ISO 11855-4:2021/Amd 1:2023
(Amendment)Building environment design — Embedded radiant heating and cooling systems — Part 4: Dimensioning and calculation of the dynamic heating and cooling capacity of Thermo Active Building Systems (TABS) — Amendment 1
General Information
- Abstract
- Status
- Published
- Publication Date
- 16-Oct-2023
- Technical Committee
- ISO/TC 205 - Building environment design
- Drafting Committee
- ISO/TC 205 - Building environment design
- Current Stage
- 6060 - International Standard published
- Start Date
- 17-Oct-2023
- Due Date
- 22-Sep-2023
- Completion Date
- 17-Oct-2023
Buy Documents
ISO 11855-4:2021/Amd 1:2023 - Building environment design — Embedded radiant heating and cooling systems — Part 4: Dimensioning and calculation of the dynamic heating and cooling capacity of Thermo Active Building Systems (TABS) — Amendment 1 Released:10/17/2023
ISO 11855-4:2021/Amd 1:2023 - Conception de l'environnement des bâtiments — Systèmes intégrés de chauffage et de refroidissement par rayonnement — Partie 4: Dimensionnement et calculs relatifs au chauffage adiabatique et à la puissance frigorifique pour systèmes d'éléments de construction thermoactifs (TABS) — Amendement 1/1/2023
Overview
ISO 11855-4:2021/Amd 1:2023 is an international standard published by ISO that focuses on the dimensioning and calculation of dynamic heating and cooling capacity for Thermo Active Building Systems (TABS). As a key part of the ISO 11855 series, this amendment updates the methodology for designing embedded radiant heating and cooling systems, specifically Type V TABS. These systems integrate heating and cooling elements directly into building structures to achieve enhanced thermal comfort and energy efficiency.
This amendment emphasizes dynamic calculation methods that consider variable heat gains such as solar, internal gains, and ventilation loads, allowing for accurate sizing of cooling systems - including chillers and hydraulic fluid circuits. The standard supports sustainable building environment design by promoting the use of renewable energy and reducing overall energy consumption within buildings.
Key Topics
- Dynamic heating and cooling capacity: Methods to calculate peak and continuous thermal loads for TABS to meet occupant comfort and energy efficiency requirements.
- Thermo Active Building Systems (TABS) Type V: Specific guidance on dimensioning embedded radiant systems integrating pipes or electric cables within structural layers.
- Heat gains consideration: Incorporation of solar gains, internal heat sources, and ventilation air for realistic capacity calculations.
- Hydraulic and thermal system design: Calculations supporting the correct sizing of water-side cooling equipment and flow rates.
- Thermal comfort criteria: Maintaining occupant comfort based on ISO 11855-1 guidelines and including predicted mean vote (PMV) as a performance indicator.
- Energy saving focus: Strategies that leverage dynamic simulation to reduce energy consumption and heat source sizes.
- Equivalent thermal resistances: Tools for modeling heat transfer resistances between construction layers to aid in building simulation.
Applications
The ISO 11855-4:2021/Amd 1:2023 amendment is practically valuable in several key areas within the building and construction industries:
- Architectural and HVAC design: Professionals can use these calculation methods to design embedded radiant heating and cooling systems that integrate seamlessly into building slabs and core layers.
- Energy-efficient building projects: Designers aiming to implement renewable energy-based climate control can optimize TABS to reduce reliance on conventional heating and cooling systems.
- Simulation of building thermal performance: Enables dynamic computer simulations for evaluating building energy demands and system control strategies.
- Sizing of mechanical equipment: Accurately determines the chiller capacity and fluid flow requirements needed to service TABS, improving system reliability and operational cost savings.
- Compliance and certification: Helps meet standards compliance and support green building certifications by adhering to recognized thermal comfort and heating/cooling capacities guidelines.
Related Standards
ISO 11855-4:2021/Amd 1:2023 works alongside other parts of the ISO 11855 series to provide a comprehensive framework for embedded radiant systems:
- ISO 11855-1: Specifies comfort criteria for embedded radiant heating and cooling for occupant thermal comfort.
