ISO 3209:1989
(Main)Aerospace — Nuts, anchor, self-locking, floating, two-lug, with counterbore, with MJ threads, coated or uncoated, classification 1 100 MPa/235 degrees C, 1 100 MPa/315 degrees C or 1 100 MPa/425 degrees C — Dimensions
Aerospace — Nuts, anchor, self-locking, floating, two-lug, with counterbore, with MJ threads, coated or uncoated, classification 1 100 MPa/235 degrees C, 1 100 MPa/315 degrees C or 1 100 MPa/425 degrees C — Dimensions
Aéronautique et espace — Écrous à river, à freinage interne, à filetage MJ, flottants, double patte, avec chambrage, revêtus ou non revêtus, de classification 1 100 MPa/235 degrés C, 1 100 MPa/315 degrés C ou 1 100 MPa/425 degrés C — Dimensions
General Information
- Status
- Withdrawn
- Publication Date
- 04-Oct-1989
- Withdrawal Date
- 04-Oct-1989
- Technical Committee
- ISO/TC 20/SC 4 - Aerospace fastener systems
- Drafting Committee
- ISO/TC 20/SC 4 - Aerospace fastener systems
- Current Stage
- 9599 - Withdrawal of International Standard
- Start Date
- 26-Nov-1998
- Completion Date
- 12-Feb-2026
Relations
- Consolidated By
ISO 8674:1999 - Hexagon nuts, style 2, with metric fine pitch thread — Product grades A and B - Effective Date
- 06-Jun-2022
- Effective Date
- 15-Apr-2008
ISO 3209:1989 - Aerospace -- Nuts, anchor, self-locking, floating, two-lug, with counterbore, with MJ threads, coated or uncoated, classification 1 100 MPa/235 degrees C, 1 100 MPa/315 degrees C or 1 100 MPa/425 degrees C -- Dimensions
ISO 3209:1989 - Aerospace — Nuts, anchor, self-locking, floating, two-lug, with counterbore, with MJ threads, coated or uncoated, classification 1 100 MPa/235 degrees C, 1 100 MPa/315 degrees C or 1 100 MPa/425 degrees C — Dimensions Released:10/5/1989
Get Certified
Connect with accredited certification bodies for this standard
DEKRA North America
DEKRA certification services in North America.
Eagle Registrations Inc.
American certification body for aerospace and defense.
Element Materials Technology
Materials testing and product certification.
Sponsored listings
Frequently Asked Questions
ISO 3209:1989 is a standard published by the International Organization for Standardization (ISO). Its full title is "Aerospace — Nuts, anchor, self-locking, floating, two-lug, with counterbore, with MJ threads, coated or uncoated, classification 1 100 MPa/235 degrees C, 1 100 MPa/315 degrees C or 1 100 MPa/425 degrees C — Dimensions". This standard covers: Aerospace — Nuts, anchor, self-locking, floating, two-lug, with counterbore, with MJ threads, coated or uncoated, classification 1 100 MPa/235 degrees C, 1 100 MPa/315 degrees C or 1 100 MPa/425 degrees C — Dimensions
Aerospace — Nuts, anchor, self-locking, floating, two-lug, with counterbore, with MJ threads, coated or uncoated, classification 1 100 MPa/235 degrees C, 1 100 MPa/315 degrees C or 1 100 MPa/425 degrees C — Dimensions
ISO 3209:1989 is classified under the following ICS (International Classification for Standards) categories: 49.030.30 - Nuts. The ICS classification helps identify the subject area and facilitates finding related standards.
ISO 3209:1989 has the following relationships with other standards: It is inter standard links to ISO 8674:1999, ISO 3209:1998. Understanding these relationships helps ensure you are using the most current and applicable version of the standard.
ISO 3209:1989 is available in PDF format for immediate download after purchase. The document can be added to your cart and obtained through the secure checkout process. Digital delivery ensures instant access to the complete standard document.
Standards Content (Sample)
IS0
I NTER NAT1 O NAL
STANDARD
First edition
1989-1 0-1 5
Aerospace - Nuts, anchor, self-locking,
floating, two-lug, with counterbore, with MJ
threads, coated or uncoated, classification
1 100 MPa/235 OC, 1 100 MPa/315 OC or
1 I00 MPa/425 OC - Dimensions
Aéronautique et espace - Écrous à river, à freinage interne, à filetage MJ, flot-
tants, double patte, avec chambrage, revêtus ou non revêtus, de classification
1 100 MPal235 OC, 1 100 MPal315 OC ou 1 100 Mpal425 OC - Dimensions
Reference number
IS0 3209 : 1989 (E)
IS0 3209 : 1989 (E)
~ Foreword
IS0 (the International Organization for Standardization) is a worldwide federation of
national standards bodies (IS0 member bodies). The work of preparing International
I
Standards is normally carried out through IS0 technical committees. Each member
body interested in a subject for which a technical committee has beer) established has
the right to be represented on that committee. International organizations, govern-
mental and non-governmental, in liaison with ISO, also take part in the work. IS0
collaborates closely with the International Electrotechnical Commission (IEC) on all
matters of electrotechnical standardization.
