iTeh StandardsiTeh Standards
EURUSD
Your shopping cart is empty.
ISO

ISO 2922:2000/Amd 1:2013

(Amendment)

Acoustics — Measurement of airborne sound emitted by vessels on inland waterways and harbours — Amendment 1

Acoustics — Measurement of airborne sound emitted by vessels on inland waterways and harbours — Amendment 1

Acoustique — Mesurage du bruit aérien émis par les bateaux de navigation intérieure et portuaire — Amendement 1

General Information

Status
Withdrawn
Publication Date
15-Jul-2013
ICS
17.140.30 - Noise emitted by means of transport
Technical Committee
ISO/TC 43/SC 1 - Noise
Drafting Committee
ISO/TC 43/SC 1 - Noise
Parallel Committee
ISO/TC 127/SC 2 - Safety, ergonomics and general requirements
Current Stage
9599 - Withdrawal of International Standard
Completion Date
08-Dec-2020
Ref Project

Relations

Revised
ISO 2922:2020 - Acoustics — Measurement of airborne sound emitted by vessels on inland waterways and harbours
Effective Date
24-Jun-2017
Consolidates
ISO 23718:2007 - Metallic materials — Mechanical testing — Vocabulary
Effective Date
06-Jun-2022
Amends
ISO 2922:2000 - Acoustics — Measurement of airborne sound emitted by vessels on inland waterways and harbours
Effective Date
04-Sep-2021

Buy Standard

ISO 2922:2000/Amd 1:2013ISO 2922:2000/Amd 1:2013
PreviousNext
Standard
ISO 2922:2000/Amd 1:2013
English language
1 pages
sale 15% off
Preview
sale 15% off
Preview
ISO 2922:2000/Amd 1:2013ISO 2922:2000/Amd 1:2013
PreviousNext
Standard
ISO 2922:2000/Amd 1:2013
French language
1 pages
sale 15% off
Preview
sale 15% off
Preview

Standards Content (Sample)

INTERNATIONAL ISO
STANDARD 2922
Second edition
2000-11-01
AMENDMENT 1
2013-07-15
Acoustics — Measurement of airborne
sound emitted by vessels on inland
waterways and harbours
AMENDMENT 1
Acoustique — Mesurage du bruit aérien émis par les bateaux de
navigation intérieure et portuaire
AMENDEMENT 1
Reference number
ISO 2922:2000/Amd.1:2013(E)
©
ISO 2013

---------------------- Page: 1 ----------------------
ISO 2922:2000/Amd.1:2013(E)

COPYRIGHT PROTECTED DOCUMENT
© ISO 2013
All rights reserved. Unless otherwise specified, no part of this publication may be reproduced or utilized otherwise in any form
or by any means, electronic or mechanical, including photocopying, or posting on the internet or an intranet, without prior
written permission. Permission can be requested from either ISO at the address below or ISO’s member body in the country of
the requester.
ISO copyright office
Case postale 56 • CH-1211 Geneva 20
Tel. + 41 22 749 01 11
Fax + 41 22 749 09 47
E-mail copyright@iso.org
Web www.iso.org
Published in Switzerland
ii © ISO 2013 – All rights reserved

---------------------- Page: 2 ----------------------
ISO 2922:2000/Amd.1:2013(E)

Foreword
ISO (the International Organization for Standardization) is a worldwide federation of national standards
bodies (ISO member bodies). The work of preparing International Standards is normally carried out
through ISO technical committees. Each member body interested in a subject for which a technical
committee has been established has the right to be represented on that committee. International
organizations, governmental and non-governmental, in liaison with ISO, also take part in the work.
ISO collaborates closely with the International Electrotechnical Commission (IEC) on all matters of
electrotechnical standardization.
The procedures used to develop this doc
...

NORME ISO
INTERNATIONALE 2922
Deuxième édition
2000-11-01
AMENDEMENT 1
2013-07-15
Acoustique — Mesurage du bruit
aérien émis par les bateaux de
navigation intérieure et portuaire —
AMENDEMENT 1
Acoustics — Measurement of airborne sound emitted by vessels on
inland waterways and harbours —
AMENDMENT 1
Numéro de référence
ISO 2922:2000/Amd.1:2013(F)
©
ISO 2013

---------------------- Page: 1 ----------------------
ISO 2922:2000/Amd.1:2013(F)

