope threaded drill steel equipment for percussive drilling, nominal sizes 22 mm to 38 mm - Technical Corrigendum 1

Rock drilling equipment - Rope threaded drill steel equipment for percussive drilling, nominal sizes 22 mm to 38 mm - Technical Corrigendum 1

ISO 10207:1991/Cor 1:1991 is classified under the following ICS (International Classification for Standards) categories: 73.100.30 - Equipment for drilling and mine excavation. The ICS classification helps identify the subject area and facilitates finding related standards.

ISO 10207:1991/Cor 1:1991 has the following relationships with other standards: It is inter standard links to ISO 10207:1991; is excused to SIST ISO 10207:1996, ISO 10207:1991. Understanding these relationships helps ensure you are using the most current and applicable version of the standard.

You can purchase ISO 10207:1991/Cor 1:1991 directly from iTeh Standards. The document is available in PDF format and is delivered instantly after payment. Add the standard to your cart and complete the secure checkout process. iTeh Standards is an authorized distributor of ISO standards.

Standards Content (Sample)


2003-01.Slovenski inštitut za standardizacijo. Razmnoževanje celote ali delov tega standarda ni dovoljeno.Rock drilling equipment - Rope threaded drill steel equipment for percussive drilling, nominal sizes 22 mm to 38 mm - Technical corrigendum 173.100.30Oprema za vrtanje in izkopavanjeEquipment for drilling and mine excavationICS:Ta slovenski standard je istoveten z:ISO 10207:1991/Cor 1:1991SIST ISO 10207 TC 1:2000en01-junij-2000SIST ISO 10207 TC 1:2000SLOVENSKI
STANDARD
INTERNATIONAL STANDARD IS0 10207 : 1991 TECHNICAL CORRIGENDUM 1 Published 1991-04-01 INTERNATIONAL ORGANIZATION FOR STANDARDIZATION. MEXtflYHAPOfiHAR Opt-AHM3AuMFi I-l0 CTAH~APTM3AlJMbl. ORGANISATION INTERNATIONALE DE NORMALISATION Rock d
...

Questions, Comments and Discussion

Ask us and Technical Secretary will try to provide an answer. You can facilitate discussion about the standard in here.

Loading comments...

This May Also Interest You

ISO
ISO 19225:2017/Amd 1:2019(Amendment)
Underground mining machines - Mobile extracting machines at the face - Safety requirements for shearer loaders and plough systems - Amendment 1
  • Standard
    5 pages
    English language
    sale 15% off
  • Standard
    5 pages
    French language
    sale 15% off
ISO
ISO 18758-2:2018(Main)
Mining and earth-moving machinery - Rock drill rigs and rock reinforcement rigs - Part 2: Safety requirements

This document specifies the safety requirements for rock drill rigs and rock reinforcement rigs designed for the following underground or surface operations: a) blast hole drilling; b) rock reinforcement; c) drilling for secondary breaking; d) dimensional stone drilling; e) mineral prospecting, e.g. utilizing core drilling or reverse circulation; f) water and methane drainage drilling; g) raise boring. NOTE Rigs can be designed for more than one of the operations above. See ISO 18758-1 for vocabulary. This document is also applicable to earth-moving machinery as defined in ISO 6165, modified to become a rock drill rig or rock reinforcement rig. This document is not applicable to the following machines: drill rigs for soil and rock mixture; (geothermal drill rigs, water well drill rigs, water jet drill rigs, micro pile drill rigs; surface horizontal directional drill rigs (HDD) as defined in ISO 21467), kelly drill rigs (and casing drivers); cable tool drill rigs; pre-armouring machines; sonic drill rigs; shaft sinking drill rigs; crane attached drill rigs; drill rigs on derricks; scaling machines. This document deals with the significant hazards, hazardous situations or hazardous events, as listed in Annex E, relevant to rock drill rigs and rock reinforcement rigs (see ISO 18758‑1), when they are used as intended and under the conditions of misuse which are reasonably foreseeable by the manufacturer. This document is not applicable to rigs manufactured before the date of its publication.

  • Standard
    57 pages
    English language
    sale 15% off
ISO
ISO 18758-1:2018(Main)
Mining and earth-moving machinery - Rock drill rigs and rock reinforcement rigs - Part 1: Vocabulary

This document defines terms relating to rock drill rigs and rock reinforcement rigs, including their intended use, working methods, types, and main components. It also provides (see Annex A) several classifications of rock drill rigs, based on intended use, mobility and type of operation. The primary use of this document is in instruction handbooks for rock drill rigs and in marketing material. Safety related terminology is used in ISO 18758‑2. This document is not applicable to drill rigs for soil and rock mixture. NOTE Documents covering vocabulary of related subjects are found in the bibliography.