Draft International Standards adopted by the technical committees are circulated to
the member bodies for approval before their acceptance as International Standards by
the IS0 Council. They are approved in accordance with IS0 procedures requiring at
least 75 % approval by the member bodies voting.
International Standard IS0 3209 was prepared by Technical Committee ISO/TC 20,
Aircraft and space vehicles.
O IS0 1989
All rights reserved. No part of this publication may be reproduced or utilized in any form or by any
means, electronic or mechanical, including photocopying and microfilm, without permission in
writing from the publisher.
International Organization for Standardization
Case postale 56 O CH-121 1 Genève 20 Switzerland
Printed in Switzerland
ii
IS0 3209 : 1989 (E)
Introduction
The dimensions laid down in this International Standard have been specified so as to
satisfy the requirements laid down in IS0 5858 : - 11, Aerospace - Self-locking nuts
with maximum operating temperature less than or equal to 425 OC - Procurement
specification.
1) To be published.
iii
INTERNATIONAL STANDARD IS0 3209 : 1989 (E)
~~ ~ ~
Aerospace - Nuts, anchor, self-locking, floating, two-lug,
with counterbore, with MJ threads, coated or uncoated,
classification 1 I00 MPa/235 OC, I 100 MPa/315 OC or
I 100 MPa/425 OC - Dimensions
1 Scope 2 Normative references
The following standards contain provisions which, through
...
NORME IS0
I N TE R NAT I O NA LE 3209
Première édition
1989- 10-1 5
Aéronautique et espace - Écrous à river, à
freinage interne, à filetage MJ, flottants, double
patte, avec chambrage, revêtus ou non revêtus,
de classification 1 100 MPa/235 OC,
1 100 MPa/315 OC ou 1 100 MPa/425 OC -
Dimensions
Aerospace - Nuts, anchor, self-locking, floating, two-lug, with counterbore, with
MJ threads, coated or uncoated, classification 1 100 MPaf235 OC,
1 100 MPal315 OC or 1 100 MPaf425 OC - Dimensions
Numéro de référence
IS0 3209 : 1989 (FI
IS0 3209 : 1989 (FI
l
Avant-propos
L'ISO (Organisation internationale de normalisation) est une fédération mondiale
d'organismes nationaux de normalisation (comités membres de I'ISO). L'élaboration
des Normes internationales est en général confiée aux comités techniques de I'ISO.
Chaque comité membre intéressé par une étude a le droit de faire partie du comité
technique créé à cet effet. Les organisations internationales, gouvernementales et non
gouvernementales, en liaison avec I'ISO participent également aux travaux. L'ISO col-
labore étroitement avec la Commission électrotechnique internationale (CEI) en ce qui
concerne la normalisation électrotechnique.
Les projets de Normes internationales adoptés par les comités techniques sont soumis
aux comités membres pour approbation, avant leur acceptation comme Normes inter-
nationales par le Conseil de I'ISO. Les Normes internationales sont approuvées confor-
mément aux procédures de I'ISO qui requièrent l'approbation de 75 % au moins des
comités membres votants.
La Norme internationale IS0 3209 a été élaborée par le comité technique ISO/TC 20,
Aéronautique et espace.
O IS0 1989
Droits de reproduction réservés. Aucune partie de cette publication ne peut être reproduite ni
utilisée sous quelque forme que ce soit et par aucun procédé, électronique ou mécanique,
y compris la photocopie et les microfilms, sans l'accord écrit de l'éditeur.
Organisation internationale de normalisation
Case postale 56 0 CH-121 1 Genève 20 0 Suisse
Imprimé en Suisse
ii
IS0 3209 : 1989 (FI
Introduction
Les dimensions prescrites par la présente Norme internationale ont été définies pour
satisfaire aux exigences de I'ISO 5858 : - I), Aéronautique et espace - Écrous & frei-
nage interne dont la température maximale d'utilisation est inférieure ou égale
à 425 OC - Spécification d'approvisionnement.
1) À publier.
IS0 3209 : 1989 (FI
NORME INTERNATIONALE
Aéronautique et espace - Écrous à river, à freinage
interne, à filetage MJ, flottants, double patte, avec
chambrage, revêtus ou non revêtus, de classification
1 100 MPa/235 OC, I 100 MPa/315 OC ou
I 100 MPa/425 OC - Dimensions
2 Références normatives
1 Domaine d’application
Les normes suivantes contiennent des dispositions qui, par
La présente Norme internationale prescrit les dimensions des
suite de la référence qui en est faite, constituent des disposi-
écrous à river, à
...
Questions, Comments and Discussion
Ask us and Technical Secretary will try to provide an answer. You can facilitate discussion about the standard in here.
Loading comments...