DOCUMENT PROTÉGÉ PAR COPYRIGHT
© ISO 2013
Droits de reproduction réservés. Sauf indication contraire, aucune partie de cette publication ne peut être reproduite ni utilisée
sous quelque forme que ce soit et par aucun procédé, électronique ou mécanique, y compris la photocopie, l’affichage sur
l’internet ou sur un Intranet, sans autorisation écrite préalable. Les demandes d’autorisation peuvent être adressées à l’ISO à
l’adresse ci-après ou au comité membre de l’ISO dans le pays du demandeur.
ISO copyright office
Case postale 56 • CH-1211 Geneva 20
Tel. + 41 22 749 01 11
Fax + 41 22 749 09 47
E-mail copyright@iso.org
Web www.iso.org
Publié en Suisse
ii © ISO 2013 – Tous droits réservés

---------------------- Page: 2 ----------------------
ISO 2922:2000/Amd.1:2013(F)

Avant-propos
L’ISO (Organisation internationale de normalisation) est une fédération mondiale d’organismes
nationaux de normalisation (comités membres de l’ISO). L’élaboration des Normes internationales est
en général confiée aux comités techniques de l’ISO. Chaque comité membre intéressé par une étude
a le droit de faire partie du comité technique créé à cet effet. Les organisations internationales,
gouvernementales et non gouvernementales, en liaison avec l’ISO participent également aux travaux.
L’ISO collabore étroitement avec la Commission électrotechnique internationale (CEI) en ce qui concerne
la normalisation électrotechnique.
Les procédures utilisées pour élaborer le présent document et celles destinées à sa mise à jour sont
décrites dans les Directives ISO/CEI, Partie 1. Il convient, en particulier de prendre note des diffé
...

Questions, Comments and Discussion

Ask us and Technical Secretary will try to provide an answer. You can facilitate discussion about the standard in here.

This May Also Interest You

ISO
ISO 11819-1:2023(Main)
Acoustics — Measurement of the influence of road surfaces on traffic noise — Part 1: Statistical pass-by method

This document specifies a method of comparing traffic noise on different road surfaces for various compositions of road traffic for the purpose of evaluating different road surface types. Sound levels representing either light or heavy vehicles at selected speeds are assigned to a certain road surface. The method is applicable to traffic travelling at constant speed, i.e. free-flowing conditions at posted speeds of 50 km/h and upwards. For conditions where traffic is not free flowing, such as at junctions and where the traffic is congested, the method is not applicable. A standard method for comparing the noise characteristics of road surfaces gives road and environment authorities a tool for establishing common practices or limits regarding the use of road surfaces meeting certain noise criteria. However, it is not within the scope of ISO 11819 (all parts) to suggest such criteria. The statistical pass-by (SPB) method is suitable for use for the following main purposes: — to classify road surfaces according to their influence on traffic noise (surface classification); — to assist in verifying conformity of production of road surfaces; — to evaluate acoustic performance of road surfaces throughout operation relative to new condition; — to evaluate the influence of different road surfaces on traffic noise at sites irrespective of condition and service time; — to evaluate acoustic performance of a road surface relative to a reference surface. Due to practical restrictions, the method cannot be applied at all possible locations. However, the backing board method can allow some locations to be tested that were not previously acceptable. Clause 5 gives a general description of the SPB method.

  • Standard
    48 pages
    English language
    sale 15% off
  • Standard
    50 pages
    French language
    sale 15% off
ISO
ISO 362-1:2022(Main)
Acoustics — Engineering method for measurement of noise emitted by accelerating road vehicles — Part 1: M and N categories

This document specifies an engineering method for measuring the noise emitted by road vehicles of categories M and N under typical urban traffic conditions. It excludes vehicles of category L1 and L2, which are covered by ISO 9645, and vehicles of category L3, L4, and L5, which are covered by ISO 362‑2. The specifications are intended to reproduce the level of noise generated by the principal noise sources during normal driving in urban traffic (see Annex A). The method is designed to meet the requirements of simplicity as far as they are consistent with reproducibility of results under the operating conditions of the vehicle. The test method requires an acoustical environment that is obtained only in an extensive open space. Such conditions are usually provided for — type approval measurements of a vehicle, — measurements at the manufacturing stage, and — measurements at official testing stations. NOTE 1 The results obtained by this method give an objective measure of the noise emitted under the specified conditions of test. It is necessary to consider the fact that the subjective appraisal of the noise annoyance of different classes of motor vehicles is not simply related to the indications of a sound measurement system. As annoyance is strongly related to personal human perception, physiological human conditions, culture, and environmental conditions, there is a large variation and it is, therefore, not useful as a parameter to describe a specific vehicle condition. NOTE 2 Spot checks of vehicles chosen at random are rarely made in an ideal acoustical environment. If measurements are carried out on the road in an acoustical environment that does not fulfil the requirements stated in this document, the results obtained can deviate appreciably from the results obtained using the specified conditions.

