ISO 5599-2:2001/Cor 1:2007
(Corrigendum)Pneumatic fluid power — Five-port directional control valves — Part 2: Mounting interface surfaces with optional electrical connector — Technical Corrigendum 1
Pneumatic fluid power — Five-port directional control valves — Part 2: Mounting interface surfaces with optional electrical connector — Technical Corrigendum 1
This part of ISO 5599 specifies the requirements for a mounting interface surface with optional electrical connector for five-port pneumatic directional control valves, for use at a maximum rated pressure of [ 1)]. It gives
— dimensions and tolerances of the interface features,
— port identification,
— identification of the result of control-mechanism actuation, and
— dimensions, tolerances and specifications for optional interface electrical connector mating.
It is not applicable to the functional characteristics of interfaces.
Transmissions pneumatiques — Distributeurs à cinq orifices principaux — Partie 2: Plans de pose avec connecteur électrique facultatif — Rectificatif technique 1
Fluidna tehnika - Pnevmatika - Petpotni ventili - 2. del: Priključne površine z električnimi priključki - Popravek
Ta del standarda ISO 5599 določa zahteve za priključno površino z električnim priključkom za petpotne pnevmatske ventile za uporabo pri največjem nazivnem tlaku [ 1)]. Vsebuje
– dimenzije in odstopanja za lastnosti vmesnika,
– opredelitev vhodov,
– opredelitev rezultata proženja nadzornega mehanizma ter
– dimenzije, odstopanja in specifikacije za stikanje električnega priključka.
Ne uporablja se za funkcijske značilnosti vmesnikov.
General Information
- Status
- Published
- Publication Date
- 16-Jan-2007
- Technical Committee
- ISO/TC 131/SC 5 - Control products and components
- Drafting Committee
- ISO/TC 131/SC 5/WG 3 - Pneumatic control products
- Current Stage
- 6060 - International Standard published
- Start Date
- 17-Jan-2007
- Completion Date
- 12-Feb-2026
Relations
- Effective Date
- 06-Jun-2022
- Effective Date
- 12-May-2008
- Effective Date
- 15-Apr-2008
Get Certified
Connect with accredited certification bodies for this standard
Institut za varilstvo d.o.o. (Welding Institute)
Slovenia's leading welding institute since 1952. ISO 3834, EN 1090, pressure equipment certification, NDT personnel, welder qualification. Only IIW Au
Sponsored listings
Frequently Asked Questions
ISO 5599-2:2001/Cor 1:2007 is a corrigendum published by the International Organization for Standardization (ISO). Its full title is "Pneumatic fluid power — Five-port directional control valves — Part 2: Mounting interface surfaces with optional electrical connector — Technical Corrigendum 1". This standard covers: This part of ISO 5599 specifies the requirements for a mounting interface surface with optional electrical connector for five-port pneumatic directional control valves, for use at a maximum rated pressure of [ 1)]. It gives — dimensions and tolerances of the interface features, — port identification, — identification of the result of control-mechanism actuation, and — dimensions, tolerances and specifications for optional interface electrical connector mating. It is not applicable to the functional characteristics of interfaces.
This part of ISO 5599 specifies the requirements for a mounting interface surface with optional electrical connector for five-port pneumatic directional control valves, for use at a maximum rated pressure of [ 1)]. It gives — dimensions and tolerances of the interface features, — port identification, — identification of the result of control-mechanism actuation, and — dimensions, tolerances and specifications for optional interface electrical connector mating. It is not applicable to the functional characteristics of interfaces.
ISO 5599-2:2001/Cor 1:2007 is classified under the following ICS (International Classification for Standards) categories: 23.100.50 - Control components. The ICS classification helps identify the subject area and facilitates finding related standards.
ISO 5599-2:2001/Cor 1:2007 has the following relationships with other standards: It is inter standard links to ISO 5599-2:2001; is excused to SIST ISO 5599-2:2002, ISO 5599-2:2001. Understanding these relationships helps ensure you are using the most current and applicable version of the standard.
ISO 5599-2:2001/Cor 1:2007 is available in PDF format for immediate download after purchase. The document can be added to your cart and obtained through the secure checkout process. Digital delivery ensures instant access to the complete standard document.
Standards Content (Sample)
2003-01.Slovenski inštitut za standardizacijo. Razmnoževanje celote ali delov tega standarda ni dovoljeno.Transmissions pneumatiques - Distributeurs à cinq orifices principaux - Partie 2: Plans de pose avec connecteur électrique facultatifPneumatic fluid power - Five-port directional control valves - Part 2: Mounting interface surfaces with optional electrical connector23.100.50Krmilni sestavni deliControl componentsICS:Ta slovenski standard je istoveten z:ISO 5599-2:2001/Cor 1:2007SIST ISO 5599-2:2002/Cor 1:2014en,fr01-januar-2014SIST ISO 5599-2:2002/Cor 1:2014SLOVENSKI
STANDARD
ICS
23.100.50 Ref. No. ISO 5599-2:2001/Cor.1:2007(E)©
ISO 2007 – All rights reserved Published in Switzerland
INTERNATIONAL STANDARD ISO 5599-2:2001 TECHNICAL CORRIGENDUM 1 Published 2007-02-01 INTERNATIONAL ORGANIZATION FOR STANDARDIZATION •
• ORGANISATION INTERNATIONALE DE NORMALISATION
Pneumatic fluid p
...
Questions, Comments and Discussion
Ask us and Technical Secretary will try to provide an answer. You can facilitate discussion about the standard in here.
Loading comments...