- ISO 11855-2: Offers steady-state calculation methods for heating and cooling capacity.
- ISO 11855-3: Details design and dimensioning methods to meet thermal capacity needs.
- ISO 11855-5: Addresses proper installation procedures of embedded radiant systems.
- ISO 11855-6: Provides control methodologies to ensure optimum system performance during operation.
- ISO 11855-7: Contains calculation methods relevant for input parameters used in ISO 52031 for building energy modeling.
Together, these standards support the development, design, installation, and operation of embedded radiant heating and cooling systems worldwide.
Keywords: ISO 11855-4, Thermo Active Building Systems, embedded radiant heating and cooling, dynamic heating capacity, cooling capacity calculation, building environment design, energy-efficient HVAC, radiant cooling system, thermal comfort standards, renewable energy buildings, building simulation, chiller sizing.
Relations
- Effective Date
- 12-Feb-2026
- Effective Date
- 06-Jun-2022
- Effective Date
- 06-Jun-2022
Buy Documents
ISO 11855-4:2021/Amd 1:2023 - Building environment design — Embedded radiant heating and cooling systems — Part 4: Dimensioning and calculation of the dynamic heating and cooling capacity of Thermo Active Building Systems (TABS) — Amendment 1 Released:10/17/2023
ISO 11855-4:2021/Amd 1:2023 - Conception de l'environnement des bâtiments — Systèmes intégrés de chauffage et de refroidissement par rayonnement — Partie 4: Dimensionnement et calculs relatifs au chauffage adiabatique et à la puissance frigorifique pour systèmes d'éléments de construction thermoactifs (TABS) — Amendement 1/1/2023
Get Certified
Connect with accredited certification bodies for this standard
DIBt (Deutsches Institut für Bautechnik)
German Institute for Building Technology.
DIN CERTCO
DIN Group product certification.
Aboma Certification B.V.
Specialized in construction, metal, and transport sectors.
Sponsored listings
Frequently Asked Questions
ISO 11855-4:2021/Amd 1:2023 is a standard published by the International Organization for Standardization (ISO). Its full title is "Building environment design — Embedded radiant heating and cooling systems — Part 4: Dimensioning and calculation of the dynamic heating and cooling capacity of Thermo Active Building Systems (TABS) — Amendment 1". This standard covers: Building environment design — Embedded radiant heating and cooling systems — Part 4: Dimensioning and calculation of the dynamic heating and cooling capacity of Thermo Active Building Systems (TABS) — Amendment 1
Building environment design — Embedded radiant heating and cooling systems — Part 4: Dimensioning and calculation of the dynamic heating and cooling capacity of Thermo Active Building Systems (TABS) — Amendment 1
ISO 11855-4:2021/Amd 1:2023 is classified under the following ICS (International Classification for Standards) categories: 91.040.01 - Buildings in general. The ICS classification helps identify the subject area and facilitates finding related standards.
ISO 11855-4:2021/Amd 1:2023 has the following relationships with other standards: It is inter standard links to EN ISO 11855-4:2021/A1:2023, ISO 3129:2019, ISO 11855-4:2021. Understanding these relationships helps ensure you are using the most current and applicable version of the standard.
ISO 11855-4:2021/Amd 1:2023 is available in PDF format for immediate download after purchase. The document can be added to your cart and obtained through the secure checkout process. Digital delivery ensures instant access to the complete standard document.
Standards Content (Sample)
INTERNATIONAL ISO
STANDARD 11855-4
Second edition
2021-08
AMENDMENT 1
2023-10
Building environment design —
Embedded radiant heating and cooling
systems —
Part 4:
Dimensioning and calculation of the
dynamic heating and cooling capacity
of Thermo Active Building Systems
(TABS)
AMENDMENT 1
Conception de l'environnement des bâtiments — Systèmes intégrés de
chauffage et de refroidissement par rayonnement —
Partie 4: Dimensionnement et calculs relatifs au chauffage
adiabatique et à la puissance frigorifique pour systèmes d'éléments de
construction thermoactifs (TABS)
AMENDEMENT 1
Reference number
ISO 11855-4:2021/Amd.1:2023(E)
ISO 11855-4:2021/Amd.1:2023(E)
© ISO 2023
All rights reserved. Unless otherwise specified, or required in the context of its implementation, no part of this publication may
be reproduced or utilized otherwise in any form or by any means, electronic or mechanical, including photocopying, or posting on
the internet or an intranet, without prior written permission. Permission can be requested from either ISO at the address below
or ISO’s member body in the country of the requester.