  • Standard
    75 pages
    English language
    sale 15% off
ISO
ISO 362-3:2022(Main)
Acoustics — Measurement of noise emitted by accelerating road vehicles — Engineering method — Part 3: Indoor testing M and N categories

This document specifies an engineering method for measuring the noise emitted by road vehicles of categories M and N by using a semi anechoic chamber with a dynamometer installed. The specifications are intended to achieve an acoustical correlation between testing the exterior noise of road vehicles in a semi anechoic chamber and outdoor testing as described in ISO 362-1. This document provides all necessary specifications and procedures for indoor testing to obtain results which are comparable to typical run-to-run variations of measurements in today’s type approval tests. This document provides a method designed to meet the requirements of simplicity as far as they are consistent with the reproducibility of results under the operating conditions of the vehicle. NOTE 1 The results obtained by this method give an objective measure of the noise emitted under the specified conditions of test. It is necessary to consider the fact that the subjective appraisal of the noise annoyance of different classes of motor vehicles is not simply related to the indications of a sound measuring system. As annoyance is strongly related to personal human perception, physiological human conditions, culture, and environmental conditions, there is a large variation and annoyance is therefore not useful as a parameter to describe a specific vehicle condition. NOTE 2 If measurements are carried out in rooms which do not fulfil the requirements stated in this document, the results obtained can deviate from the results using the specified conditions.

  • Standard
    66 pages
    English language
    sale 15% off
ISO
ISO/TS 13471-2:2022(Main)
Acoustics — Temperature influence on tyre/road noise measurement — Part 2: Correction for temperature when testing with the pass-by methods

This document specifies correction procedures for the effect of temperature on vehicle noise emission, as influenced by the tyre/road noise contribution. Temperatures considered are road and ambient air temperatures. The noise emission for which this document is applicable is measured by means of ISO 11819-1, or similar methods such as the American methods SIP and CTIM specified in References [3][4]. It is also applicable to other pass-by measurements conducted without acceleration, such as when testing tyres and vehicles on test tracks with ISO 10844[1] reference surfaces; however, given that tyre/road noise is dominant. Measurement results obtained at a certain temperature, which may vary over a wide range, are normalized to a designated reference temperature (20 °C) using a correction procedure specified in this document.

  • Technical specification
    18 pages
    English language
    sale 15% off
ISO
ISO 13472-1:2022(Main)
Acoustics — Measurement of sound absorption properties of road surfaces in situ — Part 1: Extended surface method

This document describes a test method for measuring in situ the sound absorption coefficient of road surfaces as a function of frequency in the range from 250 Hz to 4 kHz. Normal incidence is assumed. However, the test method can be applied at oblique incidence although with some limitations (see Annex F). The test method is intended for the following applications: — determination of the sound absorption properties of road surfaces in actual use; — comparison of sound absorption design specifications of road surfaces with actual performance data of the surface after completion of the construction work. The complex reflection factor can also be determined by this method.

  • Standard
    29 pages
    English language
    sale 15% off
  • Standard
    31 pages
    French language
    sale 15% off
  • Draft
    29 pages
    English language
    sale 15% off
  • Draft
    35 pages
    French language
    sale 15% off
ISO
ISO 10844:2021(Main)
Acoustics — Specification of test tracks for measuring sound emitted by road vehicles and their tyres

This document specifies the essential characteristics of a test track surface intended to be used for measuring rolling sound emission of vehicles and their tyres. The surface design given in this document — produces consistent levels of tyre or road sound emission under a wide range of operating conditions including those appropriate to vehicle sound testing, — minimizes inter-site variation, — limits absorption of the vehicle sound sources, and — is consistent with road-building practice.

