ISO 8575:2016

INTERNATIONAL ISO
STANDARD 8575
Second edition
2016-11-15
Aerospace — Fluid systems —
Hydraulic system tubing
Série aérospatiale — Systèmes de fluides — Tubes pour systèmes
hydrauliques
Reference number
ISO 8575:2016(E)
©
ISO 2016

---------------------- Page: 1 ----------------------
ISO 8575:2016(E)

COPYRIGHT PROTECTED DOCUMENT
© ISO 2016, Published in Switzerland
All rights reserved. Unless otherwise specified, no part of this publication may be reproduced or utilized otherwise in any form
or by any means, electronic or mechanical, including photocopying, or posting on the internet or an intranet, without prior
written permission. Permission can be requested from either ISO at the address below or ISO’s member body in the country of
the requester.
ISO copyright office
Ch. de Blandonnet 8 • CP 401
CH-1214 Vernier, Geneva, Switzerland
Tel. +41 22 749 01 11
Fax +41 22 749 09 47
copyright@iso.org
www.iso.org
ii © ISO 2016 – All rights reserved

---------------------- Page: 2 ----------------------
ISO 8575:2016(E)

Contents Page
Foreword .iv
Introduction .v
1 Scope . 1
2 Normative references . 1
3 Terms and definitions . 1
4 Requirements . 1
4.1 General . 1
4.2 Pressure lines . 2
4.2.1 Tubing material . 2
4.2.2 Tube sizes . 2
4.2.3 Qualification . 2
4.3 Suction and return lines . 2
4.3.1 Tubing Material . 2
4.3.2 Tube sizes . 2
Annex A (informative) Aerospace hydraulic tubing materials . 8
Bibliography . 9
© ISO 2016 – All rights reserved iii

---------------------- Page: 3 ----------------------
ISO 8575:2016(E)

Foreword
ISO (the International Organization for Standardization) is a worldwide federation of national standards
bodies (ISO member bodies). The work of preparing International Standards is normally carried out
through ISO technical committees. Each member body interested in a subject for which a technical
committee has been established has the right to be represented on that committee. International
organizations, governmental and non-governmental, in liaison with ISO, also take
...