ISO copyright office
CP 401 • Ch. de Blandonnet 8
CH-1214 Vernier, Geneva
Phone: +41 22 749 01 11
Email: copyright@iso.org
Website: www.iso.org
Published in Switzerland
ii
ISO 11855-4:2021/Amd.1:2023(E)
Foreword
ISO (the International Organization for Standardization) is a worldwide federation of national standards
bodies (ISO member bodies). The work of preparing International Standards is normally carried out
through ISO technical committees. Each member body interested in a subject for which a technical
committee has been established has the right to be represented on that committee. International
organizations, governmental and non-governmental, in liaison with ISO, also take part in the work.
ISO collaborates closely with the International Electrotechnical Commission (IEC) on all matters of
electrotechnical standardization.
The procedures used to develop this document and those intended for its further maintenance are
described in the ISO/IEC Directives, Part 1. In particular, the different approval criteria needed for the
different types of ISO document should be noted. This document was drafted in accordance with the
editorial rules of the ISO/IEC Directives, Part 2 (see www.iso.org/directives).
ISO draws attention to the possibility that the implementation of this document may involve the use
of (a) patent(s). ISO takes no position concerning the evidence, validity or applicability of any claimed
patent rights in respect thereof. As of the date of publication of this document, ISO had not received
notice of (a) patent(s) which may be required to implement this document. However, implementers are
cautioned that this may not represent the latest information, which may be obtained from the patent
database available at www.iso.org/patents. ISO shall not be held responsible for identifying any or all
such patent rights.
Any trade name used in this document is information given for the convenience of users and does not
constitute an endorsement.
For an explanation of the voluntary nature of standards, the meaning of ISO specific terms and
expressions related to conformity assessment, as well as information about ISO's adherence to
the World Trade Organization (WTO) principles in the Technical Barriers to Trade (TBT), see
www.iso.org/iso/foreword.html.
This document was prepared by Technical Committee ISO/TC 205, Building environment design, in
collaboration with the European Committee for Standardization (CEN) Technical Committee CEN/TC
228, Heating systems and water based cooling systems in buildings, in accordance with the Agreement on
technical cooperation between ISO and CEN (Vienna Agreement).
Any feedback or questions on this document should be directed to the user’s national standards body. A
complete listing of these bodies can be found at www.iso.org/members.html.
iii
ISO 11855-4:2021/Amd.1:2023(E)
Building environment design — Embedded radiant heating
and cooling systems —
Part 4:
Dimensioning and calculation of the
...
NORME ISO
INTERNATIONALE 11855-4
Deuxième édition
2021-08
AMENDEMENT 1
2023-10
Conception de l'environnement des
bâtiments — Systèmes intégrés de
chauffage et de refroidissement par
rayonnement —
Partie 4:
Dimensionnement et calculs
relatifs au chauffage adiabatique
et à la puissance frigorifique pour
systèmes d'éléments de construction
thermoactifs (TABS)
AMENDEMENT 1
Building environment design — Embedded radiant heating and
cooling systems —
Part 4: Dimensioning and calculation of the dynamic heating and
cooling capacity of Thermo Active Building Systems (TABS)
AMENDMENT 1
Numéro de référence
ISO 11855-4:2021/Amd.1:2023(F)
ISO 11855-4:2021/Amd.1:2023(F)
DOCUMENT PROTÉGÉ PAR COPYRIGHT
© ISO 2023
Tous droits réservés. Sauf prescription différente ou nécessité dans le contexte de sa mise en œuvre, aucune partie de cette
publication ne peut être reproduite ni utilisée sous quelque forme que ce soit et par aucun procédé, électronique ou mécanique,
y compris la photocopie, ou la diffusion sur l’internet ou sur un intranet, sans autorisation écrite préalable. Une autorisation peut
être demandée à l’ISO à l’adresse ci-après ou au comité membre de l’ISO dans le pays du demandeur.