  • Standard
    24 pages
    English language
    sale 15% off
  • Draft
    24 pages
    English language
    sale 15% off
ISO
ISO 3381:2021(Main)
Railway applications — Acoustics — Noise measurement inside railbound vehicles

This document specifies the measurement method and conditions to obtain reproducible noise levels on-board all kinds of vehicles operating on rails or other types of fixed track, hereinafter conventionally called “unit”, except for track maintenance vehicles in working modes. This document is applicable to type testing. It does not include all the instructions to carry out monitoring testing or evaluation of noise exposure of passengers or drivers over a whole journey. This document is not applicable to guided buses. It provides measurement procedures for vehicle interior noise (in general, a vehicle type test is carried out using only a selected subset of these tests): — when the vehicle is moving at constant speed; — when the vehicle is stationary; — when the vehicle is accelerating or decelerating; — in the driver's cab when an external warning horn is sounding (specifically required for European Union regulation application) It does not provide measurement procedures for: — audibility or intelligibility of any audible signals; — assessment of warning devices other than warning horns. The assessment of noise exposure of train crew due to operational conditions is not in the scope of this document. The results can be used, for example: — to characterise the noise inside these units; — to compare the internal noise of various units on a particular track section; — to collect basic source data for units. The test procedures specified in this document are of engineering grade (grade 2), the preferred grade for noise declaration purposes as defined in ISO 12001. If test conditions are relaxed, for example as they are for monitoring of in-service trains, then the results are no longer of engineering grade. The procedures specified for accelerating and decelerating tests are of survey grade (grade 3).

  • Standard
    41 pages
    English language
    sale 15% off
  • Standard
    45 pages
    French language
    sale 15% off
  • Draft
    41 pages
    English language
    sale 15% off
  • Draft
    47 pages
    French language
    sale 15% off
ISO
ISO/TS 11819-3:2021(Main)
Acoustics — Measurement of the influence of road surfaces on traffic noise — Part 3: Reference tyres

This document specifies two tyres intended to serve as reference tyres when using the close-proximity (CPX) method specified in ISO 11819-2. The CPX method is a method for evaluating different road surfaces with respect to their influence on traffic noise, under conditions when tyre/road noise dominates. This method ideally requires the use of standardized tyres, which have noise characteristics that are broadly representative of the effect of road surfaces on the noise emission of passenger car and heavy vehicle tyres. However, such tyres are not specified in ISO 11819-2. This document serves to specify these standardized tyres.

  • Technical specification
    18 pages
    English language
    sale 15% off
  • Technical specification
    20 pages
    French language
    sale 15% off
  • Draft
    18 pages
    English language
    sale 15% off
ISO
ISO 2922:2020(Main)
Acoustics — Measurement of airborne sound emitted by vessels on inland waterways and harbours

This document specifies the conditions for obtaining reproducible and comparable measurement results of the airborne sound emitted by vessels of all kinds, on inland waterways and in ports and harbours, except powered recreational craft as specified in the ISO 14509 series. This document is applicable to sea-going vessels, harbour vessels, dredgers, and all watercraft, including non-displacement craft, used or capable of being used as a means of transport on water. There are no limitations to the application of this document with regard to speed, length and height of vessels, as long as the ship is determined to act like a point source at the reference distance of 25 m. All noise data obtained in accordance with this document are referred to a reference distance of 25 m.

  • Standard
    12 pages
    English language
    sale 15% off
  • Standard
    13 pages
    French language
    sale 15% off
  • Draft
    12 pages
    English language
    sale 15% off
  • Draft
    13 pages
    French language
    sale 15% off
ISO
ISO 5130:2019(Main)
Acoustics — Measurements of sound pressure level emitted by stationary road vehicles

This document specifies a test procedure, environment and instrumentation for measuring the exterior sound pressure levels from road vehicles under stationary conditions, providing a continuous measure of the sound pressure level over a range of engine speeds. This document applies only to road vehicles of categories L, M, and N equipped with internal combustion engines. Vehicles where an internal combustion engine cannot operate when the vehicle is at stationary conditions are outside the scope of this document. The method is designed to meet the requirements of simplicity as far as they are consistent with reproducibility of results under the operating conditions of the vehicle. It is within the scope of this document to measure the stationary A-weighted sound pressure level during — type approval measurements of vehicle; — measurements at the manufacturing stage; — measurements at official testing stations; — measurements at roadside testing. This document specifices a test method to determine a reference sound level which is unique for the vehicle and therefore not suitable to compare against a general limit, as test condition, microphone condition location relative to the sound sources can vary significantly. The test conditions in proximity and at engine speeds significantly higher compared to real operation conditions in traffic are deliberately chosen to enable in-use tests at higher background conditions, which are typical for road-side checks. Technical background information is given in Annex A.

  • Standard
    18 pages
    English language
    sale 15% off
  • Standard
    18 pages
    French language
    sale 15% off