ISO/TR 10064-2:1996/Cor 2:2006
(Corrigendum)Code of inspection practice — Part 2: Inspection related to radial composite deviations, runout, tooth thickness and backlash — Technical Corrigendum 2
Code of inspection practice — Part 2: Inspection related to radial composite deviations, runout, tooth thickness and backlash — Technical Corrigendum 2
Constitutes a code of practice dealing with inspection relevant to radial composite deviations, runout, tooth thickness and backlash of cylindrical involute gears; i.e. with measurements referred to double flank contact.
Code pratique de réception — Partie 2: Contrôle relatif aux écarts composés radiaux, au faux-rond, à l'épaisseur de dent et au jeu entre dents — Rectificatif technique 2
Valjasti zobniki – Smernice za meritve – 2. del: Meritve odstopkov pri radialnem preskušanju, odstopki krožnega teka, debeline zob in bočnega razstopa – Tehnični popravek 2
General Information
Relations
Standards Content (Sample)
SIST-TP ISO/TR 10064-2:1998/TC 2:2006SLOVENSKIdecember 2006
STANDARDValjasti zobniki – Smernice za meritve – 2. del: Meritve odstopkov pri radialnem preskušanju, odstopki krožnega teka, debeline zob in bočnega razstopa – Tehnični popravek 2Cylindrical gears - Code of inspection practice -
Part 2: Inspection related to radial composite
deviations, runout, tooth thickness and backlash - Technical Corrigendum 2©
Standard je založil in izdal Slovenski inštitut za standardizacijo. Razmnoževanje ali kopiranje celote ali delov tega dokumenta ni dovoljenoReferenčna številkaSIST-TP ISO/TR 10064-2:1998/TC 2:2006(en)ICS21.200
ICS
21.200 Ref. No. ISO/TR 10064-2:1996/Cor.2:2006(E)©
ISO 2006 – All rights reserved Printed in Switzerland
TECHNICAL REPORT ISO/TR 10064-2:1996 TECHNICAL CORRIGENDUM 2 Published 2006-08-01 INTERNATIONAL ORGANIZATION FOR STANDARDIZATION
•
•
OR
...
Questions, Comments and Discussion
Ask us and Technical Secretary will try to provide an answer. You can facilitate discussion about the standard in here.