ISO copyright office
Case postale 401 • Ch. de Blandonnet 8
CH-1214 Vernier, Genève
Tél.: +41 22 749 01 11
E-mail: copyright@iso.org
Web: www.iso.org
Publié en Suisse
ii
ISO 11855-4:2021/Amd.1:2023(F)
Avant-propos
L'ISO (Organisation internationale de normalisation) est une fédération mondiale d'organismes
nationaux de normalisation (comités membres de l'ISO). L'élaboration des Normes internationales est
en général confiée aux comités techniques de l'ISO. Chaque comité membre intéressé par une étude
a le droit de faire partie du comité technique créé à cet effet. Les organisations internationales,
gouvernementales et non gouvernementales, en liaison avec l'ISO, participent également aux travaux.
L'ISO collabore étroitement avec la Commission électrotechnique internationale (IEC) en ce qui
concerne la normalisation électrotechnique.
Les procédures utilisées pour élaborer le présent document et celles destinées à sa mise à jour sont
décrites dans les Directives ISO/IEC, Partie 1. Il convient, en particulier, de prendre note des différents
critères d'approbation requis pour les différents types de documents ISO. Le présent document
a été rédigé conformément aux règles de rédaction données dans les Directives ISO/IEC, Partie 2
(voir www.iso.org/directives).
L’ISO attire l’attention sur le fait que la mise en application du présent document peut entraîner
l’utilisation d’un ou de plusieurs brevets. L’ISO ne prend pas position quant à la preuve, à la validité
et à l’applicabilité de tout droit de brevet revendiqué à cet égard. À la date de publication du présent
document, l’ISO n'avait pas reçu notification qu’un ou plusieurs brevets pouvaient être nécessaires à sa
mise en application. Toutefois, il y a lieu d’avertir les responsables de la mise en application du présent
document que des informations plus récentes sont susceptibles de figurer dans la base de données de
brevets, disponible à l'adresse www.iso.org/brevets. L’ISO ne saurait être tenue pour responsable de ne
pas avoir identifié de tels droits de brevet.
Les appellations commerciales éventuellement mentionnées dans le présent document sont données
pour information, par souci de commodité, à l’intention des utilisateurs et ne sauraient constituer un
engagement.
Pour une explication de la nature volontaire des normes, la signification des termes et expressions
spécifiques de l'ISO liés à l'évaluation de la conformité, ou pour toute information au sujet de l'adhésion
de l'ISO aux principes de l’Organisation mondiale du commerce (OMC) concernant les obstacles
techniques au commerce (OTC), voir www.iso.org/avant-propos.
Le présent document a été élaboré par le comité technique ISO/TC 205, Conception de l'environnement
intérieur des bâtiments, en collaboration avec le comité technique CEN/TC 228, Systèmes de chauffage
et systèmes de refroidissement à eau dans les bâtiments, du Comité européen de normalisation (CEN),
conformément à l'Accord de coopération technique entre l'ISO et le CEN (Accord de Vienne).
Il convient que l’utilisateur adresse tout retour d’information ou toute question concernant le présent
document à l’organisme national de normalisation de son pays. Une liste exhaustive desdits organismes
se trouve à l’adresse www.iso.org/members.html.
iii
ISO 11855-4:2021/Amd.1:2023(F)
Conception de l'environnement des bâtiments —
Systèmes intégrés de chauffage et de refroidissement par
rayonnement —
Partie 4:
Dimensionnement et calculs relatifs au chauffage
adiabatique et à la puissance frigorifique pour systèmes
d'éléments de construction thermoactifs (TABS)
AMENDEMENT 1
Introduction, dernier alinéa
Modifier comme suit:
L’ISO 11855-1 spécifie les critères de confort dont i
...