  • Standard
    20 pages
    English language
    sale 15% off
ISO
ISO 19224:2017(Main)
Continuous surface miners (CSM) - Safety requirements

ISO 19224:2017 deals with safety requirements for continuous surface miners (CSM). It specifies common requirements for the design and construction of CSM to protect workers from accidents and health hazards that can occur during operation, loading, transport and maintenance. ISO 19224:2017 deals with known significant hazards, hazardous situations or hazardous events relevant to CSM, when they are used as intended and under conditions of misuse which are reasonably foreseeable by the manufacturer (see Annex A). ISO 19224:2017 also specifies the appropriate technical measures to eliminate or reduce risks arising from the significant hazards as identified in Annex A. ISO 19224:2017 is not applicable to CSM manufactured before the date of its publication.

  • Standard
    15 pages
    English language
    sale 15% off
ISO
ISO 19225:2017(Main)
Underground mining machines - Mobile extracting machines at the face - Safety requirements for shearer loaders and plough systems

ISO 19225:2017 specifies safety requirements to minimize the hazards listed in Clause 4 that can occur during the assembly, use, maintenance, repair, decommissioning, disassembly and disposal of shearer loaders and plough systems when used as intended and under conditions of misuse which are reasonably foreseeable by the manufacturer, in underground mining. ISO 19225:2017 does not cover any hazards resulting from explosive atmospheres. Requirements for explosive atmospheres can be found in ISO/IEC 80079‑38. ISO 19225:2017 is not applicable to machines that are manufactured before the date of its publication.

  • Standard
    26 pages
    English language
    sale 15% off
  • Standard
    28 pages
    French language
    sale 15% off
ISO
ISO 10097-2:1999(Main)
Wireline diamond core drilling equipment - System A - Part 2: Inch units
SIST ISO 10097-2:2001

This part of ISO 10097 specifies the nomenclature and the leading dimensions necessary for the interchangeability of the following wireline drilling equipment for drilling holes of diameter 1,890 in to 3,790 in, yielding cores of diameter 1,063 in to 2,500 in. The equipment is illustrated in Figure 1 and comprises the following: a) core bit; b) reaming shell; c) core lifter; d) core lifter case; e) outer tube; f) inner tube; g) drill rod (smooth pipe only).

  • Standard
    12 pages
    English language
    sale 10% off
    e-Library read for
    1 day
  • Standard
    12 pages
    English language
    sale 15% off
ISO
ISO 10097-1:1999(Main)
Wireline diamond core drilling equipment - System A - Part 1: Metric units
SIST ISO 10097-1:2001

This part of ISO 10097 specifies the nomenclature and the leading dimensions necessary for the interchangeability of the following wireline drilling equipment for drilling holes 48 mm to 96 mm in diameter, yielding cores of 27 mm to 63 mm in diameter. The equipment is illustrated in Figure 1 and comprises the following: a) core bit; b) reaming shell; c) core lifter; d) core lifter case; e) outer tube; f) inner tube; g) drill rod (smooth pipe only).

  • Standard
    12 pages
    English language
    sale 10% off
    e-Library read for
    1 day
  • Standard
    12 pages
    English language
    sale 15% off
ISO
ISO 10098:1992(Main)
Wireline diamond core drilling equipment - System CSSK
SIST ISO 10098:1995

Specifies the material for and dimensions of equipment for drilling in solid or weakly fissured medium hard or hard formations to depths of 1200 m to 1500 m. Applies to equipment with outer bit diameters of 46 mm, 59 mm, 76 mm and 93 mm with corresponding core diameters from 24 mm to 59 mm.

  • Standard
    33 pages
    English language
    sale 10% off
    e-Library read for
    1 day
  • Standard
    30 pages
    English language
    sale 15% off
ISO
ISO 3551-2:1992(Main)
Rotary core diamond drilling equipment - System A - Part 2: Inch units
SIST ISO 3551-2:2000

Establishes the nomenclature and lays down the leading dimensions to ensure interchangeability within the limits of system A of the following equipment: drill rods and couplings; casings, casing couplings, casing bits, casing shoes, drive shoes and casing ream shells; core barrels, core bits, core lifters and reaming shells. Specifies the characteristics of a range of equipment for drilling holes having diameters from 1.18 in to 7.88 in and yielding cores having diameters from 0.73 in to 6.5 in.

  • Standard
    79 pages
    English language
    sale 10% off
    e-Library read for
    1 day
  • Standard
    79 pages
    English language
    sale 15% off
  • Standard
    79 pages
    French language
    sale 15% off
  • Standard
    79 pages
    French language
    sale 15% off
ISO
ISO 3551-1:1992(Main)
Rotary core diamond drilling equipment - System A - Part 1: Metric units
SIST ISO 3551-1:1995

Establishes the nomenclature and lays down the leading dimensions to ensure interchangeability within the limits of system A of the following equipment: drill rods and couplings; casings, casing couplings, casing bits, casing shoes, drive shoes and casing ream shells; core barrels, core bits, core lifters and reaming shells. Specifies the characteristics of a range of equipment for drilling holes having diameters from 30 mm to 200 mm and yielding cores having diameters from 18,5 mm to 165 mm.

  • Standard
    83 pages
    English language
    sale 10% off
    e-Library read for
    1 day
  • Standard
    79 pages
    English language
    sale 15% off
  • Standard
    79 pages
    French language
    sale 15% off