ISO 21539:2019

INTERNATIONAL ISO
STANDARD 21539
First edition
2019-04
Ships and marine technology — Testing
specification for walkways using
electrical resistance trace heating
Reference number
©
ISO 2019
© ISO 2019
All rights reserved. Unless otherwise specified, or required in the context of its implementation, no part of this publication may
be reproduced or utilized otherwise in any form or by any means, electronic or mechanical, including photocopying, or posting
on the internet or an intranet, without prior written permission. Permission can be requested from either ISO at the address
below or ISO’s member body in the country of the requester.
ISO copyright office
CP 401 • Ch. de Blandonnet 8
CH-1214 Vernier, Geneva
Phone: +41 22 749 01 11
Fax: +41 22 749 09 47
Email: copyright@iso.org
Website: www.iso.org
Published in Switzerland
ii © ISO 2019 – All rights reserved

Contents Page
Foreword .iv
1 Scope . 1
2 Normative references . 1
3 Terms and definitions . 1
4 Design requirements . 2
5 Test method . 2
5.1 Test purpose . 2
5.2 Test facility requirements . 2
5.3 Test conditions . 2
5.3.1 General. 2
5.3.2 Test temperature . 2
5.3.3 Test wind . 3
5.4 Test specimen requirements . 3
5.4.1 General requirement . 3
5.4.2 Dimension . 3
5.4.3 Installation . 3
5.5 Test procedures . 4
5.5.1 General. 4
5.5.2 Test procedure — Option 1. 4
5.5.3 Test procedure — Option 2. 5
5.6 Pass/fail criteria . 6
6 Test report . 7
Bibliography . 8
Foreword
ISO (the International Organization for Standardization) is a worldwide federation of national standards
bodies (ISO member bodies). The work of preparing International Standards is normally carried out
through ISO technical committees. Each member body interested in a subject for which a technical
committee has been established has the right to be represented on that committee. International
organizations, governmental and non-governmental, in liaison with ISO, also take part in the work.
ISO collaborates closely with the International Electrotechnical Commission (IEC) on all matters of
electrotechnical standardization.
The procedures used to develop this document and those intended for its further maintenance are
described in the ISO/IEC Directives, Part 1. In particular the different approval criteria needed for the
different types of ISO documents should be noted. This document was drafted in accordance with the
editorial rules of the ISO/IEC Directives, Part 2. www .iso .org/directives.
Attention is drawn to the possibility that some of the elements of this document may be the subject of
patent rights. ISO shall not be held responsible for identifying any or all such patent rights. Details of
any patent rights identified during the development of the document will be in the Introduction and/or
on the ISO list of patent declarations received. www .iso .org/patents.
Any trade name used in this document is information given for the convenience of users and does not
constitute an endorsement.
For an explanation of the voluntary nature of standards, the meaning of ISO specific terms and
expressions related to conformity assessment, as well as information about ISO's adherence to the
World Trade Organization (WTO) principles in the Technical Barriers to Trade (TBT), see www .iso
.org/iso/foreword .html.
This document was prepared by Technical Committee ISO/TC 8, Ships and marine technology,
Subcommittee SC 4, Outfitting and deck machinery.
Any feedback or questions on this document should be directed to the user’s national standards body. A
complete listing of these bodies can be found at www .iso .org/members .html.
iv © ISO 2019 – All rights reserved

INTERNATIONAL STANDARD ISO 21539:2019(E)
Ships and marine technology — Testing specification for
walkways using electrical resistance trace heating
1 Scope
This document specifies a test method to assess the performance of walkways using electrical resistance
trace heating to provide anti-icing in low temperature environments, when installed for exterior
applications. It includes requirements for the test facility, the test conditions, the test specimens, the
test procedures and the test report.
2 Normative references
The following documents are referred to in the text in such a way that some or all of their content
constitutes requirements of this document. For dated references, only the edition cited applies. For
undated references, the latest edition of the referenced document (including any amendments) applies.
IEC/IEEE 60079-30-1, Explosive atmospheres — Part 30-1: Electrical resistance trace heating — General
and testing requirements
IEC/IEEE 60079-30-2, Explosive atmospheres — Part 30-2: Application guide for design, installation and
maintenance
3 Terms and definitions
For the purposes of this document, the following terms and definitions apply.
ISO and IEC maintain terminological databases for use in standardization at the following addresses:
— ISO Online browsing platform: available at https: //www .iso .org/obp
— IEC Electropedia: available at http: //www .electropedia .org/
3.1
heated walkway
heated passage on the deck of ships sailing in low-temperature regions enabling pedestrians to pass
more safely by adding heat through a thermal fluid
Note 1 to entry: The thermal fluid can be heated oil, steam or water.
3.2
anti-icing
prevention of ice formation on protected surfaces
3.3
ambient temperature
temperature of the air in the test chamber
3.4
flush-mounted
walkway installation where the air flow is highly restricted or prevented
3.5
raised
walkway installation that is elevated, which allows an air flow directly below the walkway
4 Design requirements
Walkways should be designed and constructed using materials that withstand the foreseeable
conditions of use. In particular, at least the following details shall be considered:
a) dimensioning and selection of components (including fixings, connections, supports and
foundations) shall ensure sufficient rigidity and stability;
b) all parts shall be resistant to envir
...